ANSWERS|GRADED A+|PASS ON FIRST ATTEMPT|BRAND NEW
The contents of the jobsite first aid kit must be in individually sealed package, and be
checked by the employer at least ______ on each job to ensure expiration dates have not ex-
pired. - ANSWER Weekly
As part of housekeeping, combustible scrap and debris on a jobsite must be ______ at regu-
lar intervals during construction. - ANSWER Removed
If 25 jobsite employees are present on a jobsite, what toilet facilities must be provided? -
ANSWER 1 toilet seat and 1 urinal
An employee is exposed to the following noise levels
throughout their day. Are they over the permissible exposure limit: 110 dba for ¼ hour + 105
dba for ½ hour + 95 dba for 3 hours? - ANSWER Yes (combined total of 1.75 limit)
Employees are limited to a maximum exposure time of _____ hours for noise up to 95 dba. -
ANSWER 4
Illumination measured in foot-candles in general construction areas should, at the minimum
be: - ANSWER 3 foot-candles
All employees working in areas where there is a possible danger of head injury from falling
to flying objects to electrical shock and burns must wear: - ANSWER Protective helmets
Who is responsible for providing each employee with head protection that meets the specifi-
cation contained in any of the consensus American National
Standards Institute (ANSI standards? - ANSWER Employer
1
,When employees are to be exposed to eye and face hazards from flying particles, molten
metal, liquid chemicals, acids or caustic liquids, etc. the employer must provide: - AN-
SWER Eye and face protection
A safety belt lanyard must be a minimum of ________ Or equivalent, with a maximum
length to provide for a fall of no greater than 6 feet. - ANSWER 1/2 inch nylon
Nets need to extend how far beyond the edge of the work surface where employees are ex-
posed to a danger of falling? - ANSWER 8 feet
What can be substituted for a fire extinguisher having a 2A
rating? - ANSWER One 55 gallon open drum of water with two fire pails
Where should quantities of flammable liquid in excess of 25 gallons be stored? - ANSWER
In an acceptable or approved cabinet
For Class B fires (flammable liquids, gasoline, oil, paints, grease, etc.) all of the following type
of extinguishers are allowed except: - ANSWER Soda acid
Not more than 60 gallons of Category 1, 2, and/or 3 flammable liquid or ________ gallons of
Category 4 flammable liquid must be stored in any one storage cabinet. - ANSWER 120
When using heaters in confined spaces, care needs to be taken to provide _______ in order
to ensure proper safety. - ANSWER Sufficient ventilation
The minimum clearances for a radiant type room heater for
sides and rear is: - ANSWER 36
2
,Heaters used near combustible tarpaulins, canvas, or similar coverings need to be located at
least how far from the coverings? - ANSWER 10 feet
With general requirement for storage, materials stored inside buildings under
construction must not be placed within ______ of any hoistway or inside floor openings. -
ANSWER 6 feet
________ must be stacked by stepping back the layers and cross-keying the bags at least
every 10 bags high. - ANSWER Bagged materials
When masonry blocks are stacked higher than 6 feet, the stack must be tapered back
_______ block per tier above the 6-foot level. - ANSWER 1/2
When a loose brick stack reaches a height of ______ for safety it shall be
tapered back 2 inches in every foot of height above the 4-foot level. - ANSWER 4 feet
Used lumber must have all ______ withdrawn before stacking. - ANSWER Nails
Lumber piles must NOT exceed _______ ft in height provided that lumber to be handled
manually is not stacked more than 16 ft high. - ANSWER 20
Rigging equipment for material handling needs to be inspected prior to use on each shift and
as necessary during use to ensure that it is ________. - ANSWER Safe
The area onto which material can be dropped when debris is dropped through holes in a
floor without a chute needs to be completely enclosed with barricades NOT less than
__________ high and NOT less
than _________ back from the projected edge of the opening above. - ANSWER 42
inches | 6 feet
3
, An enclosed chute must be used whenever materials are dropped more than ________ to
any point lying outside the exterior walls of the building. - ANSWER 20 feet
Rubbish must be ______ from the immediate work area as the work progresses. - AN-
SWER Removed
All of the following must be kept in a fire resistant covered container until removed from the
worksite except: - ANSWER Scrap lumber
When power operated tools are designed with guards, they __________ be equipped with
such guards when in use. - ANSWER Should always
Point of operation guarding is: - ANSWER The area where work is actually performed
All the following hand-held powered tools must be equipped with only a positive "on-off"
control except: - ANSWER Angle grinders with wheels greater than 2 inches in diameter
Electric power operated tools must be the approved double-insulated type or __________. -
ANSWER Grounded
All pneumatically driven nailers, staplers, etc. operating at more than 100 p.s.i. must have a
safety device on the ________ to prevent the tool from ejecting fasteners. - ANSWER
Muzzle
Compressed air for cleaning purposes must NOT be used except for where the air is reduced
to less than 30 p.s.i., use with effective chip guarding, and _________ - ANSWER Wearing
PPE
Both the __________ and bench mounted abrasive wheels used for external grinding must
be provided with safety guards and protection hoods. - ANSWER Floor stand
