NATE GAS HEATING EXAM WITH CORRECT
ACTUAL QUESTIONS AND CORRECTLY WELL
DEFINED ANSWERS LATEST ALREADY GRADED
A+ 2026
Save
Terms in this set (50)
Since 1992, the United States C: 78%
Department of Energy has required
that all furnaces sold and installed
from that date on must have an
AFUE of no less than:
A: 70%
B: 75%
C: 78%
D: 80%
,Many pre-1992 furnaces have C: 60%
efficiencies around _______.
A: 10%
B: 40%
C: 60%
D: 80%
Today, furnaces with AFUE ratings B: 90%
greater than _____ are available.
A: 85%
B: 90%
C: 100%
D: 110%
, A thermocouple is used with: D: Standing pilot ignition systems
A: Intermittent pilot systems
B: Direct spark ignition systems
C: Glow coil ignition systems
D: Standing pilot ignition systems
The purpose of the gas pressure C: Maintain a constant gas pressure at the burner
regulator is to:
A: Keep the color of the flame
constant
B: Keep the high limit switch from
tripping
C: Maintain a constant gas pressure
at the burner
D: Allow the gas valve to operate
smoothly and accurately
The instrument used to measure C: Monometer
outlet gas pressure is the:
A: Velometer
B: Anemometer
C: Monometer
D: Draft gauge
ACTUAL QUESTIONS AND CORRECTLY WELL
DEFINED ANSWERS LATEST ALREADY GRADED
A+ 2026
Save
Terms in this set (50)
Since 1992, the United States C: 78%
Department of Energy has required
that all furnaces sold and installed
from that date on must have an
AFUE of no less than:
A: 70%
B: 75%
C: 78%
D: 80%
,Many pre-1992 furnaces have C: 60%
efficiencies around _______.
A: 10%
B: 40%
C: 60%
D: 80%
Today, furnaces with AFUE ratings B: 90%
greater than _____ are available.
A: 85%
B: 90%
C: 100%
D: 110%
, A thermocouple is used with: D: Standing pilot ignition systems
A: Intermittent pilot systems
B: Direct spark ignition systems
C: Glow coil ignition systems
D: Standing pilot ignition systems
The purpose of the gas pressure C: Maintain a constant gas pressure at the burner
regulator is to:
A: Keep the color of the flame
constant
B: Keep the high limit switch from
tripping
C: Maintain a constant gas pressure
at the burner
D: Allow the gas valve to operate
smoothly and accurately
The instrument used to measure C: Monometer
outlet gas pressure is the:
A: Velometer
B: Anemometer
C: Monometer
D: Draft gauge