TSA Engineering Exam with all Correct & 100% Verified Answers |Actual
Complete Update |Already Graded A+
1. Define and explain the concept
of iteration Repeating a process.
activity of returning to a previous step in the
design process.
2. Compare and contrast precision
vs accuracy
Precision- how close points are together.
Accuracy- how close a measurement is to the
3. differentiate between DC and AC true value.
in terms of signal output,
direction, and
A device used to measure AC wavelength-
various uses
Oscillo-scope. AC- alternating current. AC is used
to deliver power to houses, buildings, etc.
Alternating current describes the flow of
charge that changes direction periodically. As
a result, the voltage level also reverses along
with the current.
A device used to measure DC wavelength- DC
volt-meter. DC- Direct current. DC is used in any
electronic device with a battery. Direct current is
an electric current that is unidirectional, so the
flow of charge is always in the same direction.
4. Define test-driven design A method that produces the test before the
software
is created.
5. Compare and contrast passive solar Passive solar heating systems capture
sunlight within
heating and solar power generation the building's materials and then release
that heat
during periods when the sun is absent. EX)
South Facing Windows.
1/
24
, TSA Engineering Exam with all Correct & 100% Verified Answers |Actual
Complete Update |Already Graded A+
Solar power is the conversion of energy from
sunlight into electricity. EX) Solar Panels.
6.
2/
24
, TSA Engineering Exam with all Correct & 100% Verified Answers |Actual
Complete Update |Already Graded A+
Be able to identify ethical -Respecting others and ourselves.
engineer-ing practices
-Respecting the rights of others.
-Keeping promises.
-Avoiding unnecessary problems for others.
-Avoiding cheating and dishonesty.
-Showing gratitude towards others and encouraging
7. Be able to discuss them to work.
strength-to-weight ratios and how
they affect the design It helps them to determine the weight of a given
material or component and compare it to its
perfor-mance in a given application.EX)
aluminum vs. steel
8. mathematical design description of a system using mathematical
con-cepts. measurement, alignment,
proportions, and ratios. Dynamical systems,
statistical models, ditter-ential equations, or
game theoretic models.
9. Physical Design Logical models are converted into physical
models. the process of choosing specific
structures and ac-cess paths. the circuit, the
architecture, and the layout generation.
10. Conceptual Design Overview of the system, does not include
hardware or software choices.
looking at the idea of conceptual
architecture. The sole focus of the design is
on the idea, rather than a combination of
approaches and processes.
11. define the engineering process A series of steps that engineers follow to find a
3/
24
Complete Update |Already Graded A+
1. Define and explain the concept
of iteration Repeating a process.
activity of returning to a previous step in the
design process.
2. Compare and contrast precision
vs accuracy
Precision- how close points are together.
Accuracy- how close a measurement is to the
3. differentiate between DC and AC true value.
in terms of signal output,
direction, and
A device used to measure AC wavelength-
various uses
Oscillo-scope. AC- alternating current. AC is used
to deliver power to houses, buildings, etc.
Alternating current describes the flow of
charge that changes direction periodically. As
a result, the voltage level also reverses along
with the current.
A device used to measure DC wavelength- DC
volt-meter. DC- Direct current. DC is used in any
electronic device with a battery. Direct current is
an electric current that is unidirectional, so the
flow of charge is always in the same direction.
4. Define test-driven design A method that produces the test before the
software
is created.
5. Compare and contrast passive solar Passive solar heating systems capture
sunlight within
heating and solar power generation the building's materials and then release
that heat
during periods when the sun is absent. EX)
South Facing Windows.
1/
24
, TSA Engineering Exam with all Correct & 100% Verified Answers |Actual
Complete Update |Already Graded A+
Solar power is the conversion of energy from
sunlight into electricity. EX) Solar Panels.
6.
2/
24
, TSA Engineering Exam with all Correct & 100% Verified Answers |Actual
Complete Update |Already Graded A+
Be able to identify ethical -Respecting others and ourselves.
engineer-ing practices
-Respecting the rights of others.
-Keeping promises.
-Avoiding unnecessary problems for others.
-Avoiding cheating and dishonesty.
-Showing gratitude towards others and encouraging
7. Be able to discuss them to work.
strength-to-weight ratios and how
they affect the design It helps them to determine the weight of a given
material or component and compare it to its
perfor-mance in a given application.EX)
aluminum vs. steel
8. mathematical design description of a system using mathematical
con-cepts. measurement, alignment,
proportions, and ratios. Dynamical systems,
statistical models, ditter-ential equations, or
game theoretic models.
9. Physical Design Logical models are converted into physical
models. the process of choosing specific
structures and ac-cess paths. the circuit, the
architecture, and the layout generation.
10. Conceptual Design Overview of the system, does not include
hardware or software choices.
looking at the idea of conceptual
architecture. The sole focus of the design is
on the idea, rather than a combination of
approaches and processes.
11. define the engineering process A series of steps that engineers follow to find a
3/
24
