1|Page
NYC NYCHA MAINTENANCE WORKER Exam 2026-
2027 BANK QUESTIONS WITH DETAILED VERIFIED
ANSWERS EXAM QUESTIONS WILL COME FROM
HERE (100% Latest Already Graded A+
1. What is the first thing a maintenance worker should do before
starting any repair job?
A. Gather all necessary tools
B. Notify the supervisor
C. Assess the work area for safety hazards
D. Begin the repair immediately
Correct Answer: C. Assess the work area for safety hazards
Rationale: Before beginning any repair work, assessing the area for
safety hazards is critical to prevent accidents and injuries. This includes
checking for electrical hazards, structural instability, chemical
exposures, and ensuring proper ventilation. Safety always comes first in
maintenance operations.
2. Which personal protective equipment (PPE) is most important when
working with electrical circuits?
,2|Page
A. Steel-toed boots
B. Rubber-insulated gloves
C. Hard hat
D. Safety goggles
Correct Answer: B. Rubber-insulated gloves
Rationale: Rubber-insulated gloves provide protection against electrical
shock when working with live or potentially live electrical circuits. They
are specifically designed to insulate the worker from electrical current
and are essential for any electrical work.
3. What does the term "lockout/tagout" refer to in maintenance
safety?
A. Securing tools in a locked toolbox after work is complete
B. Locking apartment doors to prevent unauthorized access
C. De-energizing equipment and locking it to prevent accidental startup
D. Locking chemical storage areas
Correct Answer: C. De-energizing equipment and locking it to prevent
accidental startup
Rationale: Lockout/tagout is a critical safety procedure used to ensure
that dangerous machines are properly shut off and cannot be started up
again before maintenance or servicing work is completed. It involves
physically locking the energy-isolating device and attaching a warning
tag.
,3|Page
4. When using a fire extinguisher, what does the PASS acronym stand
for?
A. Pull, Aim, Squeeze, Sweep
B. Push, Adjust, Spray, Stop
C. Prepare, Activate, Shoot, Secure
D. Point, Apply, Squeeze, Spread
Correct Answer: A. Pull, Aim, Squeeze, Sweep
Rationale: PASS is the standard memory aid for operating a portable
fire extinguisher. Pull the pin, Aim the nozzle at the base of the fire,
Squeeze the handle, and Sweep from side to side. This technique
ensures effective application of the extinguishing agent.
5. What is the maximum allowable safe lifting weight for one person
without mechanical assistance according to general OSHA guidelines?
A. 25 pounds
B. 50 pounds
C. 75 pounds
D. 100 pounds
Correct Answer: B. 50 pounds
Rationale: While there is no strict OSHA regulation setting a single
weight limit, 50 pounds is generally considered the threshold for safe
manual lifting by one person without mechanical assistance. Weights
above this require team lifting, mechanical aids, or ergonomic
assessment to prevent musculoskeletal injuries.
, 4|Page
6. Which type of fire extinguisher should be used on an electrical fire?
A. Class A
B. Class B
C. Class C
D. Class D
Correct Answer: C. Class C
Rationale: Class C fire extinguishers are specifically rated for fires
involving energized electrical equipment. They contain non-conductive
extinguishing agents such as carbon dioxide or dry chemical powder to
prevent electrical shock to the user.
7. What is the proper procedure for handling a chemical spill in a public
area?
A. Immediately clean it up with paper towels
B. Evacuate the area, contain the spill if safe, and notify the supervisor
C. Ignore it if it is a small amount
D. Use a mop and water to dilute the chemical
Correct Answer: B. Evacuate the area, contain the spill if safe, and notify
the supervisor
Rationale: Chemical spills require immediate action to protect
occupants and workers. Evacuation prevents exposure, containment
limits spread, and notifying a supervisor ensures proper cleanup with
appropriate materials and procedures.
NYC NYCHA MAINTENANCE WORKER Exam 2026-
2027 BANK QUESTIONS WITH DETAILED VERIFIED
ANSWERS EXAM QUESTIONS WILL COME FROM
HERE (100% Latest Already Graded A+
1. What is the first thing a maintenance worker should do before
starting any repair job?
A. Gather all necessary tools
B. Notify the supervisor
C. Assess the work area for safety hazards
D. Begin the repair immediately
Correct Answer: C. Assess the work area for safety hazards
Rationale: Before beginning any repair work, assessing the area for
safety hazards is critical to prevent accidents and injuries. This includes
checking for electrical hazards, structural instability, chemical
exposures, and ensuring proper ventilation. Safety always comes first in
maintenance operations.
2. Which personal protective equipment (PPE) is most important when
working with electrical circuits?
,2|Page
A. Steel-toed boots
B. Rubber-insulated gloves
C. Hard hat
D. Safety goggles
Correct Answer: B. Rubber-insulated gloves
Rationale: Rubber-insulated gloves provide protection against electrical
shock when working with live or potentially live electrical circuits. They
are specifically designed to insulate the worker from electrical current
and are essential for any electrical work.
3. What does the term "lockout/tagout" refer to in maintenance
safety?
A. Securing tools in a locked toolbox after work is complete
B. Locking apartment doors to prevent unauthorized access
C. De-energizing equipment and locking it to prevent accidental startup
D. Locking chemical storage areas
Correct Answer: C. De-energizing equipment and locking it to prevent
accidental startup
Rationale: Lockout/tagout is a critical safety procedure used to ensure
that dangerous machines are properly shut off and cannot be started up
again before maintenance or servicing work is completed. It involves
physically locking the energy-isolating device and attaching a warning
tag.
,3|Page
4. When using a fire extinguisher, what does the PASS acronym stand
for?
A. Pull, Aim, Squeeze, Sweep
B. Push, Adjust, Spray, Stop
C. Prepare, Activate, Shoot, Secure
D. Point, Apply, Squeeze, Spread
Correct Answer: A. Pull, Aim, Squeeze, Sweep
Rationale: PASS is the standard memory aid for operating a portable
fire extinguisher. Pull the pin, Aim the nozzle at the base of the fire,
Squeeze the handle, and Sweep from side to side. This technique
ensures effective application of the extinguishing agent.
5. What is the maximum allowable safe lifting weight for one person
without mechanical assistance according to general OSHA guidelines?
A. 25 pounds
B. 50 pounds
C. 75 pounds
D. 100 pounds
Correct Answer: B. 50 pounds
Rationale: While there is no strict OSHA regulation setting a single
weight limit, 50 pounds is generally considered the threshold for safe
manual lifting by one person without mechanical assistance. Weights
above this require team lifting, mechanical aids, or ergonomic
assessment to prevent musculoskeletal injuries.
, 4|Page
6. Which type of fire extinguisher should be used on an electrical fire?
A. Class A
B. Class B
C. Class C
D. Class D
Correct Answer: C. Class C
Rationale: Class C fire extinguishers are specifically rated for fires
involving energized electrical equipment. They contain non-conductive
extinguishing agents such as carbon dioxide or dry chemical powder to
prevent electrical shock to the user.
7. What is the proper procedure for handling a chemical spill in a public
area?
A. Immediately clean it up with paper towels
B. Evacuate the area, contain the spill if safe, and notify the supervisor
C. Ignore it if it is a small amount
D. Use a mop and water to dilute the chemical
Correct Answer: B. Evacuate the area, contain the spill if safe, and notify
the supervisor
Rationale: Chemical spills require immediate action to protect
occupants and workers. Evacuation prevents exposure, containment
limits spread, and notifying a supervisor ensures proper cleanup with
appropriate materials and procedures.
