OSHA BASIC ORIENTATION EXAM STUDY
GUIDE 2026/2027 ACCURATE QUESTIONS
WITH CORRECT DETAILED SOLUTIONS ||
100% GUARANTEED PASS
<NEWEST VERSION>
1. What is the most frequently cited OSHA violation? - ANSWER ✔ Fall
Protection
2. What key elements are essential to recognizing hazards and reducing or
eliminating workplace hazards? - ANSWER ✔ Management commitment
and employee involvement
3. You are encouraged to ask your coworkers/supervisor for information
whenever you have a problem or are in doubt about what to do on a job? -
ANSWER ✔ True
4. It is your responsibility to follow all safety regulations, inform your
employer of any unsafe condition; report all injuries no matter how minor
they seem and wear the proper personal protective equipment? - ANSWER
✔ True
5. The OSHA standard that addresses the requirements for preventing and
lessening the results of a bad release of toxic, reactive, flammable, or highly
explosive hazardous chemicals from a process - ANSWER ✔ Process
safety management Standard
6. The process Hazard Analysis (PHA) is one of the most important parts of the
PSM program. PHAs are used to identify and evaluate major processes and
ensure they are - ANSWER ✔ Evaluated, Controlled, and Identified
,7. In the PSM standard OSHA states employees must be trained if they work
with highly hazardous chemicals. - ANSWER ✔ True
8. Facilities are not permitted to control your entrance and exit in covered
process areas. - ANSWER ✔ False
9. What should be your first concern from the moment you enter the work site?
- ANSWER ✔ Safety
10.Under the Stop Work Authority, you have the right and obligation to stop a
work activity if you have reason to believe your own safety or a coworkers
safety is in jeopardy or if the work plan is not clearly established or
understood . - ANSWER ✔ True
11.What's needed in order to operate a plant-owned vehicle or mobile
equipment while at a facility - ANSWER ✔ qualified only authorized only
12.What type of work permits you may encounter on the job - ANSWER ✔
safe work permits confined space entry permits, hot work permits, line entry
or line breaking permits, lockout/tagout permits
13.What is the most frequently cited OSHA violation? - ANSWER ✔ Fall
protection
14.Key elements in recognizing hazards and reducing/eliminating workplace
hazards - ANSWER ✔ a. Management Leadership
b. Hazard Prevention and Control
c. Program Evaluation and Improvement
d. Worker Protection
e. Multi-employer Work sites
f. Hazard Identification and Assessment
g. Education and Training
15.You are encouraged to ask your______ for information whenever you have a
problem or are in doubt about what to do on a job - ANSWER ✔
supervisor
, 16.True/False: It is your responsibility to follow all safety regulations, inform
your employers of any unsafe condition; report all injuries (no matter how
minor); and wear the proper personal protective equipment - ANSWER ✔
True
17.PPE - ANSWER ✔ personal protective equipment
18.Process Safety Management standard - ANSWER ✔ OSHA standard that
addresses the requirements for preventing and lessening the results of a bad
release of toxic, reactive, flammable, or high explosive hazardous chemicals
from a process
19.The ____________ is one of the most important parts of the PSM program. -
ANSWER ✔ Process Hazard Analysis
20.PHAs are used to identify and evaluate major processes and ensure they are:
- ANSWER ✔ a. identified
b. evaluated
c. Controlled
21.True/False: In the PSM standard, OSHA states employees must be trained if
they work with highly hazardous chemicals - ANSWER ✔ True
22.True/False: Facilities are not permitted to control your entrance and exit in
covered process areas. - ANSWER ✔ False
23.If you are replacing a piece of equipment, the new one should be the same as
the one being removed. If it's not, you should find out whether the change
was on purpose....what is this called? - ANSWER ✔ Management of
Change
24.Which of the following should be your first concern from the moment you
enter the work site? - ANSWER ✔ Safety
25.True/False: Under the Stop Work Authority, you have the right and
obligation to stop a work activity if you have reason to believe your own
safety or a co-worker's safety is in jeopardy or if the work plan is not clearly
established or understood. - ANSWER ✔ True
