• ¿Documento equivocado? Cámbialo gratis
  • Escrito por estudiantes que aprobaron
  • Inmediatamente disponible después del pago
  • Leer en línea o como PDF
Vender
¿Dónde estudias?
Tu idioma
Document preview thumbnail
Vista previa 4 fuera de 44 páginas
Examen

Propane Practice Test Questions and Correct Answers 2026

Document preview thumbnail
Vista previa 4 fuera de 44 páginas

This document contains a comprehensive collection of propane practice test questions and correct answers covering LP-gas systems, installation requirements, safety standards, and NFPA regulations. It includes topics such as venting systems, gas piping, propane containers, pressure regulators, leak testing, combustion air, appliance installation, cylinders, storage requirements, transportation, and NFPA 54 and NFPA 58 codes. The material is presented in a question-and-answer format, making it an effective study guide for certification, licensing, exam preparation, and review.

Vista previa del contenido

Propane Practice Updated Tests
Questions And Correct Answers


According to the Two Permanent Openings Method one opening must
commence within ____ and one must commence within ___ of the enclosure

12 inches of the top 12 inches of the bottom




Room heaters shall NOT be installed in what occupancies?

Health care and Residential board and care.




Define a type B-W gas vent:

It shall not have a listed capacity NOT LESS than that of the listed vented wall
furnace to which it is connected.




Listed vented wall furnaces shall use which type of venting system?

Type B-W gas vent




NO portion of a venting system shall extend or pass through any....

Fabricated air duct OR Furnace plenum

,The exit terminals of mechanical draft systems shall not be LESS than
___________ when located adjacent to public walkways.

7 ft above finished ground level




Forced draft systems and all portions of induced draft systems under positive
pressure during operation shall be designed and installed so as to
_____________.

Prevent leakage of flue gases into the building




Mechanical draft systems shall be _______ .

Listed




A chimney for residential type or low heat appliances shall extend at least 2
feet higher than any portion of a building within a horizontal distance of
_______.

10 feet




Category I Vented appliance

,An appliance that operates with a non-positive vent static pressure and with a
vent gas temperature that avoids excessive condensate production in the vent.




Type 1 and Type 2 clothes dryers shall be exhausted to the ________.

Outside




Ventilating hoods and exhaust systems shall be ________ installed in
commercial applications and to vent industrial equipment.

Permitted to vent gas appliances




What appliances are NOT required to be vented?

Counter appliances or Direct gas-fired make-up air heaters




What is the correct spacing of supports for 3/4" or 1" steel pipe?

Every 8 feet




Regarding indoor combustion air, what method states the minimum volume
shall be 50 cube feet per 1000 Btu/hour?

Standard method

, All dispensers shall be installed on what type of foundation?

Concrete




The number of containers in a building undergoing minor renovations shall NOT
exceed the ________ assigned to using the LP-gas.

Number of workers and shall not exceed ______ lbs in size




Aboveground containers shall be ________.

Painted




All regulators for outdoor installations shall be designed, _______ or protected
so that operation will not be affected by the elements.

Installed




Temperature sensitive elements of emergency shutoff valves shall NOT be
________ .

Painted

Información del documento

Subido en
20 de julio de 2026
Número de páginas
44
Escrito en
2025/2026
Tipo
Examen
Contiene
Preguntas y respuestas
$11.99

¿Documento equivocado? Cámbialo gratis Dentro de los 14 días posteriores a la compra y antes de descargarlo, puedes elegir otro documento. Puedes gastar el importe de nuevo.
Escrito por estudiantes que aprobaron
Inmediatamente disponible después del pago
Leer en línea o como PDF

Seller avatar
Los indicadores de reputación están sujetos a la cantidad de artículos vendidos por una tarifa y las reseñas que ha recibido por esos documentos. Hay tres niveles: Bronce, Plata y Oro. Cuanto mayor reputación, más podrás confiar en la calidad del trabajo del vendedor.
Hosmerit
4.7
(261)
Vendido
437
Seguidores
46
Artículos
4713
Última venta
8 horas hace



Por qué los estudiantes eligen Stuvia

Creado por compañeros estudiantes, verificado por reseñas

Calidad en la que puedes confiar: escrito por estudiantes que aprobaron y evaluado por otros que han usado estos resúmenes.

¿No estás satisfecho? Elige otro documento

¡No te preocupes! Puedes elegir directamente otro documento que se ajuste mejor a lo que buscas.

Paga como quieras, empieza a estudiar al instante

Sin suscripción, sin compromisos. Paga como estés acostumbrado con tarjeta de crédito y descarga tu documento PDF inmediatamente.

Student with book image

“Comprado, descargado y aprobado. Así de fácil puede ser.”

Alisha Student

Preguntas frecuentes