Progression: Field Tech V - VI Conventional Exam
Newest 2026/2027 Questions and Correct Detailed
Answers Already Graded A+
What is the most common location for the RJ31X jack? - CORRECT ANSWER-
Because it is wired between the alarm panel, and the premises, thereby helping
to reduce potential problems in the customer premises wiring.
Which of the following accurately describes the proper wiring of an RJ31X jack? -
CORRECT ANSWER-The tip and ring from the embedded multimedia terminal
adapter (EMTA) are terminated to the green and red terminals in the jack.
Which of the following is true about a properly wired RJ31X jack? - CORRECT
ANSWER-It allows the alarm panel to isolate itself from the premises wiring and
disable the phone line when it needs to alert the monitoring location about an
alarm
activation.
Which concept has enabled Software as a Service (SaaS), Platform as a Service
(PaaS), and Networking as a Service (NaaS) offerings? - CORRECT ANSWER-The
separation of the transport and connectivity from the applications and
,services running atop the transport.
Which piece of equipment in a VoIP (voice over Internet protocol) phone system
routes a call to the public switched telephone network (PSTN) when the receiving
location is from outside the Packet Cable managed IP network? - CORRECT
ANSWER-Gateway
What are the three sub-network interfaces managed by PacketCable? -
CORRECT ANSWER-Hybrid fiber/coax (HFC), managed IP, and public switched
telephone
network (PSTN).
Why is PacketCable VoIP (voice over Internet protocol) a more efficient way of
handling calls? - CORRECT ANSWER-Most cable operators have built their own
IP telephone networks that use
Internet protocol rules.
Which of the voice over Internet protocol (VoIP) service tiers bypasses the cable
operators direct link to the public switched telephone network (PSTN) and routes
, packets over the Internet to another telephone company? - CORRECT
ANSWER-Tier II Secondary VoIP.
When a call is made from a phone that is on a managed IP phone system to a
phone
that is outside the managed IP phone system, how does the call get routed to the
receiving phone? - CORRECT ANSWER-The gateway down-converts the digital
data to an analog electrical signal
format and routes the call to the public switched telephone network (PSTN).
Because a cable operator will support as many lines as technically possible for a
business customer, what does the installer have to do prior to connecting the
embedded multimedia terminal adapter (EMTA)? - CORRECT ANSWER-Check
the RF signal levels on the cable entering the building.
When a PBX or key system is involved in a business installation, the installer can
set
up the embedded multimedia terminal adapters ( EMTA ) and cable, but what has
to
Newest 2026/2027 Questions and Correct Detailed
Answers Already Graded A+
What is the most common location for the RJ31X jack? - CORRECT ANSWER-
Because it is wired between the alarm panel, and the premises, thereby helping
to reduce potential problems in the customer premises wiring.
Which of the following accurately describes the proper wiring of an RJ31X jack? -
CORRECT ANSWER-The tip and ring from the embedded multimedia terminal
adapter (EMTA) are terminated to the green and red terminals in the jack.
Which of the following is true about a properly wired RJ31X jack? - CORRECT
ANSWER-It allows the alarm panel to isolate itself from the premises wiring and
disable the phone line when it needs to alert the monitoring location about an
alarm
activation.
Which concept has enabled Software as a Service (SaaS), Platform as a Service
(PaaS), and Networking as a Service (NaaS) offerings? - CORRECT ANSWER-The
separation of the transport and connectivity from the applications and
,services running atop the transport.
Which piece of equipment in a VoIP (voice over Internet protocol) phone system
routes a call to the public switched telephone network (PSTN) when the receiving
location is from outside the Packet Cable managed IP network? - CORRECT
ANSWER-Gateway
What are the three sub-network interfaces managed by PacketCable? -
CORRECT ANSWER-Hybrid fiber/coax (HFC), managed IP, and public switched
telephone
network (PSTN).
Why is PacketCable VoIP (voice over Internet protocol) a more efficient way of
handling calls? - CORRECT ANSWER-Most cable operators have built their own
IP telephone networks that use
Internet protocol rules.
Which of the voice over Internet protocol (VoIP) service tiers bypasses the cable
operators direct link to the public switched telephone network (PSTN) and routes
, packets over the Internet to another telephone company? - CORRECT
ANSWER-Tier II Secondary VoIP.
When a call is made from a phone that is on a managed IP phone system to a
phone
that is outside the managed IP phone system, how does the call get routed to the
receiving phone? - CORRECT ANSWER-The gateway down-converts the digital
data to an analog electrical signal
format and routes the call to the public switched telephone network (PSTN).
Because a cable operator will support as many lines as technically possible for a
business customer, what does the installer have to do prior to connecting the
embedded multimedia terminal adapter (EMTA)? - CORRECT ANSWER-Check
the RF signal levels on the cable entering the building.
When a PBX or key system is involved in a business installation, the installer can
set
up the embedded multimedia terminal adapters ( EMTA ) and cable, but what has
to
