Page 1 of 48
CSA W47.1 2026 PRACTICE VERSION 2 EXAM
COMPLETE (100) CURRENT TESTING
QUESTIONS AND CORRECT ANSWERS WITH
DETAILED EXPLANATIONS|GUARANTEED
PASS.
CSA W47.1
Prepare for the CSA W47.1 Practice version 2 Exam with practice
questions covering welding standards, quality control, safety
procedures, fabrication requirements, and certification guidelines.
This study resource helps reinforce essential knowledge required for
welding supervision and industry and improve technical
understanding in welding operations. Suitable for welding,
manufacturing, and industrial trade professionals.
Multiple choice.
Section 1: General Requirements & Certification (Questions
1–10)
1. According to CSA W47.1, the certified company is
responsible for which of the following?
A) Only the welding procedures
B) Only the welder qualifications
C) The quality of the welded product, including all
welding-related activities
D) Only the inspection of final welds
, Page 2 of 48
Answer: C. The quality of the welded product, including all
welding-related activities
Explanation: Clause 1.2 states that the certified company
has full responsibility for the quality of the welded product it
produces, and this responsibility cannot be transferred to
personnel or the administrator.
2. Which of the following is an essential requirement for a
company to become certified under CSA W47.1?
A) Possession of a quality control manual
B) A minimum of five years in business
C) A registered trademark
D) ISO 9001 certification
Answer: A. Possession of a quality control manual
Explanation: The company must document its welding
quality system, including a quality control manual, as part of
the certification requirements.
3. Who must a certified company notify immediately in the
event of a change in welding engineering or supervisory
personnel?
A) The local welding supply distributor
B) The CWB Group (Canadian Welding Bureau)
C) The company’s customers
D) The provincial ministry of labour
Answer: B. The CWB Group (Canadian Welding Bureau)
Explanation: The standard requires immediate notification to
, Page 3 of 48
the CWB of any loss or change in welding engineering or
supervisory personnel to maintain certification validity.
4. What is the maximum time allowed for a certified
company to provide evidence that welded connections have
been designed as required by the governing standard (Clause
5.1.8)?
A) At the time of each audit
B) Only upon initial certification
C) Within 30 days of a request
D) Before the next scheduled audit
Answer: A. At the time of each audit
Explanation: Clause 5.1.8 requires the company to provide
evidence that welded connections have been designed as
required by the governing standard; this evidence is
reviewed during audits.
5. True or False: Certification under CSA W47.1 guarantees
that a company’s products are defect-free.
A) True
B) False
Answer: B. False
Explanation: Clause 1.3 states that certification pertains
only to the capability of the company with respect to welding
and should not be construed as approving any products or
services.
, Page 4 of 48
6. Which of the following documents must be maintained by
a certified company to demonstrate control of welding
operations?
A) A list of all employee birthdays
B) Welding Procedure Specifications (WPS) and Welder
Qualification Records
C) The company’s annual financial statements
D) A log of all office supplies purchased
Answer: B. Welding Procedure Specifications (WPS) and
Welder Qualification Records
Explanation: These are core documents required by the
standard to demonstrate that welding is performed
according to qualified procedures by qualified personnel.
7. Under CSA W47.1, an “audit” of a certified company is
conducted by:
A) The company’s own internal auditors
B) The CWB Group (or an authorized administrator)
C) The customer’s quality department
D) Provincial regulatory bodies
Answer: B. The CWB Group (or an authorized administrator)
Explanation: The CWB is the accredited administrator that
performs initial and periodic audits to verify compliance
with the standard.
8. A company that performs only field erection welding (no
fixed plant) must still be certified under CSA W47.1. What
CSA W47.1 2026 PRACTICE VERSION 2 EXAM
COMPLETE (100) CURRENT TESTING
QUESTIONS AND CORRECT ANSWERS WITH
DETAILED EXPLANATIONS|GUARANTEED
PASS.
CSA W47.1
Prepare for the CSA W47.1 Practice version 2 Exam with practice
questions covering welding standards, quality control, safety
procedures, fabrication requirements, and certification guidelines.
This study resource helps reinforce essential knowledge required for
welding supervision and industry and improve technical
understanding in welding operations. Suitable for welding,
manufacturing, and industrial trade professionals.
Multiple choice.
Section 1: General Requirements & Certification (Questions
1–10)
1. According to CSA W47.1, the certified company is
responsible for which of the following?
A) Only the welding procedures
B) Only the welder qualifications
C) The quality of the welded product, including all
welding-related activities
D) Only the inspection of final welds
, Page 2 of 48
Answer: C. The quality of the welded product, including all
welding-related activities
Explanation: Clause 1.2 states that the certified company
has full responsibility for the quality of the welded product it
produces, and this responsibility cannot be transferred to
personnel or the administrator.
2. Which of the following is an essential requirement for a
company to become certified under CSA W47.1?
A) Possession of a quality control manual
B) A minimum of five years in business
C) A registered trademark
D) ISO 9001 certification
Answer: A. Possession of a quality control manual
Explanation: The company must document its welding
quality system, including a quality control manual, as part of
the certification requirements.
3. Who must a certified company notify immediately in the
event of a change in welding engineering or supervisory
personnel?
A) The local welding supply distributor
B) The CWB Group (Canadian Welding Bureau)
C) The company’s customers
D) The provincial ministry of labour
Answer: B. The CWB Group (Canadian Welding Bureau)
Explanation: The standard requires immediate notification to
, Page 3 of 48
the CWB of any loss or change in welding engineering or
supervisory personnel to maintain certification validity.
4. What is the maximum time allowed for a certified
company to provide evidence that welded connections have
been designed as required by the governing standard (Clause
5.1.8)?
A) At the time of each audit
B) Only upon initial certification
C) Within 30 days of a request
D) Before the next scheduled audit
Answer: A. At the time of each audit
Explanation: Clause 5.1.8 requires the company to provide
evidence that welded connections have been designed as
required by the governing standard; this evidence is
reviewed during audits.
5. True or False: Certification under CSA W47.1 guarantees
that a company’s products are defect-free.
A) True
B) False
Answer: B. False
Explanation: Clause 1.3 states that certification pertains
only to the capability of the company with respect to welding
and should not be construed as approving any products or
services.
, Page 4 of 48
6. Which of the following documents must be maintained by
a certified company to demonstrate control of welding
operations?
A) A list of all employee birthdays
B) Welding Procedure Specifications (WPS) and Welder
Qualification Records
C) The company’s annual financial statements
D) A log of all office supplies purchased
Answer: B. Welding Procedure Specifications (WPS) and
Welder Qualification Records
Explanation: These are core documents required by the
standard to demonstrate that welding is performed
according to qualified procedures by qualified personnel.
7. Under CSA W47.1, an “audit” of a certified company is
conducted by:
A) The company’s own internal auditors
B) The CWB Group (or an authorized administrator)
C) The customer’s quality department
D) Provincial regulatory bodies
Answer: B. The CWB Group (or an authorized administrator)
Explanation: The CWB is the accredited administrator that
performs initial and periodic audits to verify compliance
with the standard.
8. A company that performs only field erection welding (no
fixed plant) must still be certified under CSA W47.1. What
