AMPP CIP1 Exam Questions and Answers
with Verified Solutions | Latest Updated
2026
SSPC PA-2 Measurements of DFT with magnetic
gauges
NACE SP0188 Discontinuity (Holiday) Testing of
New Protective Coatings on
Conductive Substrates
NACE SP0178 design/fabrication/surface finish
practices for tanks an vessels to be
lined for immersion service
ASTM D 4417 Standard Test Methods for Field
Measurement of Surface Profile of
Blast Cleaned Steel
SP5, SP10, SP6, SP14, SP7 in 1, 2, 3, 8, 4
NACE order
ISO 8501-1 Sa 3 Blast Cleaning to Visually Clean
Steel
ISO 8501-1 Sa 2 1/2 Very Thorough Blast Cleaning
ISO 8501-1 Sa 2 Thorough Blast Cleaning
, ISO 8501-1 Sa 1 Light Blast Cleaning
ISO 8501-1 St 2 Thorough Hand and Power Tool
Cleaning
ISO 8501-1 St 3 Very Thorough Hand and Power Tool
Cleaning
SSPC-SP 2 Hand Tool Cleaning; removes all
loose mill scale, rust, and coatings
SSPC-SP 3 Power Tool Cleaning-loose stuff that
a putty knife could get
SSPC-SP 11 Power Tool Cleaning to Bare Metal
Don't use air to blow off Lead is present
surface of a coating
Silicone coating, important to Ensure correct application and DFT
NACE NO. 12 / AWS C2.23M / Specification for application of
SSPC- 2300: thermal spray coatings.
Three galvanic anodes for Zinc, aluminum, magnesium
carbon steel
Corrosion occurring uniformly General corrosion
across a surface is called
Three general components of Results of inspection tests, location
inspection reports of work, details of preparation and
with Verified Solutions | Latest Updated
2026
SSPC PA-2 Measurements of DFT with magnetic
gauges
NACE SP0188 Discontinuity (Holiday) Testing of
New Protective Coatings on
Conductive Substrates
NACE SP0178 design/fabrication/surface finish
practices for tanks an vessels to be
lined for immersion service
ASTM D 4417 Standard Test Methods for Field
Measurement of Surface Profile of
Blast Cleaned Steel
SP5, SP10, SP6, SP14, SP7 in 1, 2, 3, 8, 4
NACE order
ISO 8501-1 Sa 3 Blast Cleaning to Visually Clean
Steel
ISO 8501-1 Sa 2 1/2 Very Thorough Blast Cleaning
ISO 8501-1 Sa 2 Thorough Blast Cleaning
, ISO 8501-1 Sa 1 Light Blast Cleaning
ISO 8501-1 St 2 Thorough Hand and Power Tool
Cleaning
ISO 8501-1 St 3 Very Thorough Hand and Power Tool
Cleaning
SSPC-SP 2 Hand Tool Cleaning; removes all
loose mill scale, rust, and coatings
SSPC-SP 3 Power Tool Cleaning-loose stuff that
a putty knife could get
SSPC-SP 11 Power Tool Cleaning to Bare Metal
Don't use air to blow off Lead is present
surface of a coating
Silicone coating, important to Ensure correct application and DFT
NACE NO. 12 / AWS C2.23M / Specification for application of
SSPC- 2300: thermal spray coatings.
Three galvanic anodes for Zinc, aluminum, magnesium
carbon steel
Corrosion occurring uniformly General corrosion
across a surface is called
Three general components of Results of inspection tests, location
inspection reports of work, details of preparation and
