OSHA-10 FINAL EXAM LATEST 2026 COMPLETE
ACTUAL FULL LENGTH EXAM CORRECTLY
ANSWERED |SCORE A
1. D-rings and snap-hooks must have a minimum tensile strength of:
5,000 pounds
2. Horizontal lifelines shall be designed, installed, and used under the supervision of a _______ as part
of a complete personal fall arrest system, which maintains a safety factor of at least two.
Qualified Person
3. Preventing fall hazards is a critical part of the construction planning process. Controls to mitigate
fall hazards include installing which of the following?
A. Guardrails
B. Walls
C. Protective covers
D. Parapets
E. All of the above
4. Where there is no specific OSHA standard, employers must comply with the OSH Act's:
General Duty Clause
5. Typically, how long does an employee have to file a complaint with OSHA, when the employee has
been discriminated against for reporting a safety or health hazard?
30 days
6. True or False: OSHA standards appear in the Code of Federal Regulations (CFR).
True
7. True or False: A worker or worker representative can file a complaint about a safety or health
hazard in the workplace.
, True
8. Employers covered by OSHA's standards must display an "It's the Law" poster. What does this
poster address?
Safety and health information
9. Which of following would be best to have when consulting a medical professional about possible
exposure to a harmful chemical?
Safety Data Sheet for the chemical
10. The CFR Parts, such as Part 1926 for Construction, are further broken down into ___________,
which group together specific and detailed standards.
Subparts
11.What are two US government agencies that are good resources for safety and health information?
OSHA and NIOSH
12.OSHA requires fall protection when working near the edge of a trench or excavation that is
_________ or more in depth.
6 feet
13. Every supported scaffold and its components must support, without failure, its own weight and at
least _______ the intended load.
4 times
14. During an OSHA inspection:
You have the right to talk to the inspector privately
15. The OSHA standards for Construction and General Industry are found in:
Parts 1926 and 1910
ACTUAL FULL LENGTH EXAM CORRECTLY
ANSWERED |SCORE A
1. D-rings and snap-hooks must have a minimum tensile strength of:
5,000 pounds
2. Horizontal lifelines shall be designed, installed, and used under the supervision of a _______ as part
of a complete personal fall arrest system, which maintains a safety factor of at least two.
Qualified Person
3. Preventing fall hazards is a critical part of the construction planning process. Controls to mitigate
fall hazards include installing which of the following?
A. Guardrails
B. Walls
C. Protective covers
D. Parapets
E. All of the above
4. Where there is no specific OSHA standard, employers must comply with the OSH Act's:
General Duty Clause
5. Typically, how long does an employee have to file a complaint with OSHA, when the employee has
been discriminated against for reporting a safety or health hazard?
30 days
6. True or False: OSHA standards appear in the Code of Federal Regulations (CFR).
True
7. True or False: A worker or worker representative can file a complaint about a safety or health
hazard in the workplace.
, True
8. Employers covered by OSHA's standards must display an "It's the Law" poster. What does this
poster address?
Safety and health information
9. Which of following would be best to have when consulting a medical professional about possible
exposure to a harmful chemical?
Safety Data Sheet for the chemical
10. The CFR Parts, such as Part 1926 for Construction, are further broken down into ___________,
which group together specific and detailed standards.
Subparts
11.What are two US government agencies that are good resources for safety and health information?
OSHA and NIOSH
12.OSHA requires fall protection when working near the edge of a trench or excavation that is
_________ or more in depth.
6 feet
13. Every supported scaffold and its components must support, without failure, its own weight and at
least _______ the intended load.
4 times
14. During an OSHA inspection:
You have the right to talk to the inspector privately
15. The OSHA standards for Construction and General Industry are found in:
Parts 1926 and 1910
