• ¿Documento equivocado? Cámbialo gratis
  • Escrito por estudiantes que aprobaron
  • Inmediatamente disponible después del pago
  • Leer en línea o como PDF
Vender
¿Dónde estudias?
Tu idioma
Document preview thumbnail
Vista previa 4 fuera de 50 páginas
Examen

Basic And Advanced Rigging Practices Exam Full Package

Document preview thumbnail
Vista previa 4 fuera de 50 páginas

BASIC AND ADVANCED RIGGING PRACTICES EXAM FULL PACKAGE

Vista previa del contenido

1


BASIC AND ADVANCED RIGGING PRACTICES EXAM
FULL PACKAGE QUESTIONS ANSWERS AND
RATIONALES 2026-27 LATEST VERSION


Subject: Construction and Industrial Rigging
Course Code: RIGG-101

Description:
This comprehensive examination assesses mastery of safe rigging practices for construction,
industrial, and entertainment applications. Candidates will demonstrate knowledge of load
weight estimation, sling angle calculations, rigging hardware identification and inspection,
hitch configurations, and safe lifting procedures. The exam covers wire rope, synthetic, and
chain slings; shackles, hooks, and below-the-hook lifting devices; OSHA and ASME regulatory
requirements; hand and voice signal communication; and emergency procedures. Clinical
decision-making is emphasized through scenario-based questions requiring application of
rigging principles, hazard identification, and regulatory compliance. Questions reflect current
standards including ASME B30 series, OSHA 1910.184 and 1926.251, and NCCCO rigger
certification requirements.



SECTION 1: Questions 1–50
1. A load weighs 4,500 lbs and is being lifted by a single vertical sling.
What is the tension in the sling?
A) 2,250 lbs
B) 4,500 lbs
C) 9,000 lbs
D) 1,125 lbs
Rationale: In a single vertical lift, the tension equals the load weight.
There is no angle or multiple-leg sharing to affect the calculation.


2. What is the first step in any rigging operation?

,2


A) Select the appropriate sling
B) Determine the weight of the load
C) Inspect the crane
D) Clear the lift zone
Rationale: Determining the load weight is the essential first step
before selecting rigging equipment or planning the lift. All rigging
capacities depend on knowing the load weight.


3. What is the recommended action when lifting a load longer than
_______?
A) 8 feet
B) 10 feet
C) 12 feet
D) 15 feet
Rationale: The recommendation when lifting a load longer than 12
feet is to use two choker hitches to provide better load control and
stability.


4. A 1-inch, 3-leg bridle wire rope sling rigged at a 45-degree angle is
rated for 18 tons. If a fourth leg is added, the capacity will increase
by:
A) 4.5 tons
B) 6 tons
C) 0 lbs (no increase)
D) 2 tons

,3


Rationale: Adding a fourth leg to a bridle sling does not increase the
rated capacity. The capacity is determined by the angle of the legs
and the weakest leg.


5. According to OSHA regulations, a hook must be removed from
service when the throat opening exceeds what percentage of its
original opening?
A) 10%
B) 15%
C) 20%
D) 25%
Rationale: OSHA requires hook replacement if the throat opening
exceeds 15% of its original size. This deformation indicates
overloading or metal fatigue.


6. What provides additional control of a load being lifted?
A) Tag lines
B) Safety harnesses
C) Tag lines
D) Outriggers
Rationale: Tag lines are used to help control the load, preventing it
from swinging or rotating during the lift. They allow ground
personnel to maintain load stability.


7. When two cranes are lifting 100 tons and Crane A has 40% of the
load, how much weight will Crane B have on its hook?

, 4


A) 40,000 lbs
B) 80,000 lbs
C) 120,000 lbs
D) 160,000 lbs
Rationale: 100 tons = 200,000 lbs. Crane A has 40% (80,000 lbs), so
Crane B has 60% (120,000 lbs). The two cranes share the total load.


8. The process that attempts to identify hazards and devise plans to
overcome or eliminate them is called:
A) Risk assessment
B) Lift plan
C) Safety audit
D) Pre-lift inspection
Rationale: A lift plan is a methodical process that identifies potential
hazards and develops plans to overcome or eliminate them before the
lift begins.


9. What type of rope will stretch the furthest under a sustained load?
A) Nylon
B) Polyester
C) Polypropylene
D) #1 Manila
Rationale: #1 Manila natural fiber rope stretches the furthest under a
sustained load compared to synthetic alternatives.


10. How do you find the safe working load (SWL) for a single vertical
wire rope sling using the rule of thumb?

Información del documento

Subido en
21 de agosto de 2026
Número de páginas
50
Escrito en
2026/2027
Tipo
Examen
Contiene
Preguntas y respuestas
$30.99

¿Documento equivocado? Cámbialo gratis Dentro de los 14 días posteriores a la compra y antes de descargarlo, puedes elegir otro documento. Puedes gastar el importe de nuevo.
Escrito por estudiantes que aprobaron
Inmediatamente disponible después del pago
Leer en línea o como PDF

Seller avatar
Los indicadores de reputación están sujetos a la cantidad de artículos vendidos por una tarifa y las reseñas que ha recibido por esos documentos. Hay tres niveles: Bronce, Plata y Oro. Cuanto mayor reputación, más podrás confiar en la calidad del trabajo del vendedor.
Vendido
68
Seguidores
13
Artículos
2940
Última venta
1 mes hace



Por qué los estudiantes eligen Stuvia

Creado por compañeros estudiantes, verificado por reseñas

Calidad en la que puedes confiar: escrito por estudiantes que aprobaron y evaluado por otros que han usado estos resúmenes.

¿No estás satisfecho? Elige otro documento

¡No te preocupes! Puedes elegir directamente otro documento que se ajuste mejor a lo que buscas.

Paga como quieras, empieza a estudiar al instante

Sin suscripción, sin compromisos. Paga como estés acostumbrado con tarjeta de crédito y descarga tu documento PDF inmediatamente.

Student with book image

“Comprado, descargado y aprobado. Así de fácil puede ser.”

Alisha Student

Preguntas frecuentes