ELECTRICAL SYSTEMS 1 SACA CERTIFICATION
FINAL PAPER 2026 SOLVED QUESTIONS AND
FULL SOLUTION UPDATED
◉ Hazard assessment.
Answer: The process of identifying potential hazards in the
workplace is known as a __________.
◉ TRUE.
Answer: An injury is defined as physical harm to the body that
happens as a result of exposure to some form of energy that exceeds
the body's tolerance. Is this statement TRUE or FALSE?
◉ Shut down their machines and leave the building.
Answer: In the event of an evacuation alarm, employees should
__________.
◉ 15.
Answer: After exposure to most chemicals the eyes should be
flushed continuously for __________ minutes.
◉ Thickeners.
,Answer: Grease is made from a liquid lubricant with what added to
it to make it semi-solid?
◉ Pictograms.
Answer: What does the GHS hazardous material classification
systems use to identify the danger of a material?
◉ 16.
Answer: Every Safety Data Sheet must follow the same format that
has __________ sections.
◉ SDS.
Answer: Safe handling procedures of chemicals are found in the
__________.
◉ First in, first out.
Answer: __________ is a system that rotates chemical stock to ensure
they are used within their shelf life.
◉ Explosive.
Answer: An orange DOT label indicates the material is __________.
◉ DOT Hazardous Materials Table.
, Answer: Before shipping a hazardous material, review the __________,
which provides directions for packaging, labels, UN ID, and required
paperwork for shipment.
◉ Educating employees on fire hazards and prevention.
Answer: The first step in fire and electrical safety is __________.
◉ 35 feet (10.6 meters).
Answer: When welding, keep combustible material at least __________
away from the area.
◉ Monthly.
Answer: OSHA requires __________ inspections of fire extinguishers.
◉ Standard operating procedure.
Answer: A safe work place begins by designing in safety by creating
a(n) __________.
◉ 4 feet (1.2 meters).
Answer: OSHA requires elevated work surfaces to have guards if the
surface is __________ above ground.
◉ Repetitive motion injuries.
FINAL PAPER 2026 SOLVED QUESTIONS AND
FULL SOLUTION UPDATED
◉ Hazard assessment.
Answer: The process of identifying potential hazards in the
workplace is known as a __________.
◉ TRUE.
Answer: An injury is defined as physical harm to the body that
happens as a result of exposure to some form of energy that exceeds
the body's tolerance. Is this statement TRUE or FALSE?
◉ Shut down their machines and leave the building.
Answer: In the event of an evacuation alarm, employees should
__________.
◉ 15.
Answer: After exposure to most chemicals the eyes should be
flushed continuously for __________ minutes.
◉ Thickeners.
,Answer: Grease is made from a liquid lubricant with what added to
it to make it semi-solid?
◉ Pictograms.
Answer: What does the GHS hazardous material classification
systems use to identify the danger of a material?
◉ 16.
Answer: Every Safety Data Sheet must follow the same format that
has __________ sections.
◉ SDS.
Answer: Safe handling procedures of chemicals are found in the
__________.
◉ First in, first out.
Answer: __________ is a system that rotates chemical stock to ensure
they are used within their shelf life.
◉ Explosive.
Answer: An orange DOT label indicates the material is __________.
◉ DOT Hazardous Materials Table.
, Answer: Before shipping a hazardous material, review the __________,
which provides directions for packaging, labels, UN ID, and required
paperwork for shipment.
◉ Educating employees on fire hazards and prevention.
Answer: The first step in fire and electrical safety is __________.
◉ 35 feet (10.6 meters).
Answer: When welding, keep combustible material at least __________
away from the area.
◉ Monthly.
Answer: OSHA requires __________ inspections of fire extinguishers.
◉ Standard operating procedure.
Answer: A safe work place begins by designing in safety by creating
a(n) __________.
◉ 4 feet (1.2 meters).
Answer: OSHA requires elevated work surfaces to have guards if the
surface is __________ above ground.
◉ Repetitive motion injuries.
