CCO Crane Inspector Certification Exam Overview
Study online at https://quizlet.com/_gkm4h5
1. Primary purpose of crane To ensure the crane is safe for operation.
inspection
2. ASME B30 standard for B30.9
overhead and gantry
cranes
3. Minimum frequency for Before each use.
daily crane inspection
4. Type of crane discussed Jib cranes.
in ASME B30.3
5. Component NOT includ- Paint color.
ed in a standard crane in-
spection checklist
6. Organization developing American Society of Mechanical Engineers.
ASME B30 standards
7. Primary focus of mo- Transportation and lifting.
bile cranes according to
ASME B30.5
8. Recommended action if a Replace or repair the component before further use.
crane component fails an
inspection
9. ASME B30 standard ad- B30.20.
dressing wire ropes used
in cranes
10. Essential documentation Inspection logs and maintenance records.
during crane inspections
, CCO Crane Inspector Certification Exam Overview
Study online at https://quizlet.com/_gkm4h5
11. Responsible party for Not provided in the extracted notes.
conducting crane inspec-
tions according to ASME
B30.10
12. Certified crane inspec- Individuals who are properly trained and certified to ensure accurate
tors and reliable assessments as per ASME B30.10.
13. Load testing A critical component of ASME B30 inspections to verify that the crane
can safely handle its rated load capacity without failure.
14. Safety devices on cranes Must be regularly inspected and maintained as per ASME B30 stan-
dards to ensure their proper functioning.
15. Maximum allowable an- It depends on the crane design and manufacturer's specifications.
gle for a crane's boom
16. ASME B30.2 standard Covers tower cranes, providing guidelines on their design, erection,
operation, inspection, and maintenance to ensure safety and efficien-
cy.
17. Comprehensive annual ASME B30 requires that cranes undergo a comprehensive inspection
crane inspection at least annually to ensure all components are in safe working condi-
tion.
18. ASME B30.4 Pertains to rail-mounted cranes, outlining standards for their safe
design, operation, inspection, and maintenance.
19. Discrepancies found dur- Must be documented and rectified immediately to maintain crane
ing a crane inspection safety and compliance with ASME B30.
20. ASME B30.26 Outlines safety requirements for slings, ensuring they are properly
selected, inspected, and maintained for safe crane operations.
, CCO Crane Inspector Certification Exam Overview
Study online at https://quizlet.com/_gkm4h5
21. Significant modifications Require a thorough re-inspection to ensure continued compliance
to a crane with ASME B30 standards.
22. ASME B30 inspections Inspections that must be carried out by certified individuals to ensure
the safety and reliability of crane operations.
23. Annual crane inspection Once a year, as required by ASME B30.
frequency
24. Purpose of load testing To assess the crane's lifting capacity and safety.
25. Safety device require- All safety devices on cranes must be regularly inspected and main-
ments tained.
26. Maximum boom angle Varies based on the specific crane design and manufacturer guide-
lines.
27. Tower cranes The primary focus of the ASME B30.2 standard.
28. Rail-mounted cranes The type of crane that ASME B30.4 pertains to.
29. Inspection discrepancies Must be documented and addressed before continued use of the
crane.
30. Safety requirements for Outlined in ASME B30.26.
slings
31. Crane modifications Significant modifications may affect safety and require re-inspection.
32. Inspection certification Certified crane inspectors are required to perform inspections.
33. Crane operation safety Ensured by regular inspection and maintenance of safety devices.
34. Crane lifting capacity as- Conducted during load testing as part of ASME B30 inspections.
sessment
Study online at https://quizlet.com/_gkm4h5
1. Primary purpose of crane To ensure the crane is safe for operation.
inspection
2. ASME B30 standard for B30.9
overhead and gantry
cranes
3. Minimum frequency for Before each use.
daily crane inspection
4. Type of crane discussed Jib cranes.
in ASME B30.3
5. Component NOT includ- Paint color.
ed in a standard crane in-
spection checklist
6. Organization developing American Society of Mechanical Engineers.
ASME B30 standards
7. Primary focus of mo- Transportation and lifting.
bile cranes according to
ASME B30.5
8. Recommended action if a Replace or repair the component before further use.
crane component fails an
inspection
9. ASME B30 standard ad- B30.20.
dressing wire ropes used
in cranes
10. Essential documentation Inspection logs and maintenance records.
during crane inspections
, CCO Crane Inspector Certification Exam Overview
Study online at https://quizlet.com/_gkm4h5
11. Responsible party for Not provided in the extracted notes.
conducting crane inspec-
tions according to ASME
B30.10
12. Certified crane inspec- Individuals who are properly trained and certified to ensure accurate
tors and reliable assessments as per ASME B30.10.
13. Load testing A critical component of ASME B30 inspections to verify that the crane
can safely handle its rated load capacity without failure.
14. Safety devices on cranes Must be regularly inspected and maintained as per ASME B30 stan-
dards to ensure their proper functioning.
15. Maximum allowable an- It depends on the crane design and manufacturer's specifications.
gle for a crane's boom
16. ASME B30.2 standard Covers tower cranes, providing guidelines on their design, erection,
operation, inspection, and maintenance to ensure safety and efficien-
cy.
17. Comprehensive annual ASME B30 requires that cranes undergo a comprehensive inspection
crane inspection at least annually to ensure all components are in safe working condi-
tion.
18. ASME B30.4 Pertains to rail-mounted cranes, outlining standards for their safe
design, operation, inspection, and maintenance.
19. Discrepancies found dur- Must be documented and rectified immediately to maintain crane
ing a crane inspection safety and compliance with ASME B30.
20. ASME B30.26 Outlines safety requirements for slings, ensuring they are properly
selected, inspected, and maintained for safe crane operations.
, CCO Crane Inspector Certification Exam Overview
Study online at https://quizlet.com/_gkm4h5
21. Significant modifications Require a thorough re-inspection to ensure continued compliance
to a crane with ASME B30 standards.
22. ASME B30 inspections Inspections that must be carried out by certified individuals to ensure
the safety and reliability of crane operations.
23. Annual crane inspection Once a year, as required by ASME B30.
frequency
24. Purpose of load testing To assess the crane's lifting capacity and safety.
25. Safety device require- All safety devices on cranes must be regularly inspected and main-
ments tained.
26. Maximum boom angle Varies based on the specific crane design and manufacturer guide-
lines.
27. Tower cranes The primary focus of the ASME B30.2 standard.
28. Rail-mounted cranes The type of crane that ASME B30.4 pertains to.
29. Inspection discrepancies Must be documented and addressed before continued use of the
crane.
30. Safety requirements for Outlined in ASME B30.26.
slings
31. Crane modifications Significant modifications may affect safety and require re-inspection.
32. Inspection certification Certified crane inspectors are required to perform inspections.
33. Crane operation safety Ensured by regular inspection and maintenance of safety devices.
34. Crane lifting capacity as- Conducted during load testing as part of ASME B30 inspections.
sessment
