PUMP OPERATOR FINAL PAPER 2026
QUESTIONS WITH SOLUTIONS GRADED A+
◉Dry Hydrant. Answer: Permanently installed pipe that has pump
suction connections installed at a static water source to speed
drafting operations.
◉The driver/operator notifies their immediate supervisor of the
defect and documentation regarding issues with apparatus. Engine
supervisor. Answer:
◉The incoming driver/operator should consult the person being
relieved for any pertinent information regarding incident activity,
equipment usage, or problems.. Answer:
◉(P115) When backing an apparatus. Answer: Sound 2 short blasts
of the vehicle horn immediately before backing the apparatus.
◉(P115) Backing straight. Answer: Palms face the spotter using
both arms
,◉(P115) Backing right. Answer: right arm out to the side with palm
of left hand facing driver
◉(P115) Backing left. Answer: left arm out to side with palm of right
hand facing driver
◉(P115) Stop. Answer: Arms form an X
◉(P115) Pull forward. Answer: Palms face driver (similar to backing
straight)
◉Mixing foam. Answer: batch mixing is simple but potentially
inaccurate
◉Induction uses a Venturi device called an eductor. Answer:
◉Storing foam. Answer: Pails, barrels, totes, and apparatus tanks,
(smallest to largest)
◉Load shedding. Answer: When load monitor shuts down less
important electrical equipment to prevent overload
◉90db and higher require appropriate hearing protection. Answer:
, ◉Steering wheel play should not be more than 10 degrees.. Answer:
◉Air pressure below 80psi will prevent air horns form operating.
Answer:
◉NFPA 1901 brake test requires that new apparatus come to a
complete stop (20mph in 35' or less). Answer:
◉The SAE number indicates the oil viscosity. Answer:
◉SAE-. Answer: Society of Automotive Engineers
◉Water Supply Pumper. Answer: Pumper with largest pump located
at the water source
◉3 components of water shuttle. Answer: Fill site, shuttle route, and
dump site
◉Dead-end hydrant. Answer: Hydrant that receives water from one
direction
QUESTIONS WITH SOLUTIONS GRADED A+
◉Dry Hydrant. Answer: Permanently installed pipe that has pump
suction connections installed at a static water source to speed
drafting operations.
◉The driver/operator notifies their immediate supervisor of the
defect and documentation regarding issues with apparatus. Engine
supervisor. Answer:
◉The incoming driver/operator should consult the person being
relieved for any pertinent information regarding incident activity,
equipment usage, or problems.. Answer:
◉(P115) When backing an apparatus. Answer: Sound 2 short blasts
of the vehicle horn immediately before backing the apparatus.
◉(P115) Backing straight. Answer: Palms face the spotter using
both arms
,◉(P115) Backing right. Answer: right arm out to the side with palm
of left hand facing driver
◉(P115) Backing left. Answer: left arm out to side with palm of right
hand facing driver
◉(P115) Stop. Answer: Arms form an X
◉(P115) Pull forward. Answer: Palms face driver (similar to backing
straight)
◉Mixing foam. Answer: batch mixing is simple but potentially
inaccurate
◉Induction uses a Venturi device called an eductor. Answer:
◉Storing foam. Answer: Pails, barrels, totes, and apparatus tanks,
(smallest to largest)
◉Load shedding. Answer: When load monitor shuts down less
important electrical equipment to prevent overload
◉90db and higher require appropriate hearing protection. Answer:
, ◉Steering wheel play should not be more than 10 degrees.. Answer:
◉Air pressure below 80psi will prevent air horns form operating.
Answer:
◉NFPA 1901 brake test requires that new apparatus come to a
complete stop (20mph in 35' or less). Answer:
◉The SAE number indicates the oil viscosity. Answer:
◉SAE-. Answer: Society of Automotive Engineers
◉Water Supply Pumper. Answer: Pumper with largest pump located
at the water source
◉3 components of water shuttle. Answer: Fill site, shuttle route, and
dump site
◉Dead-end hydrant. Answer: Hydrant that receives water from one
direction
