Manual Transmission/Transaxle Principles Final Exam UPDATED ACTUAL Questions and CORRECT Answers!!2026/2027

Manual Transmission/Transaxle Principles Final Exam

UPDATED ACTUAL Questions and CORRECT

Answers!!2026/2027




tf clutch slippage occurs when the clutch disc is not

gripped firmly between the flywheel and the pressure plate

- ANSWER-t




tf clutch drag occurs if the clutch disc is not completely

released when the clutch pedal is fully depressed -

ANSWER-t

,tf there is approzimately 10psi residual pressure in

hydraulic clutch lines when the clutch is in the engaged

position - ANSWER-f




tf when the clutch is fully engaged the release bearing is

normally stationarry - ANSWER-t




tf two meshed external cut gears turn in opposite rotations

- ANSWER-t




tf a shift rail and fork is used to control the movement of a

synchronizer - ANSWER-t

tf chatter is caused by liquid contaminants on the friction

surfaces - ANSWER-t

, tf a plugged transmission vent may cause a seal to leak -

ANSWER-t




tf a manual trann/axle internal shift linkage should be

adjusted if a shift linkage problem is identified - ANSWER-

false




tf if one gear tooth is a countergear assembly is broken,

the entire assembly must be replaced - ANSWER-t




tf on some cars the engine and tranny must be removed

as a unit - ANSWER-t