3A2 Practice Questions Exam Test 2026\2027.
What is the focus of the Engineers Regulations in a typical Boiler and Pressure Vessels Act?
Select one:
A. To state the minimum qualifications necessary to obtain each class of Power Engineer certification.
B. To control process operations
C. To decide who will be Chief Engineer
D. To regulate safe handling of fired equipment.
E. To limit the number of engineers.
A. To state the minimum qualifications necessary to obtain each class of Power Engineer certification.
Which of these is the "Boiler, Pressure Vessel and Pressure Piping Code" ?
Select one:
A. CSA B52.
B. ASME Section I.
C. ASME Section VII
D. CSA B51
E. NFPA.
D. CSA B51
What code contains Recommended Guidelines For The Care of Power Boilers?
Select one:
A. CSA B52.
B. ASME Section I.
C. CSA B51.
D. ASME Section VII.
E. NFPA 1001.
D. ASME Section VII.
What is the main focus of the National Board of Boiler and Pressure Vessel Inspectors (NBBI)?
Select one:
A. To supervise the power engineers and the safe, and efficient, operation of the plant.
B. To establish uniform qualifications for inspectors and acceptance of standard code requirements.
C. To regulate safe handling of fired equipment.
D. To state the minimum qualifications necessary to obtain each class of power engineer certification.
E. To regulate fire safety in the plant.
B. To establish uniform qualifications for inspectors and acceptance of standard code requirements.
The letters C.R.N. stand for:
Select one:
A. Cancelled Registration Number
B. Canadian Repair Number
C. Certified Repair Number
D. Canadian Registration Number
E. Centralized Registration Numbers
D. Canadian Registration Number
,3A2 Practice Questions Exam Test 2026\2027.
What information will be found in the "Boilers and Related Components" of the B-51 code?
Select one:
A. Information that must appear on the nameplates of every boiler, pressure vessel, safety valve, relief valve and
rupture disc.
B. Identifies pressure vessels and their installation, including pressure vessel inspection openings.
C. Identifies piping and fittings and lists the codes and standards that must be used.
D. Refrigeration equipment and refers to CSA B52 for the standard to be met in the design, construction,
installation, inspection, testing, and repair of refrigeration equipment.
E. Standards used in the design, construction, installation, inspection, testing, and repair of boilers.
E. Standards used in the design, construction, installation, inspection, testing, and repair of boilers.
What standard regulates Mechanical Refrigeration Code?
Select one:
A. CSA B52.
B. ASME Section I.
C. CSA B51.
D. ASME Section VII.
E. NFPA.
A. CSA B52.
What code contains Rules For Construction of Power Boilers?
Select one:
A. CSA B52.
B. ASME Section I.
C. CSA B51.
D. ASME Section VIII.
E. NFPA.
B. ASME Section I.
What determines the classification of the certificate of competency required for the role of chief power engineer?
Select one:
A. Product classification.
B. Number of employees.
C. Type of feedstock used.
D. Kilowatt rating of the power plant.
E. ASME regulations.
D. Kilowatt rating of the power plant.
What are the two main purposes of the CSA B-52 code?
1. Terms and equipment relating to refrigeration and air conditioning equipment are defined.
2. The various classifications of buildings and occupancies are listed and described with examples of each
classification given.
3. To provide for the safe design, construction, installation, operation and repair of refrigerating and air
conditioning equipment and systems, and related equipment.
,3A2 Practice Questions Exam Test 2026\2027.
4. To promote uniform requirements among the provinces and territories.
Select one:
A. 1, 2
B. 1, 3
C. 2, 4
D. 3, 4
E. 1, 4
D. 3, 4
What is the role of the chief power engineer?
Select one:
A. To inspect the operations.
B. To supervise other power engineers and the safe, and efficient, operation of the plant.
C. To conduct safety training.
D. To make coffee.
E. To operate the panel.
B. To supervise other power engineers and the safe, and efficient, operation of the plant.
What code regulates Process Piping?
Select one:
A. CSA B52.
B. ASME Section I.
C. CSA B51.
D. ASME Section VII.
E. ASME B31.3.
E. ASME B31.3.
What tables are found in the "Tables" section of the B-51 code?
