TELUS NEEDS MET TRAINING REVIEW
SCRIPT 2026 FULL ANSWERS GRADED A+
⩥ A network administrator configured a router interface as 10.0.0.95
255.255.255.240. The administrator discovers that the router is not
routing packets to a web server with IP
Answer: The router interface is a broadcast address
⩥ A storage network requires reduced overhead and increased efficiency
for the amout of data being sent. Which of the following should an
engineer likely configure to meet these requirements>?
Answer: Jumbo frames
⩥ A network administrator needs to set up a multicast network for audio
and video broadcasting. Which of the following networks would be the
most appropriate for this application
Answer: 224.0.0.0/24
⩥ A network administrator notices interference with industrial
equipment in the 2.4GHz range. Which of the following technologies
would most likely mitigate this issue? (Select two).
Answer: 5GHz frequency
,⩥ A systems administrator is configuring a new device to be added to
the network. The administrator is planning to perform device hardening
prior to connecting the device. Which of the following should the
administrator do first?
Answer: Change the default admin passwords
⩥ A network engineer is designing a secure communication link between
two sites. The entire data stream needs to remain confidential. Which of
the following will achieve this goal?
Answer: ESP
⩥ A company is implementing a wireless solution in a high-density
environment. Which of the following 802.11 standards is used when a
company is concerned about device saturation and converage
Answer: 802.11ax
⩥ Which of the following would be violated if an employee accidentally
deleted a customer's data?
Answer: Availibility
⩥ Which of the following is the most secure way to provide site-to-site
connectivity?
Answer: IPsec
, ⩥ Which of the following best describes the transmission format that
occurs at the transport layer over connectionless communication?
Answer: Datagram
⩥ While troubleshooting a VoIP handset connection, a technician's
laptop is able to successfully connect to network resources using the
same port. The technician needs to identify the port on the switch.
Which of the following should the technician use to determine the
switch and port?
Answer: LLDP
⩥ An administrator is configuring a switch that will be placed in an area
of the office that is accessible to customers. Which of the following is
the best way for the administrator to mitigate unknown devices from
connecting to the network?
Answer: 802.1x
⩥ A virtual machine has the following configuration: * IPv4 address:
169.254.10.10 * Subnet mask: 255.255.0.0 The virtual machine can
reach colocated systems but cannot reach external addresses on the
Internet. Which of the following Is most likely the root cause?
Answer: The DHCP server is offline
⩥ A network administrator is notified that a user cannot access resources
on the network. The network administrator checks the physical
SCRIPT 2026 FULL ANSWERS GRADED A+
⩥ A network administrator configured a router interface as 10.0.0.95
255.255.255.240. The administrator discovers that the router is not
routing packets to a web server with IP
Answer: The router interface is a broadcast address
⩥ A storage network requires reduced overhead and increased efficiency
for the amout of data being sent. Which of the following should an
engineer likely configure to meet these requirements>?
Answer: Jumbo frames
⩥ A network administrator needs to set up a multicast network for audio
and video broadcasting. Which of the following networks would be the
most appropriate for this application
Answer: 224.0.0.0/24
⩥ A network administrator notices interference with industrial
equipment in the 2.4GHz range. Which of the following technologies
would most likely mitigate this issue? (Select two).
Answer: 5GHz frequency
,⩥ A systems administrator is configuring a new device to be added to
the network. The administrator is planning to perform device hardening
prior to connecting the device. Which of the following should the
administrator do first?
Answer: Change the default admin passwords
⩥ A network engineer is designing a secure communication link between
two sites. The entire data stream needs to remain confidential. Which of
the following will achieve this goal?
Answer: ESP
⩥ A company is implementing a wireless solution in a high-density
environment. Which of the following 802.11 standards is used when a
company is concerned about device saturation and converage
Answer: 802.11ax
⩥ Which of the following would be violated if an employee accidentally
deleted a customer's data?
Answer: Availibility
⩥ Which of the following is the most secure way to provide site-to-site
connectivity?
Answer: IPsec
, ⩥ Which of the following best describes the transmission format that
occurs at the transport layer over connectionless communication?
Answer: Datagram
⩥ While troubleshooting a VoIP handset connection, a technician's
laptop is able to successfully connect to network resources using the
same port. The technician needs to identify the port on the switch.
Which of the following should the technician use to determine the
switch and port?
Answer: LLDP
⩥ An administrator is configuring a switch that will be placed in an area
of the office that is accessible to customers. Which of the following is
the best way for the administrator to mitigate unknown devices from
connecting to the network?
Answer: 802.1x
⩥ A virtual machine has the following configuration: * IPv4 address:
169.254.10.10 * Subnet mask: 255.255.0.0 The virtual machine can
reach colocated systems but cannot reach external addresses on the
Internet. Which of the following Is most likely the root cause?
Answer: The DHCP server is offline
⩥ A network administrator is notified that a user cannot access resources
on the network. The network administrator checks the physical
