Trimmer Capacitor
Give this one a try later!
small variable capacitors that are adjusted using a screwdriver.
Since the standard unit for inductance is fairly large, it is usually listed in _____.
Give this one a try later!
Millihenrys
6012 Welding Rods
,Give this one a try later!
general-purpose
Industrial Heavy Duty Machine Relay
Give this one a try later!
a relay is a device with contacts that opens and closes a switch as the result
of an input signal (voltage or current) applied to a coil
The induced voltage in an inductor is only present when the current is _____.
Give this one a try later!
Changing
How is a capacitor constructed?
Give this one a try later!
two plates of conductive material separated by an insulating material
called dielectric
The Five Factors that determining the amount of Inductive Reactance an inductor will
introduce to a circuit are:
, Give this one a try later!
Number of Turns in the Coil, Diameter of the Coil, Length of the Coil, Type
of Core, Frequency of the Alternating Current
A _____ is a non-conducting material between the plates of a capacitor.
Give this one a try later!
Dielectric
Variable Frequency Drive (VFD)
Give this one a try later!
a device that changes AC frequency (and sometimes voltage) to vary the
speed of AC motors. Used for smooth startups or to prevent a heavy load
from straining the motor on startup. They allow the operator to control the
flow of a pump manually or via automation with a PLC. These are also used
in servo systems, air compressors, conveyor system lathes, mills, HVAC
fans, blowers, and many more applications.
An _____ can be added to a filter to smooth out the ripple in power supply outputs.
Give this one a try later!
Inductor
Give this one a try later!
small variable capacitors that are adjusted using a screwdriver.
Since the standard unit for inductance is fairly large, it is usually listed in _____.
Give this one a try later!
Millihenrys
6012 Welding Rods
,Give this one a try later!
general-purpose
Industrial Heavy Duty Machine Relay
Give this one a try later!
a relay is a device with contacts that opens and closes a switch as the result
of an input signal (voltage or current) applied to a coil
The induced voltage in an inductor is only present when the current is _____.
Give this one a try later!
Changing
How is a capacitor constructed?
Give this one a try later!
two plates of conductive material separated by an insulating material
called dielectric
The Five Factors that determining the amount of Inductive Reactance an inductor will
introduce to a circuit are:
, Give this one a try later!
Number of Turns in the Coil, Diameter of the Coil, Length of the Coil, Type
of Core, Frequency of the Alternating Current
A _____ is a non-conducting material between the plates of a capacitor.
Give this one a try later!
Dielectric
Variable Frequency Drive (VFD)
Give this one a try later!
a device that changes AC frequency (and sometimes voltage) to vary the
speed of AC motors. Used for smooth startups or to prevent a heavy load
from straining the motor on startup. They allow the operator to control the
flow of a pump manually or via automation with a PLC. These are also used
in servo systems, air compressors, conveyor system lathes, mills, HVAC
fans, blowers, and many more applications.
An _____ can be added to a filter to smooth out the ripple in power supply outputs.
Give this one a try later!
Inductor
