Manual Transmission/Transaxle Principles
Final Exam Questions And Correct Answers
Technician A says that a clutch has torsional dampeners that absorb the initial
disengagement of the clutch. Technician B says that a marcel spring is used to
absorb the initial shock of the engagement of the clutch and allows for a smooth
engagement of the clutch. Which technician is correct?
Technician A
Technician A says that a clutch had friction material on one side of the clutch.
Technician B says that the clutch disc has friction material on both side of the
disc. Which technician is correct?
Technician A
Most adjustment procedures call for a clutch pedal free play of 0.5 to 1.0 inch.
True
Technician A says that a misadjusted clutch pedal free play could result in the
clutch not being engaged fully. Technician B says that as the clutch disc wears the
clutch engages much higher when the clutch pedal is released. Which technician
is correct?
Technician A
, Technician A says that the pressure plate is splined to the transmission input
shaft. Technician B says that the pilot bearing supports the clutch. Which
technician is correct?
Neither Technician A nor B
The three methods used in passenger vehicles to transmit the force of the
driver's foot to the throwout bearing are?
A and B
Technician A says to use an alignment tool to center the clutch disc between the
pressure plate and the flywheel. Technician B says when replacing a clutch and
pressure plate to always replace the throwout bearing and pilot bearing. Which
technician is correct?
Technician A
Technician A says in order to replace the clutch the transmission must be
removed. Technician B says to inspect the flywheel and replace or machine it if
there are any signs of wear. Which technician is correct?
Both Technician A and B
Final Exam Questions And Correct Answers
Technician A says that a clutch has torsional dampeners that absorb the initial
disengagement of the clutch. Technician B says that a marcel spring is used to
absorb the initial shock of the engagement of the clutch and allows for a smooth
engagement of the clutch. Which technician is correct?
Technician A
Technician A says that a clutch had friction material on one side of the clutch.
Technician B says that the clutch disc has friction material on both side of the
disc. Which technician is correct?
Technician A
Most adjustment procedures call for a clutch pedal free play of 0.5 to 1.0 inch.
True
Technician A says that a misadjusted clutch pedal free play could result in the
clutch not being engaged fully. Technician B says that as the clutch disc wears the
clutch engages much higher when the clutch pedal is released. Which technician
is correct?
Technician A
, Technician A says that the pressure plate is splined to the transmission input
shaft. Technician B says that the pilot bearing supports the clutch. Which
technician is correct?
Neither Technician A nor B
The three methods used in passenger vehicles to transmit the force of the
driver's foot to the throwout bearing are?
A and B
Technician A says to use an alignment tool to center the clutch disc between the
pressure plate and the flywheel. Technician B says when replacing a clutch and
pressure plate to always replace the throwout bearing and pilot bearing. Which
technician is correct?
Technician A
Technician A says in order to replace the clutch the transmission must be
removed. Technician B says to inspect the flywheel and replace or machine it if
there are any signs of wear. Which technician is correct?
Both Technician A and B
