Vivint Study Guide Exam 3 Certification Preparation Guide

VIVINT STUDY GUIDE EXAM 3 CERTIFICATION
PREPARATION GUIDE

◉ True or False: When performing a full system test, you may bypass
any open doors or windows.
Answer: False


◉ When programming an SKEY1, you must Always...?
Answer: Enable emergency key


◉ True or False: When running power to the TAKE-345, polarity
does not apply.
Answer: False


◉ When programming the emergency key for an SKEY1, which
zone/sensor types are recommended to use?
Answer: Auxiliary and audible alarm


◉ True or False: When installing an SMKT3, you must use the
included screws and anchors
Answer: True

, ◉ True or False: When installing the Fire Fighter, it is required to
test the customer's existing smoke detectors.
Answer: T


◉ When installing a DW21, where is the approved location for the
sensor?
Answer: Btw 6 & 2 in from the floor


◉ When installing a DW11 on a vinyl or metal frame, what should
you primarily use to mount the sensor?
Answer: Double sided tape


◉ Select all that apply: Which of the following materials can you use
to group multiple ground terminals in a Takeover module?
Answer: Wire caps or B connectors/Beans


◉ What sensor are you not allowed to program using a translator?
Answer: Smoke detector


◉ True or False: When installing the TAKE-345 you must always test
the new 12v Battery before using it.
Answer: True