MILLWRIGHT LEVEL 1 UPDATED EXAM SCRIPT 2026/2027
QUESTIONS AND SOLUTIONS RATED A+
✔✔To avoid infection and allergic reactions that could possibly be fatal, one of the best
practices is to avoid entering any are without understanding the hazards that might be
present. - ✔✔True
✔✔When welding, a crew members is commonly exposed to _________ radiation. -
✔✔Beta
✔✔Frustration is the feeling of security while being unaware of potential danger. -
✔✔False
✔✔In many cases, even before hired, the millwright must pass a site-specific safety
test. - ✔✔True
✔✔________ meetings are daily meetings that take place before any work is
conducted. - ✔✔Toolbox
✔✔A ________ ________ arrest system is a type of PPE that eliminates impact during
fall. - ✔✔Personal Fall
✔✔Stepladders should be opened fully and placed on a stable, level surface to prevent
tipping. - ✔✔True
✔✔For maximum stability, the crew member must always maintain ________ ________
contact while using ladder. - ✔✔Three Point
✔✔Which of the following typically includes a set of vertical supports, horizontal rails,
and wood or metal platforms? - ✔✔Scaffold
✔✔A confined space is any space that is designed for continuous occupancy. -
✔✔False
✔✔Which of the following items are included in a personal fall arrest system (PFAS)? -
✔✔Anchorages, connectors and a full body harness
✔✔Only those who are trained and authorized are allowed to enter a confined space. -
✔✔True
✔✔In most cases when lifting objects, the freestyle method of lifting should be used. -
✔✔False
,✔✔The best way to avoid dehydration is to drink small amounts of water throughout the
day. - ✔✔True
✔✔The numbers 0, 1, 2, and 3 are examples of what? - ✔✔Whole numbers
✔✔In division the problem = 32, the number 3 is called what? - ✔✔Divisor
✔✔Reducing a fraction requires multiplying. - ✔✔False
✔✔When adding and subtracting fractions, the denominator must be the same for all
fractions. - ✔✔True
✔✔Using ________ and reading a ________ chart are two ways to convert between
fractions and decimals. - ✔✔Math, Conversion
✔✔________ is the measurement of a surface contained within a two-dimensional
boundary. - ✔✔Area
✔✔Calculating area requires multiplying length, width, and height. - ✔✔False
✔✔The ________ ________ is used to find the missing length of one side of a right
angle. - ✔✔3, 4, 5
✔✔The 57 5/16" method is used to draw an arc that includes 1" increments. - ✔✔True
✔✔When machine's power source has been disconnected, it is considered which of the
following? - ✔✔De-engergized
✔✔The process of rendering machinery inoperative is called _______/________ -
✔✔Lockout/ Tagout
✔✔Even is a machine's primary energy has been disconnected, the machine may still
contain ________ energy. - ✔✔Stored
✔✔Which of the following is not a form of stored hazardous energy? - ✔✔Biological
✔✔Lockout/tagout programs will vary between each facility. - ✔✔true
✔✔Personnel who are responsible for performing lockout/tagout procedures are called
affected employees. - ✔✔False
, ✔✔Crew members must record the use and return of isolation locks in an ________
________ - ✔✔Isolation Log
✔✔Facility operations personnel typically place the keys for locks used in lockout/tagout
in a ________ ________ - ✔✔Lock Box
✔✔A formal lockout/tagout program should address every type of energy that might be
encountered on the job site. - ✔✔True
✔✔In addition to identifying the machine and defining the type of work to be done, a
permit should provide a detailed description of PPE requirements, air quality in the
vicinity o the machines, and other information, such as specialty tools required. -
✔✔True
✔✔In the English (SAE) systemwide of measurement, the inch can be broken down into
fractions or decimals. - ✔✔True
✔✔Tape measures can be marked with English (SAE) units on one side and metric (SI)
unites on the other side. - ✔✔True
✔✔The vials of a ________ are used to determine if the surface is leveled horizontally,
plumb or at a 45 degree angle. - ✔✔Level
✔✔A ________ ________ is used to transfer a point from one elevation to another, as
when transferring an exact point from the floor to the ceiling. - ✔✔Plumb Bob
✔✔The advantage of the ________ ________ wrench is that an area of listed space
above the fastener, the wrench can be engaged from the side. - ✔✔Open End
✔✔When tightening a nut or bolt together, the nut is held stationary and the bolt is
turned. - ✔✔False
✔✔The opening between the jaws of an ________ wrench can be made wider or
narrower by turning a knurled screw built into the handle. - ✔✔Adjustable
✔✔The ______ point socket and the ________ point socket are the most common
found in the millwright's toolbox. - ✔✔6, 12
✔✔________ ________ sockets are designed for use with fasteners that have a greater