1. Categories of fittings.
2. Minimum dimensions of blowoff vessels.
3. Minimum dimensions of blowoff vessels for coil-tube boilers.
4. Steam Tables.
5. Refrigeration Tables.
Select one:
A. 1, 2
B. 1, 3
C. 1, 2, 3
D. 3, 4, 5
E. 4, 5
C. 1, 2, 3
Clear definitions for terms and equipment relating to refrigeration and air conditioning equipment are defined in
the _____.
Select one:
, 3A2 Practice Questions Exam Test 2026\2027.
A. CSA-B51
B. CSA-B52
C. ASME Section I
D. ASME Section VII
E. NFPA 1001
B. CSA-B52
What is the acronym for The National Board of Boiler and Pressure Vessel Inspectors?
Select one:
A. CSA.
B. ASME.
C. NBA.
D. NBBI.
E. HSN.
D. NBBI.
3A2 01 04 Most, if not all Jurisdictions, require boilers and pressure vessels to be inspected during fabrication by
an inspector holding a:
Select one:
A. National Board commission.
B. Degree in Mechanical Engineering.
C. First Class Engineers Certificate.
D. Second Class Engineers Certificate.
E. Third Class Engineers Certificate.
A. National Board commission.
The "Pressure Vessels" section of the B-51 code identifies pressure vessels and their installation, including
pressure vessel inspection openings. This section also shows the design of cushion tanks, blow-off vessels, and
the installation of:
Select one:
A. Air receivers.
B. Boiler drums.
C. Dearators.
D. Blowdown tanks.
E. Fuel tanks.
A. Air receivers.
What are the two main purposes of the CSA B-52 code?
1. Terms and equipment relating to refrigeration and air conditioning equipment are defined.
2. The various classifications of buildings and occupancies are listed and described with examples of each
classification given.
3. To provide for the safe design, construction, installation, operation and repair of refrigerating and air
conditioning equipment and systems, and related equipment.
4. To promote uniform requirements among the provinces and territories.
What is the focus of the Engineers Regulations in a typical Boiler and Pressure Vessels Act?
Select one:
A. To state the minimum qualifications necessary to obtain each class of Power Engineer certification.
B. To control process operations
C. To decide who will be Chief Engineer
D. To regulate safe handling of fired equipment.
E. To limit the number of engineers.
A. To state the minimum qualifications necessary to obtain each class of Power Engineer certification.
Which of these is the "Boiler, Pressure Vessel and Pressure Piping Code" ?
Select one:
A. CSA B52.
B. ASME Section I.
C. ASME Section VII
D. CSA B51
E. NFPA.
D. CSA B51
What code contains Recommended Guidelines For The Care of Power Boilers?
Select one:
A. CSA B52.
B. ASME Section I.
C. CSA B51.
D. ASME Section VII.
E. NFPA 1001.
D. ASME Section VII.
What is the main focus of the National Board of Boiler and Pressure Vessel Inspectors (NBBI)?
Select one:
A. To supervise the power engineers and the safe, and efficient, operation of the plant.
B. To establish uniform qualifications for inspectors and acceptance of standard code requirements.
C. To regulate safe handling of fired equipment.
D. To state the minimum qualifications necessary to obtain each class of power engineer certification.
E. To regulate fire safety in the plant.
B. To establish uniform qualifications for inspectors and acceptance of standard code requirements.
The letters C.R.N. stand for:
Select one:
A. Cancelled Registration Number
B. Canadian Repair Number
C. Certified Repair Number
D. Canadian Registration Number
E. Centralized Registration Numbers
D. Canadian Registration Number
,3A2 Practice Questions Exam Test 2026\2027.
What information will be found in the "Boilers and Related Components" of the B-51 code?
Select one:
A. Information that must appear on the nameplates of every boiler, pressure vessel, safety valve, relief valve and
rupture disc.
B. Identifies pressure vessels and their installation, including pressure vessel inspection openings.
C. Identifies piping and fittings and lists the codes and standards that must be used.
D. Refrigeration equipment and refers to CSA B52 for the standard to be met in the design, construction,
installation, inspection, testing, and repair of refrigeration equipment.
