Science Engineering Civil Engineering
Nicet Highway Construction Level 1 and 2
NICET Highway Construction Level 1
& 2 | 100% Verified Answers | Pass
Exam Guide 2026
3 Types of Blueprint Views 1. Plan View 2. Elevation or Profile View 3. Cross-Section View
What is Plan View? View from above
What is the profile view? View from the front or the side
What is the cross-section view? A view as if the object has been cut open
What is the first sheet in a set of project plans? Title or key sheet
What do typical section sheets show? They show the different layers of the road and side slopes and ditches for a
particular given length.
What is a plan detail? A detail is a view of a very specific item of work
T/F Typical Section Sheets show elevation views of the False. The answer is "Profile Sheets"
proposed road.
The shape of the road's side slopes and ditches are found "Typical Section Sheets"
on which sheet?
T/F The directional arrow is found on the "Profile Sheet" False. "Plan Sheets" also called "Key Sheet"
,Which sheet depicts the cross-section view of the road Cross-Section sheets.
superimposed on the natural ground line?
What is the diameter, in inches, of a #8, Re-Bar? 8 divided by 8 = 1.00"
Station 21+00 is what distance from Station 23+00? 200
Is 21+00 Up Station or Back Station from 23+00? Back Station
What is "Cross-Slope"? Cross-slope is defined as the transverse slope with respect to the horizon
What is surveying? the profession or work of examining and recording the area and features of a
piece of land so as to construct a map, plan, or detailed description of it
What is Geodectic Surveying? It is that type of surveying in which the curved shape of earth is taken into
account.
What is a level in surveying used for? A level is a telescope instrument used to set slope stakes, check the level of forms
or field elevations / grades.
What is the difference between a Transit vs a Level / A Transit can be tilted vertically to measure vertical angles.
Laser?
What is a "Plumb Bob"? A "Plumb Bob" is a weighted object connected to a string that can be used to
establish a vertical line. It is used to calculate horizontal distances over sloping
ground in conjunction with a surveying tape.
What is a "Survey Rod"? A survey rod reads like a tape measure. It allows the surveyor to record an
observed number so that an elevation can be determined.
What is a Vernier? A "Vernier" is used on a survey rod and is used to determine the subdivision of the
smallest division of the smallest division of a scale.
Can the terms "Transit" and "Level" be used No. A Transit can measure vertical angles whereas a level cannot.
synonymously?
When looking through a level, what are the 4 different Upper Stadia, Middle Cross / Middle Stadia, Lower Stadia and Vertical Cross.
hair lines that you will see called?
What are Benchmarks? Benchmarks are fixed exact points where an exact elevation is know.
What is "Back Sight"? Back Sight is a rod reading taken on a point of know elevation.
What is "Height of Instrumentation" (HI) is the elevation of the line of sight projected by the instrument.
What is "Fore Sight" (FS)? Foresight is a rod reading taken on any point to determine it's elevation.
What is "Turning Point" (TP)? Turning Point is a reliable point upon which a foresight is taken to establish
elevation.
, A steel tape is used to measure the length between The measurement will be too long. The tape shrunk due to the cold and principles
points "A" & "B" and the distance is found to be 95'. The of "Coefficient of Expansion".
temperature of the tape at the time of measurement is 45
degrees (F). If the tape is calibrated for 68 degrees (F)
and no other factors are to be considered, is the
measurement correct? Short or long? Why?
What is the typical tension required on a 100' steel tape? 25 LBS
If a steel tape is held "off-line", is the measurement No. When measuring, tapes must be held on-line, if not, errors will occur in the
accurate? actual measurement.
Name the 9 most common errors that occur when Length other than standard, improper plumbing, temperature other than standard,
measuring with tapes. poor alignment, tape not being horizontal (level), sagging, faulty marking,
incorrect reading or interpolation.
What are Catch Points? CP occur at the intersection of the existing ground and the constructed grade.
The amount of cut or fill is determined by the difference between the roadway
elevation and the original ground elevation.
Name the 3 types of Contour Lines. Index, Intermediate and Supplementary.
What is the definition of Contour Lines? A Contour Line connects all points of equal elevation, above or below a known or
assumed reference point or plane.
How is a depression shown on a Topo Map? Hachure or tick marks that are on the inside of contour circles denote a
depression.
What are the "4 Rules" of Contour Lines? 1. All points along the same contour line are on the same elevation. 2. All contour
lines eventually connect. 3. Contour lines never cross each other. 4. Contour lines
never split
What instrument is used to determine the area of a Topo Plainmeter
Map?
The farther contour lines are apart, the _________ the Flatter or less.
slope.
T or F? When determining elevation of an Intermediate False. Start at the closest Index Contour.
Contour line always start at the furthest Index Contour
line.
Define "Benchmark". A Benchmark is a fixed exact point where an exact elevation is known.
T/F? Slope & drainage is always calculated parallel to the False. Perpendicular.
contour lines.
In soil testing, the test used to determine the ratio of the Density Check
weight of a given volume of material to the weight of an
equal volume water is known as?
