NFPA 10 FINAL EXAM || MOST RECENT EXAM
2026-2027 ACTUAL COMPLETE REAL EXAM
QUESTIONS AND CORRECT ANSWERS (VERIFIED
ANSWERS) ALREADY GRADED A+ |
GUARANTEED SUCCESS!! JUST RELEASED |
BRAND NEW!!
What Class extinguishers are required to have a rating number
preceding the
classification letter that indicates the relative extinguishing
effectiveness -
ANSWER-Class A
or B
Class C, D, and K extinguishers are not required to have
what? - ANSWER-
number preceding the
classification letter
The use of a halogenated fire extinguisher shall be limited to
applications where a ______ _______ is necessary to
extinguish effectively without damaging the equipment OR
where the use of alternative agents have the potential to cause
a hazard to ________ - ANSWER-clean agent personnel
Placement of portable fire extinguishers containing
halogenated agents should conform to ________ _______
,_______ warnings contained on the extinguisher nameplate. -
ANSWER-Minimum confined space volume
Fire extinguishers are provided to protect what two things -
ANSWER-Building
structure and occupancy
hazards
Most buildings have class _____ hazards - ANSWER-A
Extinguishers provided for building protection shall also be
considered for the
protection of occupancies having a Class _____ fire -
ANSWER-A
Extinguishers with more than one letter classification are
permitted to satisfy the
requirements of ______ letter class -
ANSWER-each
Three dimensional Class B fires involve-pouring, running or
dripping _______
________ - ANSWER-flammable
liquids
What is the required minimum discharge rate for a large
capacity dry chemical
extinguisher 10lb or greater used to protect a 3d fire? -
ANSWER-1lb/sec
, How does NFPA 10 define :flammable liquids of
appreciable depth? -
ANSWER-Depth greater than
1/4 in
Production of Halon 1211 and Halon 1301 ceased in what
year - ANSWER-
1994
What is hydrostatic testing - ANSWER-Pressure testing of the
extinguisher to
verify its strength against
unwanted rupture.
A water-based extinguishing agent that uses and alike metal
salt to prevent
freezing is called what? - ANSWER-Loaded
stream charge
The normal operating pressure as indicated on the nameplate
or cylinder of a
fire extinguisher is known as the - ANSWER-Extinguisher
service pressure
The pressure shown on the nameplate at which a shell was
tested at time of
manufacture is known as the - ANSWER-Factory
test pressure
2026-2027 ACTUAL COMPLETE REAL EXAM
QUESTIONS AND CORRECT ANSWERS (VERIFIED
ANSWERS) ALREADY GRADED A+ |
GUARANTEED SUCCESS!! JUST RELEASED |
BRAND NEW!!
What Class extinguishers are required to have a rating number
preceding the
classification letter that indicates the relative extinguishing
effectiveness -
ANSWER-Class A
or B
Class C, D, and K extinguishers are not required to have
what? - ANSWER-
number preceding the
classification letter
The use of a halogenated fire extinguisher shall be limited to
applications where a ______ _______ is necessary to
extinguish effectively without damaging the equipment OR
where the use of alternative agents have the potential to cause
a hazard to ________ - ANSWER-clean agent personnel
Placement of portable fire extinguishers containing
halogenated agents should conform to ________ _______
,_______ warnings contained on the extinguisher nameplate. -
ANSWER-Minimum confined space volume
Fire extinguishers are provided to protect what two things -
ANSWER-Building
structure and occupancy
hazards
Most buildings have class _____ hazards - ANSWER-A
Extinguishers provided for building protection shall also be
considered for the
protection of occupancies having a Class _____ fire -
ANSWER-A
Extinguishers with more than one letter classification are
permitted to satisfy the
requirements of ______ letter class -
ANSWER-each
Three dimensional Class B fires involve-pouring, running or
dripping _______
________ - ANSWER-flammable
liquids
What is the required minimum discharge rate for a large
capacity dry chemical
extinguisher 10lb or greater used to protect a 3d fire? -
ANSWER-1lb/sec
, How does NFPA 10 define :flammable liquids of
appreciable depth? -
ANSWER-Depth greater than
1/4 in
Production of Halon 1211 and Halon 1301 ceased in what
year - ANSWER-
1994
What is hydrostatic testing - ANSWER-Pressure testing of the
extinguisher to
verify its strength against
unwanted rupture.
A water-based extinguishing agent that uses and alike metal
salt to prevent
freezing is called what? - ANSWER-Loaded
stream charge
The normal operating pressure as indicated on the nameplate
or cylinder of a
fire extinguisher is known as the - ANSWER-Extinguisher
service pressure
The pressure shown on the nameplate at which a shell was
tested at time of
manufacture is known as the - ANSWER-Factory
test pressure
