FIREFIGHTER PRACTICE COMPREHENSIVE TEST
PAPER WITH COMPLETE SOLUTIONS
◉ When cutting through a roof, a firefighter should avoid:
A. removing the built-up material prior to cutting
B. cutting through joists, rafters, or trusses
C. making one large opening
D. using a power saw.
Answer: B. cutting through joists, rafters, or trusses
◉ Which of the following is an advantage of the flat load?
A. Only four people are required to perform the load
B. It is the best way to load large-diameter hose
C. Hose loaded in this manner has fewer sharp bends than other
loads
D. Hose for shoulder carries can easily be taken from the load.
Answer: B. It is the best way to load large-diameter hose
◉ Which of the following statements IS CORRECT regarding fire
extinguishers and combustible metals?
A. All chemical agents need to be applied with a shovel or scoop
,B. No single agent will control or extinguish fires in all combustible
metals
C. The agent needs to break the crust that may form over any
burning metal to extinguish the fire
D. They come in pressurized and handheld models.
Answer: B. No single agent will control or extinguish fires in all
combustible metals
◉ A common factor with regard to multiple firefighter deaths at
emergency incidents is:
A. the lack of an organized, effective command structure
B. they all involved industrial complexes
C. all the incidents occurred during forest fires
D. they all occurred in urban settings.
Answer: A. the lack of an organized, effective command structure
◉ Which of the following is one of the stages/phases of fire burn?
A. Rollover
B. Fully developed
C. Backdraft
D. Initial.
Answer: B. Fully developed
,◉ Which of the following IS TRUE regarding personal protective
clothing?
A. It requires firefighters to wear the most appropriate PPE for the
hazard they face
B. It must comply with NFPA 1900 standard
C. It prevents a firefighter from burns in situations such as flashover
D. It requires PASS activation whenever bunker gear is worn.
Answer: A. It requires firefighters to wear the most appropriate PPE
for the hazard they face
◉ A fire CANNOT BE considered fully extinguished until __________ is
complete.
A. overhaul
B. primary search
C. cause determination
D. secondary search.
Answer: A. overhaul
◉ For an area to qualify as a light hazard, the majority of materials
must meet one requirements. One of those is that they must:
A. be UL listed
B. have ignition temperatures in excess of 451F
C. be necessary for the work of the area
, D. be noncombustible.
Answer: D. be noncombustible
◉ What type of listening is required by a telecommunicator to draw
out all the necessary information from a caller who may be excited,
confused, or dealing with a language barrier?
A. Presumptive
B. Active
C. Selective
D. Modal.
Answer: B. Active
◉ After a roof has been opened up, the firefighter must:
A. remove any natural roof openings
B. make another opening on the opposite side of the pitched roof
C. ensure the ceiling below the cut is opened
D. direct a hose line into the opening.
Answer: C. ensure the ceiling below the cut is opened
◉ How are flammability limits and explosive limits related?
A. Explosive limits are used to calculate flammability limits
PAPER WITH COMPLETE SOLUTIONS
◉ When cutting through a roof, a firefighter should avoid:
A. removing the built-up material prior to cutting
B. cutting through joists, rafters, or trusses
C. making one large opening
D. using a power saw.
Answer: B. cutting through joists, rafters, or trusses
◉ Which of the following is an advantage of the flat load?
A. Only four people are required to perform the load
B. It is the best way to load large-diameter hose
C. Hose loaded in this manner has fewer sharp bends than other
loads
D. Hose for shoulder carries can easily be taken from the load.
Answer: B. It is the best way to load large-diameter hose
◉ Which of the following statements IS CORRECT regarding fire
extinguishers and combustible metals?
A. All chemical agents need to be applied with a shovel or scoop
,B. No single agent will control or extinguish fires in all combustible
metals
C. The agent needs to break the crust that may form over any
burning metal to extinguish the fire
D. They come in pressurized and handheld models.
Answer: B. No single agent will control or extinguish fires in all
combustible metals
◉ A common factor with regard to multiple firefighter deaths at
emergency incidents is:
A. the lack of an organized, effective command structure
B. they all involved industrial complexes
C. all the incidents occurred during forest fires
D. they all occurred in urban settings.
Answer: A. the lack of an organized, effective command structure
◉ Which of the following is one of the stages/phases of fire burn?
A. Rollover
B. Fully developed
C. Backdraft
D. Initial.
Answer: B. Fully developed
,◉ Which of the following IS TRUE regarding personal protective
clothing?
A. It requires firefighters to wear the most appropriate PPE for the
hazard they face
B. It must comply with NFPA 1900 standard
C. It prevents a firefighter from burns in situations such as flashover
D. It requires PASS activation whenever bunker gear is worn.
Answer: A. It requires firefighters to wear the most appropriate PPE
for the hazard they face
◉ A fire CANNOT BE considered fully extinguished until __________ is
complete.
A. overhaul
B. primary search
C. cause determination
D. secondary search.
Answer: A. overhaul
◉ For an area to qualify as a light hazard, the majority of materials
must meet one requirements. One of those is that they must:
A. be UL listed
B. have ignition temperatures in excess of 451F
C. be necessary for the work of the area
, D. be noncombustible.
Answer: D. be noncombustible
◉ What type of listening is required by a telecommunicator to draw
out all the necessary information from a caller who may be excited,
confused, or dealing with a language barrier?
A. Presumptive
B. Active
C. Selective
D. Modal.
Answer: B. Active
◉ After a roof has been opened up, the firefighter must:
A. remove any natural roof openings
B. make another opening on the opposite side of the pitched roof
C. ensure the ceiling below the cut is opened
D. direct a hose line into the opening.
Answer: C. ensure the ceiling below the cut is opened
◉ How are flammability limits and explosive limits related?
A. Explosive limits are used to calculate flammability limits
