AND PROCEDURES FOR WATER SYSTEMS
What is a direct cross-connection subject to?
Both backsiphonage and backpressure.
What must check valves be in terms of loading?
Internally loaded and must be drip-tight in the reverse
direction of flow with a minimum of 1 psi differential.
What is an Approved Air Gap?
A physical separation between the free-flowing end of
a potable water supply pipeline and the overflow rim
of an open or non-pressurized receiving vessel.
What is Backflow?
The undesirable reversal of flow of water or other
substances through a cross-connection into the public
water system or consumer's potable water system.
, What is Service Protection?
A method of protecting the public water system from
contamination due to backflow from the customer's
water system by the installation of an approved
backflow assembly at the service connection.
What does Static Water Pressure mean?
Water that is at rest and is not flowing in a pipe.
What pressure does a column of water 12 inches high
exert at the base?
0.433 psi.
What causes pressure at the bottom of a water column?
The weight of the water in the column.
Where is the pressure in an approved backflow
prevention assembly reduced?
Downstream of a loaded check valve.