Maryland Roadway Striping Supervisor
Certification Exam Practice Questions
And Correct Answers (Verified Answers)
Plus Rationale 2026 Q&A| Instant
Download Pdf
1. A Maryland Roadway Striping Supervisor is reviewing a newly
resurfaced arterial highway before pavement markings are installed.
What is the primary purpose of roadway striping on public highways?
A. To improve roadway aesthetics only
B. To provide guidance, warning, and regulatory information to road users
C. To reduce roadway construction costs
D. To eliminate the need for traffic signs
B. To provide guidance, warning, and regulatory information to road users
Roadway markings are traffic control devices that communicate lane
assignments, warnings, and regulatory information to motorists, cyclists,
and pedestrians, improving safety and traffic operations.
2. Which publication serves as the primary standard governing pavement
markings and traffic control devices in Maryland?
A. OSHA Construction Handbook
B. Maryland Plumbing Code
,C. Maryland Manual on Uniform Traffic Control Devices (MdMUTCD)
D. International Building Code
C. Maryland Manual on Uniform Traffic Control Devices (MdMUTCD)
The MdMUTCD establishes standards and guidance for traffic control
devices, including pavement markings, throughout Maryland.
3. When supervising a striping crew, what is the most important reason
for maintaining a safe work zone?
A. To reduce paint consumption
B. To improve equipment appearance
C. To protect workers and road users from hazards
D. To increase travel speeds through the work zone
C. To protect workers and road users from hazards
Work-zone safety is the foremost responsibility of supervisors because
roadway operations expose both workers and motorists to significant risks.
4. Which pavement marking color is generally used to separate traffic
moving in opposite directions?
A. Blue
B. Yellow
C. Green
D. Orange
B. Yellow
Yellow pavement markings indicate separation of opposing traffic flows
and are used for centerlines and no-passing zones.
5. Which pavement marking color is typically used to separate lanes
moving in the same direction?
,A. White
B. Purple
C. Yellow
D. Red
A. White
White markings separate traffic traveling in the same direction and are
commonly used for lane lines, edge lines, and channelization.
6. What is the primary purpose of retroreflective glass beads in
pavement markings?
A. Increase paint thickness
B. Reduce drying time
C. Improve nighttime visibility by reflecting headlights
D. Lower material costs
C. Improve nighttime visibility by reflecting headlights
Glass beads create retroreflectivity, returning vehicle headlight
illumination toward drivers and improving nighttime guidance.
7. Before applying pavement markings, a supervisor should ensure the
pavement surface is:
A. Wet and cool
B. Covered with dust for adhesion
C. Clean and properly prepared
D. Painted with primer regardless of conditions
C. Clean and properly prepared
Surface contaminants can interfere with adhesion and performance,
making proper cleaning essential before striping operations.
8. A solid white lane line generally indicates that drivers:
, A. May freely cross at any location
B. Should stay within their lane and crossing is discouraged
C. Must stop before crossing
D. Must turn left immediately
B. Should stay within their lane and crossing is discouraged
Solid white lines emphasize lane discipline and discourage lane changes
where safety concerns exist.
9. A broken white lane line indicates that:
A. Lane changes are generally permitted when safe
B. Passing is prohibited
C. Traffic moves in opposite directions
D. The roadway is closed
A. Lane changes are generally permitted when safe
Broken white lines allow lane changes when traffic conditions permit safe
movement between lanes.
10. Which marking is commonly used to indicate where vehicles
must stop at a signalized intersection?
A. Chevron marking
B. Edge line
C. Stop bar
D. Gore marking
C. Stop bar
A stop bar provides a clear visual location where vehicles must stop in
compliance with traffic controls.
11. The supervisor notices fresh pavement markings are being
tracked by vehicle tires. What is the most likely cause?
Certification Exam Practice Questions
And Correct Answers (Verified Answers)
Plus Rationale 2026 Q&A| Instant
Download Pdf
1. A Maryland Roadway Striping Supervisor is reviewing a newly
resurfaced arterial highway before pavement markings are installed.
What is the primary purpose of roadway striping on public highways?
A. To improve roadway aesthetics only
B. To provide guidance, warning, and regulatory information to road users
C. To reduce roadway construction costs
D. To eliminate the need for traffic signs
B. To provide guidance, warning, and regulatory information to road users
Roadway markings are traffic control devices that communicate lane
assignments, warnings, and regulatory information to motorists, cyclists,
and pedestrians, improving safety and traffic operations.
2. Which publication serves as the primary standard governing pavement
markings and traffic control devices in Maryland?
A. OSHA Construction Handbook
B. Maryland Plumbing Code
,C. Maryland Manual on Uniform Traffic Control Devices (MdMUTCD)
D. International Building Code
C. Maryland Manual on Uniform Traffic Control Devices (MdMUTCD)
The MdMUTCD establishes standards and guidance for traffic control
devices, including pavement markings, throughout Maryland.
3. When supervising a striping crew, what is the most important reason
for maintaining a safe work zone?
A. To reduce paint consumption
B. To improve equipment appearance
C. To protect workers and road users from hazards
D. To increase travel speeds through the work zone
C. To protect workers and road users from hazards
Work-zone safety is the foremost responsibility of supervisors because
roadway operations expose both workers and motorists to significant risks.
4. Which pavement marking color is generally used to separate traffic
moving in opposite directions?
A. Blue
B. Yellow
C. Green
D. Orange
B. Yellow
Yellow pavement markings indicate separation of opposing traffic flows
and are used for centerlines and no-passing zones.
5. Which pavement marking color is typically used to separate lanes
moving in the same direction?
,A. White
B. Purple
C. Yellow
D. Red
A. White
White markings separate traffic traveling in the same direction and are
commonly used for lane lines, edge lines, and channelization.
6. What is the primary purpose of retroreflective glass beads in
pavement markings?
A. Increase paint thickness
B. Reduce drying time
C. Improve nighttime visibility by reflecting headlights
D. Lower material costs
C. Improve nighttime visibility by reflecting headlights
Glass beads create retroreflectivity, returning vehicle headlight
illumination toward drivers and improving nighttime guidance.
7. Before applying pavement markings, a supervisor should ensure the
pavement surface is:
A. Wet and cool
B. Covered with dust for adhesion
C. Clean and properly prepared
D. Painted with primer regardless of conditions
C. Clean and properly prepared
Surface contaminants can interfere with adhesion and performance,
making proper cleaning essential before striping operations.
8. A solid white lane line generally indicates that drivers:
, A. May freely cross at any location
B. Should stay within their lane and crossing is discouraged
C. Must stop before crossing
D. Must turn left immediately
B. Should stay within their lane and crossing is discouraged
Solid white lines emphasize lane discipline and discourage lane changes
where safety concerns exist.
9. A broken white lane line indicates that:
A. Lane changes are generally permitted when safe
B. Passing is prohibited
C. Traffic moves in opposite directions
D. The roadway is closed
A. Lane changes are generally permitted when safe
Broken white lines allow lane changes when traffic conditions permit safe
movement between lanes.
10. Which marking is commonly used to indicate where vehicles
must stop at a signalized intersection?
A. Chevron marking
B. Edge line
C. Stop bar
D. Gore marking
C. Stop bar
A stop bar provides a clear visual location where vehicles must stop in
compliance with traffic controls.
11. The supervisor notices fresh pavement markings are being
tracked by vehicle tires. What is the most likely cause?
