Const 120 1 || 100% no Error.
A building lot for a single-family dwelling is 25' wide and 190' deep. What is the area of the lot
in square feet? correct answers 4750
The best technique to "square" the building lines on a project layout would be to: correct answers
Measure diagonally, corner to corner
A builder's level may be used for all but one of the following activities: correct answers
Determine "plumb" on a wall
The term "plumb" refers to a ________ position. correct answers Vertical
A footing keyway is used to: correct answers Attach the footing to the foundation
In slab-on-grade construction, the concrete floor rests: correct answers On a bed of gravel that
has been placed on the ground
How many cubic yards of earth would be removed when excavating a hole 28' X 36' X 6' deep?
correct answers 224
#4 rebar is 1/2" in diameter. correct answers True
"Frost-line" refers to the depth which frost may penetrate in the ground during winter conditions.
correct answers True
In some jurisdictions, building permits may be required for remodels or renovations. correct
answers True
, A plumb line will always be at a 90 degree angle to a level surface. correct answers True
A plan view of kitchen cabinets would typically be shown on the __________. correct answers
Floor plan
A plan view of the footing location would typically be shown on the ________. correct answers
Foundation plan
An arrow designating North, and the location and bearing of property lines would typically be
shown on the ________. correct answers Site plan
A drawing showing a vertical cut through the building is called ________. correct answers A
section
Written documents which are the legal part of the construction documents are ________. correct
answers The specifications
The most accurate way to determine a dimension that is not written on a set of plans is to
________. correct answers Calculate it
The location of a building on the lot is determined from the ________. correct answers Site plan
The identifying labels and locations of rooms (dining, bath, etc.) are typically found on the
________. correct answers Floor plan
The corner-to-corner, diagonal measurement of a rectangle whose measurements are 30'-0" x 40'-
0" is ________. correct answers 50'-0"
Blueprinting is a process of making copies of construction documents where the end result is
________. correct answers White lines on a blue background
A building lot for a single-family dwelling is 25' wide and 190' deep. What is the area of the lot
in square feet? correct answers 4750
The best technique to "square" the building lines on a project layout would be to: correct answers
Measure diagonally, corner to corner
A builder's level may be used for all but one of the following activities: correct answers
Determine "plumb" on a wall
The term "plumb" refers to a ________ position. correct answers Vertical
A footing keyway is used to: correct answers Attach the footing to the foundation
In slab-on-grade construction, the concrete floor rests: correct answers On a bed of gravel that
has been placed on the ground
How many cubic yards of earth would be removed when excavating a hole 28' X 36' X 6' deep?
correct answers 224
#4 rebar is 1/2" in diameter. correct answers True
"Frost-line" refers to the depth which frost may penetrate in the ground during winter conditions.
correct answers True
In some jurisdictions, building permits may be required for remodels or renovations. correct
answers True
, A plumb line will always be at a 90 degree angle to a level surface. correct answers True
A plan view of kitchen cabinets would typically be shown on the __________. correct answers
Floor plan
A plan view of the footing location would typically be shown on the ________. correct answers
Foundation plan
An arrow designating North, and the location and bearing of property lines would typically be
shown on the ________. correct answers Site plan
A drawing showing a vertical cut through the building is called ________. correct answers A
section
Written documents which are the legal part of the construction documents are ________. correct
answers The specifications
The most accurate way to determine a dimension that is not written on a set of plans is to
________. correct answers Calculate it
The location of a building on the lot is determined from the ________. correct answers Site plan
The identifying labels and locations of rooms (dining, bath, etc.) are typically found on the
________. correct answers Floor plan
The corner-to-corner, diagonal measurement of a rectangle whose measurements are 30'-0" x 40'-
0" is ________. correct answers 50'-0"
Blueprinting is a process of making copies of construction documents where the end result is
________. correct answers White lines on a blue background
