VIVINT STUDY GUIDE EXAM 3 EXAM REVIEW
STUDY NOTES
◉ True or False: When installing the TAKE-345 you must always test
the new 12v Battery before using it.
Answer: True
◉ What is the output voltage of the transformer used to power the
Smart Hub?
Answer: 12 VDC
◉ What is the minimum distance for placement of a CO3 from the
corners on a wall?
Answer: 12 in
◉ True or False: The SMKT3 has only 2 functions: smoke and heat
detection.
Answer: False
◉ How would you program a CO3 if mounted on a hallway wall?
Answer: Loop 1, zone type 14
, ◉ True or False: When installing a translator, you must program all
of the existing sensors as new equipment on the panel.
Answer: false
◉ When programming a DW11 that has been installed on a window,
which zone/sensor type should you use?
Answer: 3
◉ True or False: The DW21 sensor should always be installed in the
door frame
Answer: True
◉ What equipment is used on all metal door frames
Answer: DW11
◉ Which zone/sensor types are used when programming an
SMKT3?
Answer: Type 9 smoke detection, type 8 freeze detection, type 9 heat
detection
◉ What is the correct height at which to install the PIR2?
Answer: 7.5 ft
STUDY NOTES
◉ True or False: When installing the TAKE-345 you must always test
the new 12v Battery before using it.
Answer: True
◉ What is the output voltage of the transformer used to power the
Smart Hub?
Answer: 12 VDC
◉ What is the minimum distance for placement of a CO3 from the
corners on a wall?
Answer: 12 in
◉ True or False: The SMKT3 has only 2 functions: smoke and heat
detection.
Answer: False
◉ How would you program a CO3 if mounted on a hallway wall?
Answer: Loop 1, zone type 14
, ◉ True or False: When installing a translator, you must program all
of the existing sensors as new equipment on the panel.
Answer: false
◉ When programming a DW11 that has been installed on a window,
which zone/sensor type should you use?
Answer: 3
◉ True or False: The DW21 sensor should always be installed in the
door frame
Answer: True
◉ What equipment is used on all metal door frames
Answer: DW11
◉ Which zone/sensor types are used when programming an
SMKT3?
Answer: Type 9 smoke detection, type 8 freeze detection, type 9 heat
detection
◉ What is the correct height at which to install the PIR2?
Answer: 7.5 ft
