API 1169 LATEST EXAM TEST 2026/2027 QUESTIONS
AND SOLUTIONS RATED A+
✔✔Is - ✔✔FEB coating is or is not required to be jeeped?
✔✔grade, wall thickness or both - ✔✔On systems where pipe is telescoped by
_______, particular care shall be taken to ensure proper placement of pipe.
✔✔46 - ✔✔According to Title 49, CFR 192: A class 3 location is any class location unit
that has ______ or more buildings intended for human occupancy.
✔✔Tensile-strength specimens shall be subject to the nick-break test - ✔✔For welder
qualification, the specimens shall be prepared for tensile-strenght, nick-break, and bend
tests. When tensile-strength tests are omitted:
✔✔API 1104 - ✔✔What code outlines specifications for side-boom spacing during
lowering in?
✔✔50 - ✔✔In regards to hazardous liquids onshore pipelines, pumping equipment must
be installed on property that is under the control of the operator and at least_______ ft
from the boundary of the pump station.
✔✔Should not - ✔✔Inspectors during stringing (should or should not?) inspect for which
of the following:
-tag ropes and frayed cables
- pipe spacers and skid count
-pipe placement and it's wall thickness?
✔✔100 ft - ✔✔During a pressure test, the pressure recorders and deadweight gauge
shall be located at a safe distance at least_______ from the facility tested.
✔✔Pressure testing - ✔✔The following should be available during which portion of pipe
install?
-Mobile light plants
-Emergency spill kit
-Ladders
-Whip checks
-Fire extinguisher
-Warning signs and barricades
✔✔5 - ✔✔Per title 50 CFR 21, licensed vets must keep records for _____ yrs of all
migratory birds that die while in their care.
✔✔Cave-ins - ✔✔Protective system is defined as:
-Protecting by use of shield
, -Protecting from cave-ins
-A system that assures employees are safe from all hazards
-A system that assures employees are safe from expected hazards.
✔✔The removal of imperfections prior to visual or NDT examination - ✔✔Rework is:
-Filing the toes of the weld to create the correct profile
-Grinding or welding on a completed weld that was rejected by examination
-The removal of imperfections prior to visual on NDT examination
-Any grinding or welding on a completed weld to correct potentially rejectable
indications
✔✔International - ✔✔The letter "I" identifies shipping names appropriate for describing
materials in _________ transportation
-intrastate by rail
-interstate by rail
-International Transport
✔✔Site -specific - ✔✔What type of hazard is a waterway crossing:
-Env
-Job site
-Site-specific
-Climatic
✔✔weight of the pipe including components - ✔✔What is an example of a sustained
load:
-total volume of pipe including components, etc
-total flow of pipe including components, etc
-weight of the pipe including components, etc
✔✔ASME B31.8 - ✔✔What is the standard for acceptance for welds of piping systems
operating at hoop stress levels 50% of SMYS
-ASME B31.4
-ASME B31.8
-API 1104
-API 1169
✔✔Strength pressure test - ✔✔Which pressure test is designed to establish the
operating pressure limit of a pipe?
-Strength pressure
-Hydrostatic pressure
-Spike pressure
-Leak pressure
AND SOLUTIONS RATED A+
✔✔Is - ✔✔FEB coating is or is not required to be jeeped?
✔✔grade, wall thickness or both - ✔✔On systems where pipe is telescoped by
_______, particular care shall be taken to ensure proper placement of pipe.
✔✔46 - ✔✔According to Title 49, CFR 192: A class 3 location is any class location unit
that has ______ or more buildings intended for human occupancy.
✔✔Tensile-strength specimens shall be subject to the nick-break test - ✔✔For welder
qualification, the specimens shall be prepared for tensile-strenght, nick-break, and bend
tests. When tensile-strength tests are omitted:
✔✔API 1104 - ✔✔What code outlines specifications for side-boom spacing during
lowering in?
✔✔50 - ✔✔In regards to hazardous liquids onshore pipelines, pumping equipment must
be installed on property that is under the control of the operator and at least_______ ft
from the boundary of the pump station.
✔✔Should not - ✔✔Inspectors during stringing (should or should not?) inspect for which
of the following:
-tag ropes and frayed cables
- pipe spacers and skid count
-pipe placement and it's wall thickness?
✔✔100 ft - ✔✔During a pressure test, the pressure recorders and deadweight gauge
shall be located at a safe distance at least_______ from the facility tested.
✔✔Pressure testing - ✔✔The following should be available during which portion of pipe
install?
-Mobile light plants
-Emergency spill kit
-Ladders
-Whip checks
-Fire extinguisher
-Warning signs and barricades
✔✔5 - ✔✔Per title 50 CFR 21, licensed vets must keep records for _____ yrs of all
migratory birds that die while in their care.
✔✔Cave-ins - ✔✔Protective system is defined as:
-Protecting by use of shield
, -Protecting from cave-ins
-A system that assures employees are safe from all hazards
-A system that assures employees are safe from expected hazards.
✔✔The removal of imperfections prior to visual or NDT examination - ✔✔Rework is:
-Filing the toes of the weld to create the correct profile
-Grinding or welding on a completed weld that was rejected by examination
-The removal of imperfections prior to visual on NDT examination
-Any grinding or welding on a completed weld to correct potentially rejectable
indications
✔✔International - ✔✔The letter "I" identifies shipping names appropriate for describing
materials in _________ transportation
-intrastate by rail
-interstate by rail
-International Transport
✔✔Site -specific - ✔✔What type of hazard is a waterway crossing:
-Env
-Job site
-Site-specific
-Climatic
✔✔weight of the pipe including components - ✔✔What is an example of a sustained
load:
-total volume of pipe including components, etc
-total flow of pipe including components, etc
-weight of the pipe including components, etc
✔✔ASME B31.8 - ✔✔What is the standard for acceptance for welds of piping systems
operating at hoop stress levels 50% of SMYS
-ASME B31.4
-ASME B31.8
-API 1104
-API 1169
✔✔Strength pressure test - ✔✔Which pressure test is designed to establish the
operating pressure limit of a pipe?
-Strength pressure
-Hydrostatic pressure
-Spike pressure
-Leak pressure
