S-95 ACTUAL UPDATED QUESTIONS AND CORRECT ANSWERS
S95 supervision of fire alarm systems and other related systems
Annunciator signal about a circuit, condition or location
, central station receives fire alarm signals and notifies fdny
Designated Representative A person or entity designated by the subscriber who shall be responsible for
receiving notifications from the central station company concerning the status of
the protective signaling system at the protected premises and who is authorized
to take action with respect to such system.
FIRE ALARM CONTROL UNIT receives inputs from fire alarm and supplies
power to detection devices and transponder(s) of off-premises transmitter(s).
Provides a transfer of power to notification
appliances, and transfer of condition to relays of devices.
impairment coordinator Person responsible for ensuring the proper safety precautions are taken when the
protection system is placed out of service (designated by the owner).
initiating devices originates transmission of a change-of-state condition, such as in a smoke
detector, manual fire alarm box, or supervisory switch.
nuisance alarm A fire alarm signal caused by malfunction or improper operation of a fire alarm
system or component.
plenum The open space that carries air between the ceilings and floor above.
S95 visual inspection of smoke detectors YES
S95 visual inspection of other fire alarm components YES
S95 smoke detector inspections, testing and cleaning NO
S95 smoke detector maintenance NO
S95 Program, service, clean repair fire alarms NO
THE PRIMARY PURPOSE OF FIRE ALARM SYSTEMS WARN BUILDING OCCUPANTS AND TRANSMIT SIGNALS INDICATING A FIRE
CONDITION TO THE FIRE DEPARTMENT VIA AN FDNY APPROVED CENTRAL
STATION COMPANY
Fire Alarm Control Panel (FACP) FACP is a system component that monitors inputs and control outputs through
various circuits. The primary purpose of the
fire alarm control panel is to process signals
received from initiating devices and to activate
appropriate signals and outputs.
S95 supervision of fire alarm systems and other related systems
Annunciator signal about a circuit, condition or location
, central station receives fire alarm signals and notifies fdny
Designated Representative A person or entity designated by the subscriber who shall be responsible for
receiving notifications from the central station company concerning the status of
the protective signaling system at the protected premises and who is authorized
to take action with respect to such system.
FIRE ALARM CONTROL UNIT receives inputs from fire alarm and supplies
power to detection devices and transponder(s) of off-premises transmitter(s).
Provides a transfer of power to notification
appliances, and transfer of condition to relays of devices.
impairment coordinator Person responsible for ensuring the proper safety precautions are taken when the
protection system is placed out of service (designated by the owner).
initiating devices originates transmission of a change-of-state condition, such as in a smoke
detector, manual fire alarm box, or supervisory switch.
nuisance alarm A fire alarm signal caused by malfunction or improper operation of a fire alarm
system or component.
plenum The open space that carries air between the ceilings and floor above.
S95 visual inspection of smoke detectors YES
S95 visual inspection of other fire alarm components YES
S95 smoke detector inspections, testing and cleaning NO
S95 smoke detector maintenance NO
S95 Program, service, clean repair fire alarms NO
THE PRIMARY PURPOSE OF FIRE ALARM SYSTEMS WARN BUILDING OCCUPANTS AND TRANSMIT SIGNALS INDICATING A FIRE
CONDITION TO THE FIRE DEPARTMENT VIA AN FDNY APPROVED CENTRAL
STATION COMPANY
Fire Alarm Control Panel (FACP) FACP is a system component that monitors inputs and control outputs through
various circuits. The primary purpose of the
fire alarm control panel is to process signals
received from initiating devices and to activate
appropriate signals and outputs.
