NCCER Electrical Level 2 Module 6-Solved
Where several conductors are pulled together, they should be arranged ________
on the fish tape. - ANSWER-Staggered
The best device for transporting very large cable reels is a ______. - ANSWER-
Forklift
The device used to inspect a raceway system is a _____ . - ANSWER-Mandrel
Two c l e v i s types are _______. - ANSWER-Straight and Swivel
A ______ wire-pulling rope is not commonly used today. - ANSWER-Hemp
A ____ wire-pulling rope commonly used today. - ANSWER-Nylon
The ends of 1,000 kcmil conductors can he trimmed using ______. - ANSWER-
Cable Cutters
The substance used to lessen the friction inside a raceway during a wire pull is
________________ - ANSWER-wire pulling lubricant ( soap )
The feed-in setup should unreel the cable ________ . - ANSWER-along its natural
curvature
Long lengths of cable can be pulled using _____. - ANSWER-Cable Grips
When conductors In vertical raceways must be supported, one cable support shall
be provided ________________ - ANSWER-at the top or as dose to the top of the
raceway as practical
A runaway in a vertical pull is caused by ________. - ANSWER-Cable Weight and
Gravity
A good place to find data for pulling certain brands of cables is from
______________ - ANSWER-Manufacturers Catalogs
The main purpose of a dynamometer is _________. - ANSWER-Monitoring Pulling
Tension
The purpose of sealing cable ends when reels of cable are in storage is
______________ - ANSWER-to keep moisture from creeping in
Who is allowed to stop the pull at the first sign of danger to the cable, raceway
system, or - ANSWER-Anyone involved with the pull
Where several conductors are pulled together, they should be arranged ________
on the fish tape. - ANSWER-Staggered
The best device for transporting very large cable reels is a ______. - ANSWER-
Forklift
The device used to inspect a raceway system is a _____ . - ANSWER-Mandrel
Two c l e v i s types are _______. - ANSWER-Straight and Swivel
A ______ wire-pulling rope is not commonly used today. - ANSWER-Hemp
A ____ wire-pulling rope commonly used today. - ANSWER-Nylon
The ends of 1,000 kcmil conductors can he trimmed using ______. - ANSWER-
Cable Cutters
The substance used to lessen the friction inside a raceway during a wire pull is
________________ - ANSWER-wire pulling lubricant ( soap )
The feed-in setup should unreel the cable ________ . - ANSWER-along its natural
curvature
Long lengths of cable can be pulled using _____. - ANSWER-Cable Grips
When conductors In vertical raceways must be supported, one cable support shall
be provided ________________ - ANSWER-at the top or as dose to the top of the
raceway as practical
A runaway in a vertical pull is caused by ________. - ANSWER-Cable Weight and
Gravity
A good place to find data for pulling certain brands of cables is from
______________ - ANSWER-Manufacturers Catalogs
The main purpose of a dynamometer is _________. - ANSWER-Monitoring Pulling
Tension
The purpose of sealing cable ends when reels of cable are in storage is
______________ - ANSWER-to keep moisture from creeping in
Who is allowed to stop the pull at the first sign of danger to the cable, raceway
system, or - ANSWER-Anyone involved with the pull
