DANTE CERTIFICATION LEVEL 2 2ND EDITION
UPDATED ACTUAL EXAM QUESTIONS AND
CORRECT ANSWERS
◉ What does Dante redundancy do? Answer: Feature that
allows glitch-free flow of audio through a Secondary network
when the Primary network fails for any reason
◉ Can the Secondary (redundant) port on a Dante device be
connected to the Primary network to increase channel count?
Answer: No. This will cause the network to fail.
◉ How does one setup Dante redundancy? Answer: Connect a
second set of cables and switches to create a network that uses
only the Secondary port of Dante devices
◉ Can the Secondary (redundant) port be configured to daisy
chain devices? Answer: Yes, but only on certain Dante
devices. Always check.
◉ When would you select the "Enable Sync to External" box
for devices on the DC Clock Status tab? Answer: When a
device is either a) connected to an external word clock, or b)
, when using the internal clock of a device to drive a Dante
option card
◉ Dante [ ... ] use unicast as the default mode of transmission.
Answer: does
◉ A unicast network connection is: Answer: - Communication
that is only between specific devices on a network
- Default Dante behavior
◉ A multicast network connection is: Answer: - One to many
- Useful for solving "Fan out" conditions
◉ A broadcast network connection is: Answer: - One to
everyone
- Not used by Dante for audio
- A common type of network traffic
◉ A unicast Dante Flow can contain up to [ ... ] different Tx
channels of audio from the same device. Answer: 4
◉ How does Dante Controller inform you that multicast is
recommended? Answer: With a "Fan out' warning.
UPDATED ACTUAL EXAM QUESTIONS AND
CORRECT ANSWERS
◉ What does Dante redundancy do? Answer: Feature that
allows glitch-free flow of audio through a Secondary network
when the Primary network fails for any reason
◉ Can the Secondary (redundant) port on a Dante device be
connected to the Primary network to increase channel count?
Answer: No. This will cause the network to fail.
◉ How does one setup Dante redundancy? Answer: Connect a
second set of cables and switches to create a network that uses
only the Secondary port of Dante devices
◉ Can the Secondary (redundant) port be configured to daisy
chain devices? Answer: Yes, but only on certain Dante
devices. Always check.
◉ When would you select the "Enable Sync to External" box
for devices on the DC Clock Status tab? Answer: When a
device is either a) connected to an external word clock, or b)
, when using the internal clock of a device to drive a Dante
option card
◉ Dante [ ... ] use unicast as the default mode of transmission.
Answer: does
◉ A unicast network connection is: Answer: - Communication
that is only between specific devices on a network
- Default Dante behavior
◉ A multicast network connection is: Answer: - One to many
- Useful for solving "Fan out" conditions
◉ A broadcast network connection is: Answer: - One to
everyone
- Not used by Dante for audio
- A common type of network traffic
◉ A unicast Dante Flow can contain up to [ ... ] different Tx
channels of audio from the same device. Answer: 4
◉ How does Dante Controller inform you that multicast is
recommended? Answer: With a "Fan out' warning.
