PROPANE FINAL PRACTICE EXAM (Latest
Update ) 100% Correct
Questions & Answer
The ________ of propane is 1 psig. - Correct answer Regulatory pressure
Containers (other than aluminum or composite) shall be _______ when they have been
involved in a fire and show no distortion before being used or reinstalled. - Correct
answer Requalified
Sections of liquid piping that might develop hydrostatic pressure between closed
shutoff valves shall be provided with a _______. - Correct answer Hydrostatic relief
valve
A single chimney flue serving a listed combination gas and oil burning appliance shall
be _______ to vent the appliance. - Correct answer Properly sized
Emergency shutoff valves shall have ______ means of closing. - Correct answer 3
,The type and kind of LP-gas related sales and service offered to the public require
_________ than sales to industrial, agricultural, and motor fuel customers. - Correct
answer More supervision
Containers, including DOT cylinders, with water capacity less than _________ shall be
charged by weight unless specifically designed to be filled volumetrically. - Correct
answer 200 lbs
Which of the following choices is NOT a means of closing the emergency shutoff valve:
- Correct answer Manual shutoff from a satellite orbiting earth
A listed ______shall be installed at the discharge end of the transfer hose at vehicle fuel
dispensers. - Correct answer Quick-acting shutoff valve
When increasing the size of a vent connector, the size increase shall be made at the
________. - Correct answer Equipment draft hood outlet
, Appliances shall NOT be installed so their ________ are obtained only from a bedroom
or bathroom unless the bedroom or bathroom has the required volume per NFPA 54. -
Correct answer 1. Dilution air
2. Ventilation air
3. Combustion air
No portion of a venting system shall extend or pass through any ______. - Correct
answer Circulating air duct
The vent terminal of a direct vent appliance with an input over 50,000 Btu/hr shall have
at least a ______ vent termination clearance. - Correct answer 12 inches
Excess flow valves shall be designed with a bypass not to exceed a _____. - Correct
answer #60 drill size opening
All DOT containers, including those that appear to be undamaged, are required to be
requalified within ______ of the date of manufacture. - Correct answer 12 years
Update ) 100% Correct
Questions & Answer
The ________ of propane is 1 psig. - Correct answer Regulatory pressure
Containers (other than aluminum or composite) shall be _______ when they have been
involved in a fire and show no distortion before being used or reinstalled. - Correct
answer Requalified
Sections of liquid piping that might develop hydrostatic pressure between closed
shutoff valves shall be provided with a _______. - Correct answer Hydrostatic relief
valve
A single chimney flue serving a listed combination gas and oil burning appliance shall
be _______ to vent the appliance. - Correct answer Properly sized
Emergency shutoff valves shall have ______ means of closing. - Correct answer 3
,The type and kind of LP-gas related sales and service offered to the public require
_________ than sales to industrial, agricultural, and motor fuel customers. - Correct
answer More supervision
Containers, including DOT cylinders, with water capacity less than _________ shall be
charged by weight unless specifically designed to be filled volumetrically. - Correct
answer 200 lbs
Which of the following choices is NOT a means of closing the emergency shutoff valve:
- Correct answer Manual shutoff from a satellite orbiting earth
A listed ______shall be installed at the discharge end of the transfer hose at vehicle fuel
dispensers. - Correct answer Quick-acting shutoff valve
When increasing the size of a vent connector, the size increase shall be made at the
________. - Correct answer Equipment draft hood outlet
, Appliances shall NOT be installed so their ________ are obtained only from a bedroom
or bathroom unless the bedroom or bathroom has the required volume per NFPA 54. -
Correct answer 1. Dilution air
2. Ventilation air
3. Combustion air
No portion of a venting system shall extend or pass through any ______. - Correct
answer Circulating air duct
The vent terminal of a direct vent appliance with an input over 50,000 Btu/hr shall have
at least a ______ vent termination clearance. - Correct answer 12 inches
Excess flow valves shall be designed with a bypass not to exceed a _____. - Correct
answer #60 drill size opening
All DOT containers, including those that appear to be undamaged, are required to be
requalified within ______ of the date of manufacture. - Correct answer 12 years
