NTN FIRETEAM STUDY SET STUDY GUIDE
EXAM WITH 100% VERIFIED QUESTIONS AND
ANSWERS FULLY SOLVED & UPDATED 2026
(GRADE A+) | LATEST!!
What do you use to tighten a bolt - answer-socket wrench
What shape is a drillbit used for metal - answer-sleek shape, not pointed, no pertruding
edges for operations at high speed to go through hard metal or sometimes wood
what shape drillbit is hand operated for drilling wood - answer-the tip is a threaded
point, pertruding edges to cut through soft wood.
what shape drillbit is used from ceramics/masonry - answer-squared off tip bit
small gear vs big gear, what turns faster? - answer-Big gear
When installing Bolt w/ washer and nut, what side faces you? - answer-Threaded end
goes away from body to prevent hazard
What tool is used to cut bolts? - answer-Hacksaw (NOT BOLTCUTTERS)
Mechanical Brick Factory: What do you do if there is unmelted material? - answer-Stop,
call mechanic
Mechanical Brick Factory: If you want more material from the start of the assembly,
what do you do? - answer-Adjust amount released by Hopper, DONT adjust speed of
belt
, Mechanical Brick Factory: If the first grinder is stuck, what do you suspect? - answer-
There is a jam in the grinder
Mechanical Brick Factory: How do you fix a grinder jam? - answer-You put it in reverse
manually
Mechanical Brick Factory: How do you remove a molding station arm? - answer-1.
Loosen middle nut
2. then remove end nut
Mechanical Brick Factory: If water is pouring over the edge, what do you suspect is
wrong? - answer-Green Filter CLOG
Mechanical Brick Factory: Water tank is rising quickly, how do you fix it? - answer-
Reduce amount of fresh water
Mechanical Brick Factory: What purpose does the shake motion have on the washing
tray? - answer-Shaking spins material to ensure all sides of material get washed
Mechanical Brick Factory: If there is a Gear valve that needs to be turned on and off,
what way do you turn it? - answer-righty - closee (CW)
lefty - open (CCW)
Mechanical Brick Factory: What is the purpose of a gasket/washer - answer-distributes
pressure, reduce chance of loosening, seals opening
Mechanical electrical question: what happens in a CIRCUIT when you turn on a light
switch to turn lights on? - answer-Switched ON means the circuit closes, which routes
power to its purpose.
Switched off means the circuit is open, meaning no route for electricity to travel.
EXAM WITH 100% VERIFIED QUESTIONS AND
ANSWERS FULLY SOLVED & UPDATED 2026
(GRADE A+) | LATEST!!
What do you use to tighten a bolt - answer-socket wrench
What shape is a drillbit used for metal - answer-sleek shape, not pointed, no pertruding
edges for operations at high speed to go through hard metal or sometimes wood
what shape drillbit is hand operated for drilling wood - answer-the tip is a threaded
point, pertruding edges to cut through soft wood.
what shape drillbit is used from ceramics/masonry - answer-squared off tip bit
small gear vs big gear, what turns faster? - answer-Big gear
When installing Bolt w/ washer and nut, what side faces you? - answer-Threaded end
goes away from body to prevent hazard
What tool is used to cut bolts? - answer-Hacksaw (NOT BOLTCUTTERS)
Mechanical Brick Factory: What do you do if there is unmelted material? - answer-Stop,
call mechanic
Mechanical Brick Factory: If you want more material from the start of the assembly,
what do you do? - answer-Adjust amount released by Hopper, DONT adjust speed of
belt
, Mechanical Brick Factory: If the first grinder is stuck, what do you suspect? - answer-
There is a jam in the grinder
Mechanical Brick Factory: How do you fix a grinder jam? - answer-You put it in reverse
manually
Mechanical Brick Factory: How do you remove a molding station arm? - answer-1.
Loosen middle nut
2. then remove end nut
Mechanical Brick Factory: If water is pouring over the edge, what do you suspect is
wrong? - answer-Green Filter CLOG
Mechanical Brick Factory: Water tank is rising quickly, how do you fix it? - answer-
Reduce amount of fresh water
Mechanical Brick Factory: What purpose does the shake motion have on the washing
tray? - answer-Shaking spins material to ensure all sides of material get washed
Mechanical Brick Factory: If there is a Gear valve that needs to be turned on and off,
what way do you turn it? - answer-righty - closee (CW)
lefty - open (CCW)
Mechanical Brick Factory: What is the purpose of a gasket/washer - answer-distributes
pressure, reduce chance of loosening, seals opening
Mechanical electrical question: what happens in a CIRCUIT when you turn on a light
switch to turn lights on? - answer-Switched ON means the circuit closes, which routes
power to its purpose.
Switched off means the circuit is open, meaning no route for electricity to travel.
