NWSA TTT-2 2026/2027 ACTUAL QUESTIONS WITH VERIFIED
ANSWERS.
Carabiner - (ANSWER)A device used for lifting loads.
Hoisting grips on a 400' tower - (ANSWER)2 grips should be installed.
Ground rods required on a site - (ANSWER)3 ground rods are required.
Installation direction of ground rods for a tower - (ANSWER)Vertical with the tower.
Fire watch duration for welding - (ANSWER)2 hours.
Vehicle mounted capstan positioning - (ANSWER)As close as possible to the Signal person once the
lifting path is determined.
Device used for guy strand - (ANSWER)Guy strand tensioning.
Cantilever in rigging - (ANSWER)A device to assist the gin pole while lifting.
Non-component of a guyed tower - (ANSWER)Tapered Base.
Rigging equipment inspection frequency - (ANSWER)Daily before using.
Result of properly tightened U-bolt - (ANSWER)Both sides are tightened evenly.
Demolition method for a tower - (ANSWER)From the top section first to the bottom.
Pounds in 1 Kn - (ANSWER)250 lbs.
, NWSA TTT-2 2026/2027 ACTUAL QUESTIONS WITH VERIFIED
ANSWERS.
Cantilever definition - (ANSWER)The distance between the bridle slings and rooster head sheave.
Crane inspection requirement - (ANSWER)Inspected Daily by a competent person before use.
Government organization regulating tower lighting - (ANSWER)OSHA.
Helicopter lift protocol - (ANSWER)The competent person has the ability to be under a hovering
helicopter.
Knot effectiveness in Capstan lifting - (ANSWER)False, not all knots work equally well.
Function of bridle slings on the pole - (ANSWER)Supports the weight and the jump line and overhaul
ball.
Factor of Safety for blocks - (ANSWER)3 to 1.
Antenna type transmitting 360 degrees - (ANSWER)Omni-Directional.
Operator and signal person familiarity - (ANSWER)All of the above: Industry hang signals, Industry
standards, Vernacular used in the industry.
Factor of Safety for rigging equipment - (ANSWER)3 to 1.
Guy wire definition - (ANSWER)A strand or rope for stabilizing a structure.
Rooster head definition - (ANSWER)The block at the top of the gin pole.
ANSWERS.
Carabiner - (ANSWER)A device used for lifting loads.
Hoisting grips on a 400' tower - (ANSWER)2 grips should be installed.
Ground rods required on a site - (ANSWER)3 ground rods are required.
Installation direction of ground rods for a tower - (ANSWER)Vertical with the tower.
Fire watch duration for welding - (ANSWER)2 hours.
Vehicle mounted capstan positioning - (ANSWER)As close as possible to the Signal person once the
lifting path is determined.
Device used for guy strand - (ANSWER)Guy strand tensioning.
Cantilever in rigging - (ANSWER)A device to assist the gin pole while lifting.
Non-component of a guyed tower - (ANSWER)Tapered Base.
Rigging equipment inspection frequency - (ANSWER)Daily before using.
Result of properly tightened U-bolt - (ANSWER)Both sides are tightened evenly.
Demolition method for a tower - (ANSWER)From the top section first to the bottom.
Pounds in 1 Kn - (ANSWER)250 lbs.
, NWSA TTT-2 2026/2027 ACTUAL QUESTIONS WITH VERIFIED
ANSWERS.
Cantilever definition - (ANSWER)The distance between the bridle slings and rooster head sheave.
Crane inspection requirement - (ANSWER)Inspected Daily by a competent person before use.
Government organization regulating tower lighting - (ANSWER)OSHA.
Helicopter lift protocol - (ANSWER)The competent person has the ability to be under a hovering
helicopter.
Knot effectiveness in Capstan lifting - (ANSWER)False, not all knots work equally well.
Function of bridle slings on the pole - (ANSWER)Supports the weight and the jump line and overhaul
ball.
Factor of Safety for blocks - (ANSWER)3 to 1.
Antenna type transmitting 360 degrees - (ANSWER)Omni-Directional.
Operator and signal person familiarity - (ANSWER)All of the above: Industry hang signals, Industry
standards, Vernacular used in the industry.
Factor of Safety for rigging equipment - (ANSWER)3 to 1.
Guy wire definition - (ANSWER)A strand or rope for stabilizing a structure.
Rooster head definition - (ANSWER)The block at the top of the gin pole.