E. Standards used in the design, construction, installation, inspection, testing, and repair of boilers.
E. Standards used in the design, construction, installation, inspection, testing, and repair of boilers.
What standard regulates Mechanical Refrigeration Code?
Select one:
A. CSA B52.
B. ASME Section I.
C. CSA B51.
D. ASME Section VII.
E. NFPA.
A. CSA B52.
What code contains Rules For Construction of Power Boilers?
Select one:
A. CSA B52.
B. ASME Section I.
C. CSA B51.
D. ASME Section VIII.
E. NFPA.
B. ASME Section I.
What determines the classification of the certificate of competency required for the role of chief power engineer?
Select one:
A. Product classification.
B. Number of employees.
C. Type of feedstock used.
D. Kilowatt rating of the power plant.
E. ASME regulations.
D. Kilowatt rating of the power plant.
What are the two main purposes of the CSA B-52 code?
1. Terms and equipment relating to refrigeration and air conditioning equipment are defined.
2. The various classifications of buildings and occupancies are listed and described with examples of each
classification given.
3. To provide for the safe design, construction, installation, operation and repair of refrigerating and air
conditioning equipment and systems, and related equipment.
,3A2 Practice Questions Exam Test 2026\2027.
4. To promote uniform requirements among the provinces and territories.
Select one:
A. 1, 2
B. 1, 3
C. 2, 4
D. 3, 4
E. 1, 4
D. 3, 4
What is the role of the chief power engineer?
Select one:
A. To inspect the operations.
B. To supervise other power engineers and the safe, and efficient, operation of the plant.
C. To conduct safety training.
D. To make coffee.
E. To operate the panel.
B. To supervise other power engineers and the safe, and efficient, operation of the plant.
What code regulates Process Piping?
Select one:
A. CSA B52.
B. ASME Section I.
C. CSA B51.
D. ASME Section VII.
E. ASME B31.3.
E. ASME B31.3.
What tables are found in the "Tables" section of the B-51 code?
1. Categories of fittings.
2. Minimum dimensions of blowoff vessels.
3. Minimum dimensions of blowoff vessels for coil-tube boilers.
4. Steam Tables.
5. Refrigeration Tables.
Select one:
A. 1, 2
B. 1, 3
C. 1, 2, 3
D. 3, 4, 5
E. 4, 5
C. 1, 2, 3
Clear definitions for terms and equipment relating to refrigeration and air conditioning equipment are defined in
the _____.
Select one:
, 3A2 Practice Questions Exam Test 2026\2027.
A. CSA-B51
B. CSA-B52
C. ASME Section I
D. ASME Section VII
E. NFPA 1001
B. CSA-B52
What is the acronym for The National Board of Boiler and Pressure Vessel Inspectors?
Select one:
A. CSA.
B. ASME.
C. NBA.
D. NBBI.
E. HSN.
D. NBBI.
3A2 01 04 Most, if not all Jurisdictions, require boilers and pressure vessels to be inspected during fabrication by
an inspector holding a:
Select one:
A. National Board commission.
B. Degree in Mechanical Engineering.
C. First Class Engineers Certificate.
D. Second Class Engineers Certificate.
E. Third Class Engineers Certificate.
A. National Board commission.
The "Pressure Vessels" section of the B-51 code identifies pressure vessels and their installation, including
pressure vessel inspection openings. This section also shows the design of cushion tanks, blow-off vessels, and
the installation of:
Select one:
A. Air receivers.
B. Boiler drums.
C. Dearators.
D. Blowdown tanks.
E. Fuel tanks.
A. Air receivers.
What are the two main purposes of the CSA B-52 code?
1. Terms and equipment relating to refrigeration and air conditioning equipment are defined.
2. The various classifications of buildings and occupancies are listed and described with examples of each
classification given.
3. To provide for the safe design, construction, installation, operation and repair of refrigerating and air
conditioning equipment and systems, and related equipment.
4. To promote uniform requirements among the provinces and territories.
