GENERAL CRANE SAFETY CERTIFICATION
TEST BANK 2026 COMPREHENSIVE
QUESTIONS AND SOLUTIONS GRADED A+
● If a crane contacts a power line, the operator should normally stay in
the cab until power has been de-energized. Answer: A. True
● Standards for crane safety can be found in: Answer: A. 29 CFR 1926
Subpart CC
● Load charts must: Answer: B. Indicate rated lifting capacity and be
visible to operator
● Load chart ratings will differ when: Answer: D. All of the above
● Tag lines are quite hard to put into place. Answer: B. False
● Cranes must maintain a minimum of ______ feet away from power
lines: Answer: C. 10'
● For an overhead load exposure, riggers must _______, if operator
cannot. Answer: B. Sound the alarm
, ● Lattice sections cannot be added or removed on truck mounted boom
cranes. Answer: B. False
● Which type of crane is known as a "Conventional Crane": Answer: C.
Crawler
● Which of the following is NEVER true of Rough Terrain Cranes:
Answer: B. Great ability to maneuver with load
● You must assure your crane is stable by each of the following
EXCEPT: Answer: B. On-board seismograph
● Above the heavy line crossing the load chart are values for failure in:
Answer: B. Structure
● Which crane type typically has the highest combined capacity for
reach and weight: Answer: A. Crawler/conventional
● Which crane has the ability to be "jacked-up" as needed? Answer: C.
Tower
● Each of the following is true of extra pads for outriggers EXCEPT:
Answer: C. Loose timbers and plywood are recommended
TEST BANK 2026 COMPREHENSIVE
QUESTIONS AND SOLUTIONS GRADED A+
● If a crane contacts a power line, the operator should normally stay in
the cab until power has been de-energized. Answer: A. True
● Standards for crane safety can be found in: Answer: A. 29 CFR 1926
Subpart CC
● Load charts must: Answer: B. Indicate rated lifting capacity and be
visible to operator
● Load chart ratings will differ when: Answer: D. All of the above
● Tag lines are quite hard to put into place. Answer: B. False
● Cranes must maintain a minimum of ______ feet away from power
lines: Answer: C. 10'
● For an overhead load exposure, riggers must _______, if operator
cannot. Answer: B. Sound the alarm
, ● Lattice sections cannot be added or removed on truck mounted boom
cranes. Answer: B. False
● Which type of crane is known as a "Conventional Crane": Answer: C.
Crawler
● Which of the following is NEVER true of Rough Terrain Cranes:
Answer: B. Great ability to maneuver with load
● You must assure your crane is stable by each of the following
EXCEPT: Answer: B. On-board seismograph
● Above the heavy line crossing the load chart are values for failure in:
Answer: B. Structure
● Which crane type typically has the highest combined capacity for
reach and weight: Answer: A. Crawler/conventional
● Which crane has the ability to be "jacked-up" as needed? Answer: C.
Tower
● Each of the following is true of extra pads for outriggers EXCEPT:
Answer: C. Loose timbers and plywood are recommended
