FULL NHIE EXAM PRACTICE
1. Where you've got observed evidence of footing settlement, how can you predict whether or
not there might be further settlement?
(a) You can be counted the wide variety of planes of motion.
(b) You can determine the type of basis fabric.
(c) You can't predict agreement from a unmarried inspection.
(d) You can decide the depth of the footing.
You can not are expecting settlement from a single inspection
2. You normally discover a Freon leak
(a) As an oil stain
(b) As refrigerant coming out of the Freon line in the form of a cold mist.
(c) By the strong scent.
(d) By looking for proof of ice alongside the refrigerant lines
As an oil stain
3. Typical wood body wall assemblies consist of all the following components EXCEPT.
(a) Studs
(b) Bridging
(c) Sheathing
(d) Siding
Bridging
4. All of the following are common tactics to improving chimney draft EXCEPT
(a) Adding a draft inducer fan.
(b) Adding a rain cap.
(c) Extending the chimney upward.
(d) Resloping the cap.
Resloping the cap
5. All of the following statements are true of shrinkage cracks EXCEPT that
(a) Shrinkage cracks do not usually go into the footings.
,(b) Shrinkage cracks do no longer necessarily have corresponding cracks
someplace else within the building.
(c) Vertical shear is related to shrinkage cracks.
(d) Shrinkage cracks are not unusual with poured concrete basis
partitions.
Vertical shear is related to shrinkage cracks
6. Which of the subsequent is NOT normally a issue of a non-public water supply system?
(a) Foot valve
(b) Pump
(c) Pressure regulator
(d) Pressure tank
Pressure regulator
7. Split-gadget, air-cooled, imperative air-conditioning systems have how many lovers?
(a) None
(b) One
(c) Two
(d) Four
Two
eight. Insulated metallic exterior doors with storm doors have to be avoided due to the fact they
may
(a) Increase warmness loss.
(b) Increase air leakage.
(c) Overheat.
(d) Have poor architectural appeal.
Overheat
9. You plug your circuit tester into an outlet that has a washing machine plugged into it. Your
tester suggests that the opening is well stressed out and grounded. How could you enhance this
inspection technique?
(a) Use a voltage tester
(b) Use a circuit tester with a GFI take a look at button
(c) Unplug the washing device
(d) Turn the showering gadget on before doing all of your check.
,Unplug the washing device
10. Given a basis wall that is cracked due to horizontal pressure
(a) You will no longer be capable of determine whether or not the wall has additionally moved
inward.
(b) If the wall has moved inward, the cracks might normally be wider on the internal face.
(c) If the wall has moved inward, cracks will normally be wider at the outside face.
(d) You should not be concerned until the crack is at the least ¼ in width.
If the wall has moved inward, the cracks might usually be wider on the internal face
11. On most steep roofs, exposed fasteners are
(a) Used for anchorage in opposition to wind.
(b) A signal of negative installation.
(c) A sign of exact installation.
(d) Used to save you ice dams.
A signal of negative installation
12. All of the subsequent are slab-on-grade-construction techniques EXCEPT
(a) Monolithic slab.
(b) Floating slab.
(c) Inverted slab.
(d) Reinforced slab.
Inverted slab
thirteen. Masonry chimneys must have a clearance from flamable framing participants of
(a) 1 inch.
(b) 2 inches.
(c) four inches.
(d) 12 inches.
2 inches
14. Efflorescence
(a) Is associated with water moving via masonry partitions.
(b) Can most effective seem on the cold aspect of a wall.
, (c) Only happens in freezing climates.
(d) Is an organic boom.
Is related to water shifting thru masonry walls
15. On a conventional cut up-machine air-conditioning device, the excessive-stress facet is the
part of the refrigerant line from the
(a) Compressor to the growth tool.
(b) Metering tool to the evaporator coil.
(c) Expansion tool to the compressor.
(d) Evaporator to the compressor.
Compressor to the growth tool.
Sixteen. The presence of step flashing on an asphalt shingle roof can commonly be confirmed
by
(a) Looking at the counter flashing.
(b) Knowing the age of the shingles on the roof.
(c) Knowing the wide variety of layers of shingles on the roof.
(d) Lifting the shingles adjoining to the chimney or wall
Lifting the shingles adjacent to the chimney or wall
17. Why are you more likely to peer a house with a complete basement in cold northern
climates than in warm southern climates?
(a) People in bloodless climates have snow removal device to store.
(b) Having to excavate below the frost line for the footings makes a basement value powerful.
(c) Homes with basements need warmth. In southern climates, it's miles a waste of power to
heat the basement.
(d) There is a lot of bedrock inside the southern climates " blasting could be required to make a
basement.
Having to excavate below the frost line for the footings makes a basement value effective.
18. All of the subsequent are benefits to having clients attend inspections EXCEPT
(a) An opportunity for better communication.
(b) You can rate a top class for allowing customers to wait.
(c) That displaying is better than telling.
(d) You have the possibility to regulate expectations.
