One or more hoses crossing a main walkway ____________.
Give this one a try later!
Are not acceptable
When inserting a pry truck under a load, the lip of the pry truck should _______________.
Give this one a try later!
Engage the load as far as possible
,The _______________ is a guideline published by the American Conference of Governmental
Industrial Hygienists and outlines how much of particular chemical a worker can be
exposed to without an unreasonable health risk.
Give this one a try later!
Threshold limit value (TLV)
An employee will receive an update to their training record to reflect their
certification when.
Give this one a try later!
forklift training is completed
Operation procedures would not normally be found in ________________.
Give this one a try later!
Emergency manuals
A Safety team may decide a safety audit is required when ___________.
Give this one a try later!
, An accident occurs involving an oil spill
The first step in safely handling hazardous chemicals is __________.
Give this one a try later!
To know the hazards about the chemical you are handling
The safety devices on an electric hoist include both mechanical and electrical
protection.
Give this one a try later!
Overload
Which of the following situations is considered a safety hazard in the plant?
Give this one a try later!
Oil spots on the floor
Working areas at 6 feet or higher require _________.
Give this one a try later!
, Fall protection
Plant personnel should receive training and have proper authorization before __________.
Give this one a try later!
entering a permit- required confined space
Safety glasses with side shields should be worn with _________ for additional eye
protection.
Give this one a try later!
A welding helmet
A pneumatic lockout/tagout uses a _____________ to prevent use.
Give this one a try later!
Lockable valve
A certification from a physician is required before _______________.
Give this one a try later!
Give this one a try later!
Are not acceptable
When inserting a pry truck under a load, the lip of the pry truck should _______________.
Give this one a try later!
Engage the load as far as possible
,The _______________ is a guideline published by the American Conference of Governmental
Industrial Hygienists and outlines how much of particular chemical a worker can be
exposed to without an unreasonable health risk.
Give this one a try later!
Threshold limit value (TLV)
An employee will receive an update to their training record to reflect their
certification when.
Give this one a try later!
forklift training is completed
Operation procedures would not normally be found in ________________.
Give this one a try later!
Emergency manuals
A Safety team may decide a safety audit is required when ___________.
Give this one a try later!
, An accident occurs involving an oil spill
The first step in safely handling hazardous chemicals is __________.
Give this one a try later!
To know the hazards about the chemical you are handling
The safety devices on an electric hoist include both mechanical and electrical
protection.
Give this one a try later!
Overload
Which of the following situations is considered a safety hazard in the plant?
Give this one a try later!
Oil spots on the floor
Working areas at 6 feet or higher require _________.
Give this one a try later!
, Fall protection
Plant personnel should receive training and have proper authorization before __________.
Give this one a try later!
entering a permit- required confined space
Safety glasses with side shields should be worn with _________ for additional eye
protection.
Give this one a try later!
A welding helmet
A pneumatic lockout/tagout uses a _____________ to prevent use.
Give this one a try later!
Lockable valve
A certification from a physician is required before _______________.
Give this one a try later!
