• ¿Documento equivocado? Cámbialo gratis
  • Escrito por estudiantes que aprobaron
  • Inmediatamente disponible después del pago
  • Leer en línea o como PDF
Vender
¿Dónde estudias?
Tu idioma
Document preview thumbnail
Vista previa 4 fuera de 33 páginas
Examen

Neiep Elevator Mechanic Certification Exam

Document preview thumbnail
Vista previa 4 fuera de 33 páginas

NEIEP ELEVATOR MECHANIC CERTIFICATION EXAM

Vista previa del contenido

1


NEIEP ELEVATOR MECHANIC CERTIFICATION EXAM PREP
FULL PACKAGE 2026-27 LATEST VERSION



Subject: Elevator Mechanics – Comprehensive Examination

Description: This comprehensive examination is designed to assess mastery of the
knowledge and skills required for the National Elevator Industry Educational Program
(NEIEP) Mechanic Certification Exam. The exam integrates theoretical concepts with
practical, real-world applications across all major elevator systems, including traction and
hydraulic equipment, electrical and electronic controls, safety codes (ASME A17.1/CSA B44),
rigging, and troubleshooting procedures. It reflects current industry standards and is
structured to challenge candidates at the journey-level mechanic competency, preparing
them for the capstone examination that leads to full-fledged International Union of Elevator
Constructors (IUEC) Mechanic status.



Section 1: Questions 1–50
1. Before performing maintenance on an elevator controller, what is
the FIRST safety step required?
A) Notify building management
B) Place warning signs at all landings
C) Lockout and tagout the main line disconnect
D) Test the stopping distance of the car
Explanation: Lockout/Tagout (LOTO) of the main line disconnect is the
first and most critical safety step before any maintenance on elevator
controllers. Per OSHA 1910.147 and NEIEP safety standards, LOTO
prevents unexpected startup and release of stored energy that could
cause injury or death.
2. What is the proper procedure for entering the hoistway from the
top of the car?
A) Jump from the landing into the car
B) Use the hoistway access switch after ensuring car is within 18

,2


inches of the landing
C) Climb down the hoistway rails
D) Ride the crosshead down from the top
Explanation: The hoistway access switch should be used only after
ensuring the car is within 18 inches of the landing. ASME A17.1
requires this proximity to prevent falls and ensure safe transfer
between landing and car top.
3. When working in the elevator pit, which personal protective
equipment (PPE) is ALWAYS required?
A) Hard hat and safety glasses only
B) Hard hat, safety glasses, and steel-toed boots
C) Safety glasses and gloves only
D) Hard hat only
Explanation: Working in elevator pits requires comprehensive PPE:
hard hat (overhead hazards), safety glasses (flying debris/chemicals),
and steel-toed boots (crushing hazards from falling objects or
equipment).
4. What is the minimum number of locks required for a group
lockout/tagout procedure involving multiple mechanics?
A) One lock for the group leader
B) One lock per mechanic
C) One lock per shift
D) Two locks total regardless of personnel
Explanation: Group LOTO requires each mechanic to apply their own
individual lock to the lockout device. This ensures each person has
individual control and protection—no one can remove another's lock.
5. In a gearless traction machine, the brake drum is mounted
directly on the:

,3


A) Worm gear shaft
B) Motor shaft
C) Counter shaft
D) Governor shaft
Explanation: In gearless machines, both the drive sheave and brake
drum are directly on the motor shaft. This design eliminates the need
for a gear reduction system and is used for high-speed applications.
6. What is the primary advantage of a gearless machine over a
geared machine?
A) Lower cost
B) Higher speed capability
C) Smaller footprint
D) Quieter operation at low speed
Explanation: Gearless machines are used for high-speed applications,
typically over 350 feet per minute (fpm). They are capable of speeds
up to 2000 fpm or more in modern installations.
7. The worm and gear in a geared machine is typically made of:
A) Steel and bronze
B) Cast iron and aluminum
C) Brass and steel
D) Plastic and steel
Explanation: A steel worm with a bronze gear provides wear
resistance and quiet operation. The bronze gear is softer than the
steel worm, allowing it to wear sacrificially and protect the more
expensive worm.
8. What type of bearing is most common in modern elevator
machines?
A) Plain babbit

, 4


B) Roller bearing
C) Needle bearing
D) Hydrodynamic
Explanation: Anti-friction roller bearings are most common in modern
elevator machines as they reduce maintenance and friction.
9. The main drive sheave grooves should be inspected for:
A) Rust only
B) Groove wear and unevenness
C) Paint condition
D) Color change
Explanation: Worn grooves reduce traction and cause rope slip.
Regular inspection of sheave grooves for wear and unevenness is
critical for maintaining proper traction and safe elevator operation.
10. What is the typical gear ratio range for geared traction
machines?
A) 5:1 to 15:1
B) 20:1 to 60:1
C) 80:1 to 120:1
D) 150:1 to 200:1
Explanation: Common ratios are 20:1 to 60:1 for passenger elevators.
The specific ratio is determined by the required speed and torque
characteristics of the installation.
11. The machine room floor must have a non-slip surface and be
capable of supporting:
A) 100 lb/sq ft
B) 150 lb/sq ft
C) 200 lb/sq ft
D) 250 lb/sq ft

Información del documento

Subido en
21 de agosto de 2026
Número de páginas
33
Escrito en
2026/2027
Tipo
Examen
Contiene
Preguntas y respuestas
$33.99

¿Documento equivocado? Cámbialo gratis Dentro de los 14 días posteriores a la compra y antes de descargarlo, puedes elegir otro documento. Puedes gastar el importe de nuevo.
Escrito por estudiantes que aprobaron
Inmediatamente disponible después del pago
Leer en línea o como PDF

Seller avatar
Los indicadores de reputación están sujetos a la cantidad de artículos vendidos por una tarifa y las reseñas que ha recibido por esos documentos. Hay tres niveles: Bronce, Plata y Oro. Cuanto mayor reputación, más podrás confiar en la calidad del trabajo del vendedor.
Vendido
68
Seguidores
13
Artículos
2940
Última venta
1 mes hace



Por qué los estudiantes eligen Stuvia

Creado por compañeros estudiantes, verificado por reseñas

Calidad en la que puedes confiar: escrito por estudiantes que aprobaron y evaluado por otros que han usado estos resúmenes.

¿No estás satisfecho? Elige otro documento

¡No te preocupes! Puedes elegir directamente otro documento que se ajuste mejor a lo que buscas.

Paga como quieras, empieza a estudiar al instante

Sin suscripción, sin compromisos. Paga como estés acostumbrado con tarjeta de crédito y descarga tu documento PDF inmediatamente.

Student with book image

“Comprado, descargado y aprobado. Así de fácil puede ser.”

Alisha Student

Preguntas frecuentes