DANTE CERTIFICATION LEVEL 1 EXAM
REVIEW QUESTIONS WITH CORRECT
ANSWERS
◉ The Sample rate of an audio system dictates. Answer: the
highest audio frequency that the system can handle
◉ What is LAN. Answer: a computer network that
interconnects computers using a common range of IP Adresses
◉ what sample rates are supported by dante. Answer:
33.1kHz up to 192kHz
◉ Steps to deleting a subscription. Answer: 1. Open both
transmitter and reciever to expose channels
2. click green checkmark at intersection of channels you wish
to unsubscribe
3. wait for green checkmark to disappear
◉ do dante devices require special IP configurations. Answer:
No, all commonly supported IP address methods are
supported
, ◉ how are devices added to a dante network. Answer: devices
are automatically discovered and displayed in the Controller
◉ in the dante controller routing tab, a green checkmark
indicates. Answer: subscription successful
◉ as sample rate is increased on a device, what other property
is usually changed. Answer: channel count is reduced
◉ the easiest way to get ip addresses for a functional stand
alone dante netowrk is for all devices to. Answer: use the
"obtain an IP address automatically" setting
◉ can dante use fiber instead of copper cables for ethernet?.
Answer: yes
◉ are dante audio streams supported over wifi networks.
Answer: no
◉ how are devices restored to a dane network after a power
cycle. Answer: devices and connections are automatically
restored
REVIEW QUESTIONS WITH CORRECT
ANSWERS
◉ The Sample rate of an audio system dictates. Answer: the
highest audio frequency that the system can handle
◉ What is LAN. Answer: a computer network that
interconnects computers using a common range of IP Adresses
◉ what sample rates are supported by dante. Answer:
33.1kHz up to 192kHz
◉ Steps to deleting a subscription. Answer: 1. Open both
transmitter and reciever to expose channels
2. click green checkmark at intersection of channels you wish
to unsubscribe
3. wait for green checkmark to disappear
◉ do dante devices require special IP configurations. Answer:
No, all commonly supported IP address methods are
supported
, ◉ how are devices added to a dante network. Answer: devices
are automatically discovered and displayed in the Controller
◉ in the dante controller routing tab, a green checkmark
indicates. Answer: subscription successful
◉ as sample rate is increased on a device, what other property
is usually changed. Answer: channel count is reduced
◉ the easiest way to get ip addresses for a functional stand
alone dante netowrk is for all devices to. Answer: use the
"obtain an IP address automatically" setting
◉ can dante use fiber instead of copper cables for ethernet?.
Answer: yes
◉ are dante audio streams supported over wifi networks.
Answer: no
◉ how are devices restored to a dane network after a power
cycle. Answer: devices and connections are automatically
restored