You can fee a top class for permitting clients to attend
1. Where you've got observed evidence of footing settlement, how can you predict whether or
not there might be further settlement?
(a) You can be counted the wide variety of planes of motion.
(b) You can determine the type of basis fabric.
(c) You can't predict agreement from a unmarried inspection.
(d) You can decide the depth of the footing.
You can not are expecting settlement from a single inspection
2. You normally discover a Freon leak
(a) As an oil stain
(b) As refrigerant coming out of the Freon line in the form of a cold mist.
(c) By the strong scent.
(d) By looking for proof of ice alongside the refrigerant lines
As an oil stain
3. Typical wood body wall assemblies consist of all the following components EXCEPT.
(a) Studs
(b) Bridging
(c) Sheathing
(d) Siding
Bridging
4. All of the following are common tactics to improving chimney draft EXCEPT
(a) Adding a draft inducer fan.
(b) Adding a rain cap.
(c) Extending the chimney upward.
(d) Resloping the cap.
Resloping the cap
5. All of the following statements are true of shrinkage cracks EXCEPT that
(a) Shrinkage cracks do not usually go into the footings.
,(b) Shrinkage cracks do no longer necessarily have corresponding cracks
someplace else within the building.
(c) Vertical shear is related to shrinkage cracks.
(d) Shrinkage cracks are not unusual with poured concrete basis
partitions.
Vertical shear is related to shrinkage cracks
6. Which of the subsequent is NOT normally a issue of a non-public water supply system?
(a) Foot valve
(b) Pump
(c) Pressure regulator
(d) Pressure tank
Pressure regulator
7. Split-gadget, air-cooled, imperative air-conditioning systems have how many lovers?
(a) None
(b) One
(c) Two
(d) Four
Two
eight. Insulated metallic exterior doors with storm doors have to be avoided due to the fact they
may
(a) Increase warmness loss.
(b) Increase air leakage.
(c) Overheat.
(d) Have poor architectural appeal.
Overheat
9. You plug your circuit tester into an outlet that has a washing machine plugged into it. Your
tester suggests that the opening is well stressed out and grounded. How could you enhance this
inspection technique?
(a) Use a voltage tester
(b) Use a circuit tester with a GFI take a look at button
(c) Unplug the washing device
(d) Turn the showering gadget on before doing all of your check.
,Unplug the washing device
10. Given a basis wall that is cracked due to horizontal pressure
(a) You will no longer be capable of determine whether or not the wall has additionally moved
inward.
(b) If the wall has moved inward, the cracks might normally be wider on the internal face.
(c) If the wall has moved inward, cracks will normally be wider at the outside face.
(d) You should not be concerned until the crack is at the least ¼ in width.
If the wall has moved inward, the cracks might usually be wider on the internal face
11. On most steep roofs, exposed fasteners are
(a) Used for anchorage in opposition to wind.
(b) A signal of negative installation.
(c) A sign of exact installation.
(d) Used to save you ice dams.
A signal of negative installation
12. All of the subsequent are slab-on-grade-construction techniques EXCEPT
(a) Monolithic slab.
(b) Floating slab.
(c) Inverted slab.
(d) Reinforced slab.
Inverted slab
thirteen. Masonry chimneys must have a clearance from flamable framing participants of
(a) 1 inch.
(b) 2 inches.
(c) four inches.
(d) 12 inches.
2 inches
14. Efflorescence
(a) Is associated with water moving via masonry partitions.
(b) Can most effective seem on the cold aspect of a wall.
, (c) Only happens in freezing climates.
(d) Is an organic boom.
Is related to water shifting thru masonry walls
15. On a conventional cut up-machine air-conditioning device, the excessive-stress facet is the
part of the refrigerant line from the
(a) Compressor to the growth tool.
(b) Metering tool to the evaporator coil.
(c) Expansion tool to the compressor.
(d) Evaporator to the compressor.
Compressor to the growth tool.
Sixteen. The presence of step flashing on an asphalt shingle roof can commonly be confirmed
by
(a) Looking at the counter flashing.
(b) Knowing the age of the shingles on the roof.
(c) Knowing the wide variety of layers of shingles on the roof.
(d) Lifting the shingles adjoining to the chimney or wall
Lifting the shingles adjacent to the chimney or wall
17. Why are you more likely to peer a house with a complete basement in cold northern
climates than in warm southern climates?
(a) People in bloodless climates have snow removal device to store.
(b) Having to excavate below the frost line for the footings makes a basement value powerful.
(c) Homes with basements need warmth. In southern climates, it's miles a waste of power to
heat the basement.
(d) There is a lot of bedrock inside the southern climates " blasting could be required to make a
basement.
Having to excavate below the frost line for the footings makes a basement value effective.
18. All of the subsequent are benefits to having clients attend inspections EXCEPT
(a) An opportunity for better communication.
(b) You can rate a top class for allowing customers to wait.
(c) That displaying is better than telling.
(d) You have the possibility to regulate expectations.
You can fee a top class for permitting clients to attend
