1 | Page
FDOT EARTHWORK LEVEL 1 EXAM ACTUAL EXAM QUESTIONS
AND CORRECT ANSWERS (VERIFIED ANSWERS) | LATEST
2026/2027 UPDATE | GRADED A+ | GUARANTEED PASS.
When can percent moisture be approved to be used
with a gauge? - CORRECT ANSWER>>When the gauge
and material has been approved
If a gauge is not approved you have to do what -
CORRECT
ANSWER>>Dig to depth of hole and obtain a sample
from the side walls for a speedy test
To determine the percent maximum density - CORRECT
ANSWER>>Take the
calculated dry density / the maximum density from
proctor x 100 = % max density to the nearest whole
percent
,2 | Page
Thank you for Purchasing this exam
Study Guide. We provide high-quality
academic materials to help students
excel in exams. Our other Services
include but not limited to: academic
research, University & College
assignments writing, essay writing,
Online Classes, and research projects.
Our services are reliable, affordable,
and plagiarism-free. All the Best in
your Exam. For more information;
Contact us at:
or
0R
+254 741484450
, 3 | Page
Minimum mixing time for Coarse and Clay material -
CORRECT
ANSWER>>Coarse - 1 minute
Clay - 3 minutes
Determine the dry density by - CORRECT
ANSWER>>Taking the wet density / 1.(moisture) = dry
density
To the nearest 0.1pcf
On limerock you use the what reading - CORRECT
ANSWER>>Direct Dial
If a dial reading exceeds 20% then you - CORRECT
ANSWER>>Re-run with half the sample (10 or 13) and
perform the test normally and double the dial reading
by 2
FDOT EARTHWORK LEVEL 1 EXAM ACTUAL EXAM QUESTIONS
AND CORRECT ANSWERS (VERIFIED ANSWERS) | LATEST
2026/2027 UPDATE | GRADED A+ | GUARANTEED PASS.
When can percent moisture be approved to be used
with a gauge? - CORRECT ANSWER>>When the gauge
and material has been approved
If a gauge is not approved you have to do what -
CORRECT
ANSWER>>Dig to depth of hole and obtain a sample
from the side walls for a speedy test
To determine the percent maximum density - CORRECT
ANSWER>>Take the
calculated dry density / the maximum density from
proctor x 100 = % max density to the nearest whole
percent
,2 | Page
Thank you for Purchasing this exam
Study Guide. We provide high-quality
academic materials to help students
excel in exams. Our other Services
include but not limited to: academic
research, University & College
assignments writing, essay writing,
Online Classes, and research projects.
Our services are reliable, affordable,
and plagiarism-free. All the Best in
your Exam. For more information;
Contact us at:
or
0R
+254 741484450
, 3 | Page
Minimum mixing time for Coarse and Clay material -
CORRECT
ANSWER>>Coarse - 1 minute
Clay - 3 minutes
Determine the dry density by - CORRECT
ANSWER>>Taking the wet density / 1.(moisture) = dry
density
To the nearest 0.1pcf
On limerock you use the what reading - CORRECT
ANSWER>>Direct Dial
If a dial reading exceeds 20% then you - CORRECT
ANSWER>>Re-run with half the sample (10 or 13) and
perform the test normally and double the dial reading
by 2
