TEXAS STATE INSPECTOR SAFETY CERT. EXAM
WITH CORRECT ACTUAL QUESTIONS AND
CORRECTLY WELL DEFINED ANSWERS LATEST
ALREADY GRADED A+ 2026/2027!!!
One of the required procedures in the inspection of the
steering is: - ANSWER-Turning the steering wheel from full
left to full right
Conventional brakes or non-power brakes must have a
minimum pedal reserve of: - ANSWER-2 inch
, Any tire with wear bar indicators would be rejected for the
following reason: - ANSWER-Tread wear indicators
contact the road on any two adjacent major grooves in the
center of the middle of the tire
LED tail lamps may have no more than ______ of diodes
malfunctioning to pass inspection. - ANSWER-50%
When performing a road test on the service brakes, a
truck weighing over 10,000 lbs GVW (this would include
larger trucks but not truck-trailer combinations) should be
driven at a speed of 20 mph and should stop within: -
ANSWER-40 feet
WITH CORRECT ACTUAL QUESTIONS AND
CORRECTLY WELL DEFINED ANSWERS LATEST
ALREADY GRADED A+ 2026/2027!!!
One of the required procedures in the inspection of the
steering is: - ANSWER-Turning the steering wheel from full
left to full right
Conventional brakes or non-power brakes must have a
minimum pedal reserve of: - ANSWER-2 inch
, Any tire with wear bar indicators would be rejected for the
following reason: - ANSWER-Tread wear indicators
contact the road on any two adjacent major grooves in the
center of the middle of the tire
LED tail lamps may have no more than ______ of diodes
malfunctioning to pass inspection. - ANSWER-50%
When performing a road test on the service brakes, a
truck weighing over 10,000 lbs GVW (this would include
larger trucks but not truck-trailer combinations) should be
driven at a speed of 20 mph and should stop within: -
ANSWER-40 feet
