MATERIALS STORAGE STUDY GUIDE 2026/2027
QUESTIONS AND SOLUTIONS RATED A+
✔✔Safe lifting training can help prevent back injuries caused by improper technique. -
✔✔True
✔✔Ergonomics include: - ✔✔Restructuring and changing workplace conditions
✔✔Which of the following is an injury that can be caused by ergonomic hazards? -
✔✔Musculoskeletal Disorder
✔✔A wire rope sling with a strength of 10,000 pounds and a total working load of 2,000
pounds has a design factor (multiplier) of: - ✔✔5
✔✔When disposal materials are dropped more than 20 feet to an exterior location, an
enclosed chute must be used. - ✔✔True
✔✔When using industrial fork-lifts, the load must be at the lowest position for traveling,
and the truck manufacturer's operational requirements must be followed. - ✔✔True
✔✔Maximum safe load limits of _____ must be posted within buildings and structures. -
✔✔Floors
✔✔Used lumber must have which of the following withdrawn before stacking? -
✔✔Nails
✔✔Which of the following is the principal source of compensable injuries in the
American work force? - ✔✔Manual material handling
✔✔Which of the following is required for inclusion on a synthetic webbing label? - ✔✔All
of the above
✔✔When traveling on a fork lift, the carried load must be at the highest feasible position
during travel - ✔✔False
✔✔Safe lifting training should include: - ✔✔All of the above
✔✔General requirements do not apply to slings used in conjunction with other material
handling equipment for the movement of material by hoisting - ✔✔False
QUESTIONS AND SOLUTIONS RATED A+
✔✔Safe lifting training can help prevent back injuries caused by improper technique. -
✔✔True
✔✔Ergonomics include: - ✔✔Restructuring and changing workplace conditions
✔✔Which of the following is an injury that can be caused by ergonomic hazards? -
✔✔Musculoskeletal Disorder
✔✔A wire rope sling with a strength of 10,000 pounds and a total working load of 2,000
pounds has a design factor (multiplier) of: - ✔✔5
✔✔When disposal materials are dropped more than 20 feet to an exterior location, an
enclosed chute must be used. - ✔✔True
✔✔When using industrial fork-lifts, the load must be at the lowest position for traveling,
and the truck manufacturer's operational requirements must be followed. - ✔✔True
✔✔Maximum safe load limits of _____ must be posted within buildings and structures. -
✔✔Floors
✔✔Used lumber must have which of the following withdrawn before stacking? -
✔✔Nails
✔✔Which of the following is the principal source of compensable injuries in the
American work force? - ✔✔Manual material handling
✔✔Which of the following is required for inclusion on a synthetic webbing label? - ✔✔All
of the above
✔✔When traveling on a fork lift, the carried load must be at the highest feasible position
during travel - ✔✔False
✔✔Safe lifting training should include: - ✔✔All of the above
✔✔General requirements do not apply to slings used in conjunction with other material
handling equipment for the movement of material by hoisting - ✔✔False
