Maryland Demolition Contractor
License Exam Practice Questions And
Correct Answers (Verified Answers) Plus
Rationale 2026 Q&A| Instant Download
Pdf
1. Which of the following best describes the primary purpose of
obtaining a demolition contractor license in Maryland?
A. To authorize contractors to perform architectural design services
B. To ensure contractors meet legal, safety, and operational standards for
demolition work
C. To permit contractors to manufacture explosives
D. To exempt contractors from local permitting requirements
B. To ensure contractors meet legal, safety, and operational standards for
demolition work
Rationale: Maryland demolition contractor licensing exists to protect public
safety by ensuring contractors possess the knowledge, qualifications,
insurance, and compliance capability necessary to conduct demolition
operations safely and legally.
2. Before beginning a demolition project, a contractor should first:
A. Remove all structural supports
B. Notify nearby residents only after demolition begins
,C. Conduct a comprehensive site assessment and engineering evaluation
D. Disconnect utilities after debris removal
C. Conduct a comprehensive site assessment and engineering evaluation
Rationale: A detailed site assessment identifies structural hazards, utility
locations, environmental concerns, and required safety measures before
demolition activities begin.
3. Which OSHA regulation primarily governs demolition operations?
A. 29 CFR 1926 Subpart T
B. 29 CFR 1910 Subpart D
C. 29 CFR 1926 Subpart M
D. 29 CFR 1926 Subpart P
A. 29 CFR 1926 Subpart T
Rationale: OSHA 29 CFR 1926 Subpart T specifically addresses demolition
standards, including engineering surveys, debris removal, and worker
protection requirements.
4. A demolition contractor must verify that utilities have been
disconnected prior to demolition because:
A. Utility companies require payment before service termination
B. Active utilities create severe fire, explosion, flooding, and electrocution
hazards
C. Utility disconnection improves demolition speed only
D. Utility lines are always removed automatically during demolition
B. Active utilities create severe fire, explosion, flooding, and electrocution
hazards
,Rationale: Live electrical, gas, water, and communication lines pose major
safety risks that can result in fatalities, fires, or explosions during
demolition operations.
5. Which document outlines specific hazards and required safety
procedures for demolition workers?
A. Property deed
B. Safety Data Sheet only
C. Site-specific safety and health plan
D. Contractor tax return
C. Site-specific safety and health plan
Rationale: A site-specific safety and health plan identifies job hazards,
emergency procedures, PPE requirements, and worker responsibilities for
safe demolition operations.
6. Selective demolition refers to:
A. Demolishing only concrete structures
B. Removing designated portions of a structure while preserving remaining
areas
C. Demolishing structures without permits
D. Using explosives for every demolition project
B. Removing designated portions of a structure while preserving remaining
areas
Rationale: Selective demolition involves carefully removing targeted
components while protecting surrounding structures and systems from
damage.
7. What is the primary purpose of an engineering survey before
demolition?
, A. To determine property tax value
B. To identify structural conditions and collapse hazards
C. To estimate landscaping costs
D. To evaluate neighborhood demographics
B. To identify structural conditions and collapse hazards
Rationale: Engineering surveys help determine structural stability,
hazardous conditions, and the safest demolition methods for the project.
8. Which hazard is most commonly associated with older buildings
scheduled for demolition?
A. Excessive oxygen levels
B. Radioactive contamination in all structures
C. Asbestos-containing materials
D. Frozen plumbing systems only
C. Asbestos-containing materials
Rationale: Older structures frequently contain asbestos insulation, flooring,
roofing, and fireproofing materials that require regulated handling and
abatement.
9. Fall protection is generally required in construction demolition work
when employees are exposed to falls of:
A. 2 feet or more
B. 4 feet or more
C. 6 feet or more
D. 12 feet or more
C. 6 feet or more
Rationale: OSHA construction standards typically require fall protection
when workers are exposed to falls of six feet or greater.
License Exam Practice Questions And
Correct Answers (Verified Answers) Plus
Rationale 2026 Q&A| Instant Download
1. Which of the following best describes the primary purpose of
obtaining a demolition contractor license in Maryland?
A. To authorize contractors to perform architectural design services
B. To ensure contractors meet legal, safety, and operational standards for
demolition work
C. To permit contractors to manufacture explosives
D. To exempt contractors from local permitting requirements
B. To ensure contractors meet legal, safety, and operational standards for
demolition work
Rationale: Maryland demolition contractor licensing exists to protect public
safety by ensuring contractors possess the knowledge, qualifications,
insurance, and compliance capability necessary to conduct demolition
operations safely and legally.
2. Before beginning a demolition project, a contractor should first:
A. Remove all structural supports
B. Notify nearby residents only after demolition begins
,C. Conduct a comprehensive site assessment and engineering evaluation
D. Disconnect utilities after debris removal
C. Conduct a comprehensive site assessment and engineering evaluation
Rationale: A detailed site assessment identifies structural hazards, utility
locations, environmental concerns, and required safety measures before
demolition activities begin.
3. Which OSHA regulation primarily governs demolition operations?
A. 29 CFR 1926 Subpart T
B. 29 CFR 1910 Subpart D
C. 29 CFR 1926 Subpart M
D. 29 CFR 1926 Subpart P
A. 29 CFR 1926 Subpart T
Rationale: OSHA 29 CFR 1926 Subpart T specifically addresses demolition
standards, including engineering surveys, debris removal, and worker
protection requirements.
4. A demolition contractor must verify that utilities have been
disconnected prior to demolition because:
A. Utility companies require payment before service termination
B. Active utilities create severe fire, explosion, flooding, and electrocution
hazards
C. Utility disconnection improves demolition speed only
D. Utility lines are always removed automatically during demolition
B. Active utilities create severe fire, explosion, flooding, and electrocution
hazards
,Rationale: Live electrical, gas, water, and communication lines pose major
safety risks that can result in fatalities, fires, or explosions during
demolition operations.
5. Which document outlines specific hazards and required safety
procedures for demolition workers?
A. Property deed
B. Safety Data Sheet only
C. Site-specific safety and health plan
D. Contractor tax return
C. Site-specific safety and health plan
Rationale: A site-specific safety and health plan identifies job hazards,
emergency procedures, PPE requirements, and worker responsibilities for
safe demolition operations.
6. Selective demolition refers to:
A. Demolishing only concrete structures
B. Removing designated portions of a structure while preserving remaining
areas
C. Demolishing structures without permits
D. Using explosives for every demolition project
B. Removing designated portions of a structure while preserving remaining
areas
Rationale: Selective demolition involves carefully removing targeted
components while protecting surrounding structures and systems from
damage.
7. What is the primary purpose of an engineering survey before
demolition?
, A. To determine property tax value
B. To identify structural conditions and collapse hazards
C. To estimate landscaping costs
D. To evaluate neighborhood demographics
B. To identify structural conditions and collapse hazards
Rationale: Engineering surveys help determine structural stability,
hazardous conditions, and the safest demolition methods for the project.
8. Which hazard is most commonly associated with older buildings
scheduled for demolition?
A. Excessive oxygen levels
B. Radioactive contamination in all structures
C. Asbestos-containing materials
D. Frozen plumbing systems only
C. Asbestos-containing materials
Rationale: Older structures frequently contain asbestos insulation, flooring,
roofing, and fireproofing materials that require regulated handling and
abatement.
9. Fall protection is generally required in construction demolition work
when employees are exposed to falls of:
A. 2 feet or more
B. 4 feet or more
C. 6 feet or more
D. 12 feet or more
C. 6 feet or more
Rationale: OSHA construction standards typically require fall protection
when workers are exposed to falls of six feet or greater.