GUIDE 2026/2027 ACCURATE QUESTIONS
WITH CORRECT DETAILED SOLUTIONS ||
100% GUARANTEED PASS
<NEWEST VERSION>
1. What is the most frequently cited OSHA violation? - ANSWER ✔ Fall
Protection
2. What key elements are essential to recognizing hazards and reducing or
eliminating workplace hazards? - ANSWER ✔ Management commitment
and employee involvement
3. You are encouraged to ask your coworkers/supervisor for information
whenever you have a problem or are in doubt about what to do on a job? -
ANSWER ✔ True
4. It is your responsibility to follow all safety regulations, inform your
employer of any unsafe condition; report all injuries no matter how minor
they seem and wear the proper personal protective equipment? - ANSWER
✔ True
5. The OSHA standard that addresses the requirements for preventing and
lessening the results of a bad release of toxic, reactive, flammable, or highly
explosive hazardous chemicals from a process - ANSWER ✔ Process
safety management Standard
6. The process Hazard Analysis (PHA) is one of the most important parts of the
PSM program. PHAs are used to identify and evaluate major processes and
ensure they are - ANSWER ✔ Evaluated, Controlled, and Identified
,7. In the PSM standard OSHA states employees must be trained if they work
with highly hazardous chemicals. - ANSWER ✔ True
8. Facilities are not permitted to control your entrance and exit in covered
process areas. - ANSWER ✔ False
9. What should be your first concern from the moment you enter the work site?
- ANSWER ✔ Safety
10.Under the Stop Work Authority, you have the right and obligation to stop a
work activity if you have reason to believe your own safety or a coworkers
safety is in jeopardy or if the work plan is not clearly established or
understood . - ANSWER ✔ True
11.What's needed in order to operate a plant-owned vehicle or mobile
equipment while at a facility - ANSWER ✔ qualified only authorized only
12.What type of work permits you may encounter on the job - ANSWER ✔
safe work permits confined space entry permits, hot work permits, line entry
or line breaking permits, lockout/tagout permits
13.What is the most frequently cited OSHA violation? - ANSWER ✔ Fall
protection
14.Key elements in recognizing hazards and reducing/eliminating workplace
hazards - ANSWER ✔ a. Management Leadership
b. Hazard Prevention and Control
c. Program Evaluation and Improvement
d. Worker Protection
e. Multi-employer Work sites
f. Hazard Identification and Assessment
g. Education and Training
15.You are encouraged to ask your______ for information whenever you have a
problem or are in doubt about what to do on a job - ANSWER ✔
supervisor
, 16.True/False: It is your responsibility to follow all safety regulations, inform
your employers of any unsafe condition; report all injuries (no matter how
minor); and wear the proper personal protective equipment - ANSWER ✔
True
17.PPE - ANSWER ✔ personal protective equipment
18.Process Safety Management standard - ANSWER ✔ OSHA standard that
addresses the requirements for preventing and lessening the results of a bad
release of toxic, reactive, flammable, or high explosive hazardous chemicals
from a process
19.The ____________ is one of the most important parts of the PSM program. -
ANSWER ✔ Process Hazard Analysis
20.PHAs are used to identify and evaluate major processes and ensure they are:
- ANSWER ✔ a. identified
b. evaluated
c. Controlled
21.True/False: In the PSM standard, OSHA states employees must be trained if
they work with highly hazardous chemicals - ANSWER ✔ True
22.True/False: Facilities are not permitted to control your entrance and exit in
covered process areas. - ANSWER ✔ False
23.If you are replacing a piece of equipment, the new one should be the same as
the one being removed. If it's not, you should find out whether the change
was on purpose....what is this called? - ANSWER ✔ Management of
Change
24.Which of the following should be your first concern from the moment you
enter the work site? - ANSWER ✔ Safety
25.True/False: Under the Stop Work Authority, you have the right and
obligation to stop a work activity if you have reason to believe your own
safety or a co-worker's safety is in jeopardy or if the work plan is not clearly
established or understood. - ANSWER ✔ True
