NWSA TTT-1 Exam ACTUAL QUESTIONS AND
DETAILED SOLUTIONS LATEST UPDATE THIS
YEAR.pdf(2026/2027)!!!!
Carabiner - ANSWER-A device used for lifting loads.
Hoisting grips on a 400' tower - ANSWER-2 grips should
be installed.
Ground rods required on a site - ANSWER-3 ground rods
are required.
,Installation direction of ground rods for a tower -
ANSWER-Vertical with the tower.
Fire watch duration for welding - ANSWER-2 hours.
Vehicle mounted capstan positioning - ANSWER-As close
as possible to the Signal person once the lifting path is
determined.
Device used for guy strand - ANSWER-Guy strand
tensioning.
Cantilever in rigging - ANSWER-A device to assist the gin
pole while lifting.
,Non-component of a guyed tower - ANSWER-Tapered
Base.
Rigging equipment inspection frequency - ANSWER-Daily
before using.
Result of properly tightened U-bolt - ANSWER-Both sides
are tightened evenly.
Demolition method for a tower - ANSWER-From the top
section first to the bottom.
Pounds in 1 Kn - ANSWER-250 lbs.
, Cantilever definition - ANSWER-The distance between the
bridle slings and rooster head sheave.
Crane inspection requirement - ANSWER-Inspected Daily
by a competent person before use.
Government organization regulating tower lighting -
ANSWER-OSHA.
Helicopter lift protocol - ANSWER-The competent person
has the ability to be under a hovering helicopter.
DETAILED SOLUTIONS LATEST UPDATE THIS
YEAR.pdf(2026/2027)!!!!
Carabiner - ANSWER-A device used for lifting loads.
Hoisting grips on a 400' tower - ANSWER-2 grips should
be installed.
Ground rods required on a site - ANSWER-3 ground rods
are required.
,Installation direction of ground rods for a tower -
ANSWER-Vertical with the tower.
Fire watch duration for welding - ANSWER-2 hours.
Vehicle mounted capstan positioning - ANSWER-As close
as possible to the Signal person once the lifting path is
determined.
Device used for guy strand - ANSWER-Guy strand
tensioning.
Cantilever in rigging - ANSWER-A device to assist the gin
pole while lifting.
,Non-component of a guyed tower - ANSWER-Tapered
Base.
Rigging equipment inspection frequency - ANSWER-Daily
before using.
Result of properly tightened U-bolt - ANSWER-Both sides
are tightened evenly.
Demolition method for a tower - ANSWER-From the top
section first to the bottom.
Pounds in 1 Kn - ANSWER-250 lbs.
, Cantilever definition - ANSWER-The distance between the
bridle slings and rooster head sheave.
Crane inspection requirement - ANSWER-Inspected Daily
by a competent person before use.
Government organization regulating tower lighting -
ANSWER-OSHA.
Helicopter lift protocol - ANSWER-The competent person
has the ability to be under a hovering helicopter.