4
The contents of the jobsite first aid kit must be in individually sealed package, and be
checked by the employer at least ______ on each job to ensure expiration dates have not ex-
pired. - ANSWER Weekly
As part of housekeeping, combustible scrap and debris on a jobsite must be ______ at regu-
lar intervals during construction. - ANSWER Removed
If 25 jobsite employees are present on a jobsite, what toilet facilities must be provided? -
ANSWER 1 toilet seat and 1 urinal
An employee is exposed to the following noise levels
throughout their day. Are they over the permissible exposure limit: 110 dba for ¼ hour + 105
dba for ½ hour + 95 dba for 3 hours? - ANSWER Yes (combined total of 1.75 limit)
Employees are limited to a maximum exposure time of _____ hours for noise up to 95 dba. -
ANSWER 4
Illumination measured in foot-candles in general construction areas should, at the minimum
be: - ANSWER 3 foot-candles
All employees working in areas where there is a possible danger of head injury from falling
to flying objects to electrical shock and burns must wear: - ANSWER Protective helmets
Who is responsible for providing each employee with head protection that meets the specifi-
cation contained in any of the consensus American National
Standards Institute (ANSI standards? - ANSWER Employer
1
,When employees are to be exposed to eye and face hazards from flying particles, molten
metal, liquid chemicals, acids or caustic liquids, etc. the employer must provide: - AN-
SWER Eye and face protection
A safety belt lanyard must be a minimum of ________ Or equivalent, with a maximum
length to provide for a fall of no greater than 6 feet. - ANSWER 1/2 inch nylon
Nets need to extend how far beyond the edge of the work surface where employees are ex-
posed to a danger of falling? - ANSWER 8 feet
What can be substituted for a fire extinguisher having a 2A
rating? - ANSWER One 55 gallon open drum of water with two fire pails
Where should quantities of flammable liquid in excess of 25 gallons be stored? - ANSWER
In an acceptable or approved cabinet
For Class B fires (flammable liquids, gasoline, oil, paints, grease, etc.) all of the following type
of extinguishers are allowed except: - ANSWER Soda acid
Not more than 60 gallons of Category 1, 2, and/or 3 flammable liquid or ________ gallons of
Category 4 flammable liquid must be stored in any one storage cabinet. - ANSWER 120
When using heaters in confined spaces, care needs to be taken to provide _______ in order
to ensure proper safety. - ANSWER Sufficient ventilation
The minimum clearances for a radiant type room heater for
sides and rear is: - ANSWER 36
2
,Heaters used near combustible tarpaulins, canvas, or similar coverings need to be located at
least how far from the coverings? - ANSWER 10 feet
With general requirement for storage, materials stored inside buildings under
construction must not be placed within ______ of any hoistway or inside floor openings. -
ANSWER 6 feet
________ must be stacked by stepping back the layers and cross-keying the bags at least
every 10 bags high. - ANSWER Bagged materials
When masonry blocks are stacked higher than 6 feet, the stack must be tapered back
_______ block per tier above the 6-foot level. - ANSWER 1/2
When a loose brick stack reaches a height of ______ for safety it shall be
tapered back 2 inches in every foot of height above the 4-foot level. - ANSWER 4 feet
Used lumber must have all ______ withdrawn before stacking. - ANSWER Nails
Lumber piles must NOT exceed _______ ft in height provided that lumber to be handled
manually is not stacked more than 16 ft high. - ANSWER 20
Rigging equipment for material handling needs to be inspected prior to use on each shift and
as necessary during use to ensure that it is ________. - ANSWER Safe
The area onto which material can be dropped when debris is dropped through holes in a
floor without a chute needs to be completely enclosed with barricades NOT less than
__________ high and NOT less
than _________ back from the projected edge of the opening above. - ANSWER 42
inches | 6 feet
3
, An enclosed chute must be used whenever materials are dropped more than ________ to
any point lying outside the exterior walls of the building. - ANSWER 20 feet
Rubbish must be ______ from the immediate work area as the work progresses. - AN-
SWER Removed
All of the following must be kept in a fire resistant covered container until removed from the
worksite except: - ANSWER Scrap lumber
When power operated tools are designed with guards, they __________ be equipped with
such guards when in use. - ANSWER Should always
Point of operation guarding is: - ANSWER The area where work is actually performed
All the following hand-held powered tools must be equipped with only a positive "on-off"
control except: - ANSWER Angle grinders with wheels greater than 2 inches in diameter
Electric power operated tools must be the approved double-insulated type or __________. -
ANSWER Grounded
All pneumatically driven nailers, staplers, etc. operating at more than 100 p.s.i. must have a
safety device on the ________ to prevent the tool from ejecting fasteners. - ANSWER
Muzzle
Compressed air for cleaning purposes must NOT be used except for where the air is reduced
to less than 30 p.s.i., use with effective chip guarding, and _________ - ANSWER Wearing
PPE
Both the __________ and bench mounted abrasive wheels used for external grinding must
be provided with safety guards and protection hoods. - ANSWER Floor stand
4
