ASNT LEVEL III CERTIFICATION EXAM 2026
| COMPLETE STUDY GUIDE & PRACTICE
QUESTIONS
| GRADED A+ | GUARANTEED SUCCESS
Updated 2026 Questions and Answers
100% Verified Exam Prep and Comprehensive
Rationales Included
,CH1. 1 - Which of the following statements is true D. SNT-TC-1A is not intended to be used as a strict specification
concerning the usage of SNT-TC-1A?
CH1. 2 - The SNT-TC-1A Interpretation Panel will A. written and stated in general terms
respond to inquiries about SNT-TC-1A. The inquiry muct
be:
CH1. 3 - Which of the following statements is true? B. SNT-TC-1A was first published in the late 1960s
CH1. 4 - With regard to the training of NDT personnel, D. may engage an outside service but is, nevertheless, responsible for the
the employer: certification of the company's NDT personnel
,CH1. 5 - SNT-TC-1A is intended as a guideline for B. to establish their own written practice for the qualification and certification
employers: of their NDT personnel
CH1. 6 - The following is a statement in SNT-TC-1A: "It is C. The employer should review the detailed recommendations and modify
recognized that these guidelines may not be them, as necessary, to meet its particular needs
appropriate for certain employers, circumstances,
and/or applications." What should be done if the
guidelines are not appropriate?
CH1. 7 - Which of the following statements is not true? D. A certifying agency is any organization used by an employer in training NDT
personnel
CH1. 8 - Who should be responsible to asses whether B. The individual's employer
or not an individual should be qualified and certified
who does not perform NDT, but monitors and evaluates
NDT?
CH1. 9 - To which of the following NDT methods is SNT- D. Holographic testing
TC-1A currently not applicable?
CH1. 10 - ASNT intended that the recommendations of a. with flexibility and reason
SNT-TC-1A be applied:
, CH1. 11 - Of the following, which is most appropriate to c. The employer
determine the needs to qualify and certify personnel
whose only NDT function is to operate digital thickness
equipment?
CH1. 12 - Certification is: b. written testimony of qualification
CH1. 13 - Use of SNT-TC-1A is mandatory when: c. it has been specified by the customer
CH1. 14 - The basic levels of qualification recommended c. Level I, Level II, and Level III
by SNT-TC-1A are:
CH1. 15 - Should personnel that operate ultrasonic d. Whether any NDT personnel should be qualified and certified depends
digital thickness measurement equipment be qualified solely upon the needs of the employer and the requirements of the employer's
and certified? customers or clientele
| COMPLETE STUDY GUIDE & PRACTICE
QUESTIONS
| GRADED A+ | GUARANTEED SUCCESS
Updated 2026 Questions and Answers
100% Verified Exam Prep and Comprehensive
Rationales Included
,CH1. 1 - Which of the following statements is true D. SNT-TC-1A is not intended to be used as a strict specification
concerning the usage of SNT-TC-1A?
CH1. 2 - The SNT-TC-1A Interpretation Panel will A. written and stated in general terms
respond to inquiries about SNT-TC-1A. The inquiry muct
be:
CH1. 3 - Which of the following statements is true? B. SNT-TC-1A was first published in the late 1960s
CH1. 4 - With regard to the training of NDT personnel, D. may engage an outside service but is, nevertheless, responsible for the
the employer: certification of the company's NDT personnel
,CH1. 5 - SNT-TC-1A is intended as a guideline for B. to establish their own written practice for the qualification and certification
employers: of their NDT personnel
CH1. 6 - The following is a statement in SNT-TC-1A: "It is C. The employer should review the detailed recommendations and modify
recognized that these guidelines may not be them, as necessary, to meet its particular needs
appropriate for certain employers, circumstances,
and/or applications." What should be done if the
guidelines are not appropriate?
CH1. 7 - Which of the following statements is not true? D. A certifying agency is any organization used by an employer in training NDT
personnel
CH1. 8 - Who should be responsible to asses whether B. The individual's employer
or not an individual should be qualified and certified
who does not perform NDT, but monitors and evaluates
NDT?
CH1. 9 - To which of the following NDT methods is SNT- D. Holographic testing
TC-1A currently not applicable?
CH1. 10 - ASNT intended that the recommendations of a. with flexibility and reason
SNT-TC-1A be applied:
, CH1. 11 - Of the following, which is most appropriate to c. The employer
determine the needs to qualify and certify personnel
whose only NDT function is to operate digital thickness
equipment?
CH1. 12 - Certification is: b. written testimony of qualification
CH1. 13 - Use of SNT-TC-1A is mandatory when: c. it has been specified by the customer
CH1. 14 - The basic levels of qualification recommended c. Level I, Level II, and Level III
by SNT-TC-1A are:
CH1. 15 - Should personnel that operate ultrasonic d. Whether any NDT personnel should be qualified and certified depends
digital thickness measurement equipment be qualified solely upon the needs of the employer and the requirements of the employer's
and certified? customers or clientele