than normal protrusion. - ✔✔Deep Well
QUESTIONS AND SOLUTIONS RATED A+
✔✔To avoid infection and allergic reactions that could possibly be fatal, one of the best
practices is to avoid entering any are without understanding the hazards that might be
present. - ✔✔True
✔✔When welding, a crew members is commonly exposed to _________ radiation. -
✔✔Beta
✔✔Frustration is the feeling of security while being unaware of potential danger. -
✔✔False
✔✔In many cases, even before hired, the millwright must pass a site-specific safety
test. - ✔✔True
✔✔________ meetings are daily meetings that take place before any work is
conducted. - ✔✔Toolbox
✔✔A ________ ________ arrest system is a type of PPE that eliminates impact during
fall. - ✔✔Personal Fall
✔✔Stepladders should be opened fully and placed on a stable, level surface to prevent
tipping. - ✔✔True
✔✔For maximum stability, the crew member must always maintain ________ ________
contact while using ladder. - ✔✔Three Point
✔✔Which of the following typically includes a set of vertical supports, horizontal rails,
and wood or metal platforms? - ✔✔Scaffold
✔✔A confined space is any space that is designed for continuous occupancy. -
✔✔False
✔✔Which of the following items are included in a personal fall arrest system (PFAS)? -
✔✔Anchorages, connectors and a full body harness
✔✔Only those who are trained and authorized are allowed to enter a confined space. -
✔✔True
✔✔In most cases when lifting objects, the freestyle method of lifting should be used. -
✔✔False
,✔✔The best way to avoid dehydration is to drink small amounts of water throughout the
day. - ✔✔True
✔✔The numbers 0, 1, 2, and 3 are examples of what? - ✔✔Whole numbers
✔✔In division the problem = 32, the number 3 is called what? - ✔✔Divisor
✔✔Reducing a fraction requires multiplying. - ✔✔False
✔✔When adding and subtracting fractions, the denominator must be the same for all
fractions. - ✔✔True
✔✔Using ________ and reading a ________ chart are two ways to convert between
fractions and decimals. - ✔✔Math, Conversion
✔✔________ is the measurement of a surface contained within a two-dimensional
boundary. - ✔✔Area
✔✔Calculating area requires multiplying length, width, and height. - ✔✔False
✔✔The ________ ________ is used to find the missing length of one side of a right
angle. - ✔✔3, 4, 5
✔✔The 57 5/16" method is used to draw an arc that includes 1" increments. - ✔✔True
✔✔When machine's power source has been disconnected, it is considered which of the
following? - ✔✔De-engergized
✔✔The process of rendering machinery inoperative is called _______/________ -
✔✔Lockout/ Tagout
✔✔Even is a machine's primary energy has been disconnected, the machine may still
contain ________ energy. - ✔✔Stored
✔✔Which of the following is not a form of stored hazardous energy? - ✔✔Biological
✔✔Lockout/tagout programs will vary between each facility. - ✔✔true
✔✔Personnel who are responsible for performing lockout/tagout procedures are called
affected employees. - ✔✔False
, ✔✔Crew members must record the use and return of isolation locks in an ________
________ - ✔✔Isolation Log
✔✔Facility operations personnel typically place the keys for locks used in lockout/tagout
in a ________ ________ - ✔✔Lock Box
✔✔A formal lockout/tagout program should address every type of energy that might be
encountered on the job site. - ✔✔True
✔✔In addition to identifying the machine and defining the type of work to be done, a
permit should provide a detailed description of PPE requirements, air quality in the
vicinity o the machines, and other information, such as specialty tools required. -
✔✔True
✔✔In the English (SAE) systemwide of measurement, the inch can be broken down into
fractions or decimals. - ✔✔True
✔✔Tape measures can be marked with English (SAE) units on one side and metric (SI)
unites on the other side. - ✔✔True
✔✔The vials of a ________ are used to determine if the surface is leveled horizontally,
plumb or at a 45 degree angle. - ✔✔Level
✔✔A ________ ________ is used to transfer a point from one elevation to another, as
when transferring an exact point from the floor to the ceiling. - ✔✔Plumb Bob
✔✔The advantage of the ________ ________ wrench is that an area of listed space
above the fastener, the wrench can be engaged from the side. - ✔✔Open End
✔✔When tightening a nut or bolt together, the nut is held stationary and the bolt is
turned. - ✔✔False
✔✔The opening between the jaws of an ________ wrench can be made wider or
narrower by turning a knurled screw built into the handle. - ✔✔Adjustable
✔✔The ______ point socket and the ________ point socket are the most common
found in the millwright's toolbox. - ✔✔6, 12
✔✔________ ________ sockets are designed for use with fasteners that have a greater
than normal protrusion. - ✔✔Deep Well
