Propane test
LP-Gas Code - Answer-NFPA 58 is also known as the...
Cylinder markings and labeling - Answer-Which of the following subjects is covered in DOT regulations?
Personal Protective Equipment (PPE) - Answer-An important subject covered in OSHA regulations is?
An information bulletin that alerts you to properties and health hazards of propane - Answer-What is an
MSDS?
Oderant - Answer-________ is added to propane to increase the likelihood that a leak will be detected.
Expand - Answer-Liquid propane will __________ when heat is added to it.
80% - Answer-In order to allow for liquid expansion, propane containers are typically filled to _____% of
their capacity.
270 - Answer-Propane liquid released into the air will expand to ________ times its original volume.
Refrigerating effect - Answer-Gloves and other PPE are required when filling containers because of the
__________ of liquid propane.
An ignition source - Answer-The proper mixture of propane vapor, air and __________ is needed fir
propane to burn.
, Annually - Answer-OSHA requires employees to be trained on fire extinguisher use immediately upon
hiring and __________ thereafter.
Turned off - Answer-In an emergency where there is a propane fire, flames should not be extinguished
unless the fuel supply can be __________.
ASME storage tank - Answer-Most propane dispensers include a(n) __________ that supplies propane to
the dispensing equipment.
Operator - Answer-When filling a cylinder by volume using the fixed maximum liquid level gage, the
filling process relies on the __________ to determine when the maximum permitted filling limit for a
cylinder is reached.
Remote shutdown stations - Answer-Which of the following is used to provide an additional level of
emergency shutdown capability?
Certification decals - Answer-Platform balance beam scales must bear __________
Shut down and secured - Answer-When the operator is not in attendance, the dispenser should be
__________
A break-away device - Answer-When filling mobile propane containers that are permanently mounted
on vehicles or RV's, dispensing equipment
Remain away from the immediate filling area - Answer-Because of the inherent dangers when filling
propanevcontainers, customers should be asked to __________
Footring - Answer-The __________ is a wide metal band welded or brazed to the bottom of the cylinder
body from corrosion or damage.
LP-Gas Code - Answer-NFPA 58 is also known as the...
Cylinder markings and labeling - Answer-Which of the following subjects is covered in DOT regulations?
Personal Protective Equipment (PPE) - Answer-An important subject covered in OSHA regulations is?
An information bulletin that alerts you to properties and health hazards of propane - Answer-What is an
MSDS?
Oderant - Answer-________ is added to propane to increase the likelihood that a leak will be detected.
Expand - Answer-Liquid propane will __________ when heat is added to it.
80% - Answer-In order to allow for liquid expansion, propane containers are typically filled to _____% of
their capacity.
270 - Answer-Propane liquid released into the air will expand to ________ times its original volume.
Refrigerating effect - Answer-Gloves and other PPE are required when filling containers because of the
__________ of liquid propane.
An ignition source - Answer-The proper mixture of propane vapor, air and __________ is needed fir
propane to burn.
, Annually - Answer-OSHA requires employees to be trained on fire extinguisher use immediately upon
hiring and __________ thereafter.
Turned off - Answer-In an emergency where there is a propane fire, flames should not be extinguished
unless the fuel supply can be __________.
ASME storage tank - Answer-Most propane dispensers include a(n) __________ that supplies propane to
the dispensing equipment.
Operator - Answer-When filling a cylinder by volume using the fixed maximum liquid level gage, the
filling process relies on the __________ to determine when the maximum permitted filling limit for a
cylinder is reached.
Remote shutdown stations - Answer-Which of the following is used to provide an additional level of
emergency shutdown capability?
Certification decals - Answer-Platform balance beam scales must bear __________
Shut down and secured - Answer-When the operator is not in attendance, the dispenser should be
__________
A break-away device - Answer-When filling mobile propane containers that are permanently mounted
on vehicles or RV's, dispensing equipment
Remain away from the immediate filling area - Answer-Because of the inherent dangers when filling
propanevcontainers, customers should be asked to __________
Footring - Answer-The __________ is a wide metal band welded or brazed to the bottom of the cylinder
body from corrosion or damage.