Nicet Highway Construction Level 1 and 2
NICET Highway Construction Level 1
& 2 | 100% Verified Answers | Pass
Exam Guide 2026
3 Types of Blueprint Views 1. Plan View 2. Elevation or Profile View 3. Cross-Section View
What is Plan View? View from above
What is the profile view? View from the front or the side
What is the cross-section view? A view as if the object has been cut open
What is the first sheet in a set of project plans? Title or key sheet
What do typical section sheets show? They show the different layers of the road and side slopes and ditches for a
particular given length.
What is a plan detail? A detail is a view of a very specific item of work
T/F Typical Section Sheets show elevation views of the False. The answer is "Profile Sheets"
proposed road.
The shape of the road's side slopes and ditches are found "Typical Section Sheets"
on which sheet?
T/F The directional arrow is found on the "Profile Sheet" False. "Plan Sheets" also called "Key Sheet"
,Which sheet depicts the cross-section view of the road Cross-Section sheets.
superimposed on the natural ground line?
What is the diameter, in inches, of a #8, Re-Bar? 8 divided by 8 = 1.00"
Station 21+00 is what distance from Station 23+00? 200
Is 21+00 Up Station or Back Station from 23+00? Back Station
What is "Cross-Slope"? Cross-slope is defined as the transverse slope with respect to the horizon
What is surveying? the profession or work of examining and recording the area and features of a
piece of land so as to construct a map, plan, or detailed description of it
What is Geodectic Surveying? It is that type of surveying in which the curved shape of earth is taken into
account.
What is a level in surveying used for? A level is a telescope instrument used to set slope stakes, check the level of forms
or field elevations / grades.
What is the difference between a Transit vs a Level / A Transit can be tilted vertically to measure vertical angles.
Laser?
What is a "Plumb Bob"? A "Plumb Bob" is a weighted object connected to a string that can be used to
establish a vertical line. It is used to calculate horizontal distances over sloping
ground in conjunction with a surveying tape.
What is a "Survey Rod"? A survey rod reads like a tape measure. It allows the surveyor to record an
observed number so that an elevation can be determined.
What is a Vernier? A "Vernier" is used on a survey rod and is used to determine the subdivision of the
smallest division of the smallest division of a scale.
Can the terms "Transit" and "Level" be used No. A Transit can measure vertical angles whereas a level cannot.
synonymously?
When looking through a level, what are the 4 different Upper Stadia, Middle Cross / Middle Stadia, Lower Stadia and Vertical Cross.
hair lines that you will see called?
What are Benchmarks? Benchmarks are fixed exact points where an exact elevation is know.
What is "Back Sight"? Back Sight is a rod reading taken on a point of know elevation.
What is "Height of Instrumentation" (HI) is the elevation of the line of sight projected by the instrument.
What is "Fore Sight" (FS)? Foresight is a rod reading taken on any point to determine it's elevation.
What is "Turning Point" (TP)? Turning Point is a reliable point upon which a foresight is taken to establish
elevation.
, A steel tape is used to measure the length between The measurement will be too long. The tape shrunk due to the cold and principles
points "A" & "B" and the distance is found to be 95'. The of "Coefficient of Expansion".
temperature of the tape at the time of measurement is 45
degrees (F). If the tape is calibrated for 68 degrees (F)
and no other factors are to be considered, is the
measurement correct? Short or long? Why?
What is the typical tension required on a 100' steel tape? 25 LBS
If a steel tape is held "off-line", is the measurement No. When measuring, tapes must be held on-line, if not, errors will occur in the
accurate? actual measurement.
Name the 9 most common errors that occur when Length other than standard, improper plumbing, temperature other than standard,
measuring with tapes. poor alignment, tape not being horizontal (level), sagging, faulty marking,
incorrect reading or interpolation.
What are Catch Points? CP occur at the intersection of the existing ground and the constructed grade.
The amount of cut or fill is determined by the difference between the roadway
elevation and the original ground elevation.
Name the 3 types of Contour Lines. Index, Intermediate and Supplementary.
What is the definition of Contour Lines? A Contour Line connects all points of equal elevation, above or below a known or
assumed reference point or plane.
How is a depression shown on a Topo Map? Hachure or tick marks that are on the inside of contour circles denote a
depression.
What are the "4 Rules" of Contour Lines? 1. All points along the same contour line are on the same elevation. 2. All contour
lines eventually connect. 3. Contour lines never cross each other. 4. Contour lines
never split
What instrument is used to determine the area of a Topo Plainmeter
Map?
The farther contour lines are apart, the _________ the Flatter or less.
slope.
T or F? When determining elevation of an Intermediate False. Start at the closest Index Contour.
Contour line always start at the furthest Index Contour
line.
Define "Benchmark". A Benchmark is a fixed exact point where an exact elevation is known.
T/F? Slope & drainage is always calculated parallel to the False. Perpendicular.
contour lines.
In soil testing, the test used to determine the ratio of the Density Check
weight of a given volume of material to the weight of an
equal volume water is known as?
