Nccer Core Introduction to Basic Construction Skills Sixth
Edition Latest Exam Questions and Answers 100% PASS
1. Companies with strong safety cultures usually have lower _____. - CORRECT ANSWER
turnover
2. Which of these is a true statement regarding safety? - CORRECT ANSWER Safety is a
learned behavior and attitude.
3. Poor lighting, excessive noise, and inadequate guards for moving parts are examples of _____.
- CORRECT ANSWER unsafe conditions
4. The activity that consists of breaking a job into its component tasks and then analyzing each
step for potential hazards is called a _____. - CORRECT ANSWER job safety analysis
5. A measure of the probability, consequences, and exposure related to an event is referred to as
_____. - CORRECT ANSWER Risk
6. If there is a hole in the floor of a structure, the preferred method of protecting workers from
falls is to _____. - CORRECT ANSWER cover the opening and label the cover
,7. The D-ring or support point on a safety harness should be placed _____. - CORRECT
ANSWER between the shoulder blades
8. A personal fall arrest system should be inspected monthly by a _____. - CORRECT
ANSWER competent person
9. Lanyards that have no shock-absorbing features are used for _____. - CORRECT ANSWER
Positioning
10. When placing a ladder against a platform or roof, the top of the ladder should extend above
the point where the ladder touches the platform or roof by at least _____. - CORRECT
ANSWER 3 feet (91 cm)
11. When performing overhead work on scaffolding, what protective measures must be taken to
prevent objects from falling and striking a person below? - CORRECT ANSWER Toeboards,
debris nets, or canopies must be applied.
12. When stacking materials such as bricks or block, do not stack materials beyond a _____. -
CORRECT ANSWER 4:1 height-to-base ratio
13. Benching systems are prohibited in _____. - CORRECT ANSWER Type C soils
14. In the absence of other information, all soil in an excavation should be treated as if it is
_____. - CORRECT ANSWER Type C
15. Daily inspection of an excavation must be performed by a(n) _____. - CORRECT
ANSWER competent person
16. One of the most common grounding systems used for protection against accidental electrical
shock is the _____. - CORRECT ANSWER three-wire system
, 17. A polarized electrical receptacle is used for _____. - CORRECT ANSWER double-
insulated tools
18. A system that protects workers from the release of hazardous energy while they work with
machines and equipment is referred to as _____. - CORRECT ANSWER lockout/ tagout
19. In a lockout/ tagout situation, a personal lock and tag must be removed by _____. -
CORRECT ANSWER the person who applied them
20. Hard hats should be made of fiberglass or _____. - CORRECT ANSWER reinforced
plastic
21. A good general rule about hearing protection is that it should be used if you must raise your
voice for someone to hear you when they are _____. - CORRECT ANSWER 2 feet (61 cm)
away
22. When there is the potential to be exposed to asbestos, workers must _____. - CORRECT
ANSWER report it to a supervisor and avoid disturbing it
23. The respirator that would be used where dust or solid particles might be inhaled is a _____. -
CORRECT ANSWER half mask or mouthpiece with a mechanical filter
24. One source of lead on some job sites is _____. - CORRECT ANSWER paint
25. Hepatitis can be caused by contact with _____. - CORRECT ANSWER Blood
26. One of the symptoms of heat stroke is _____. - CORRECT ANSWER extremely high body
temperature
27. Which of the following conditions is considered life threatening? - CORRECT ANSWER
Heat stroke
Edition Latest Exam Questions and Answers 100% PASS
1. Companies with strong safety cultures usually have lower _____. - CORRECT ANSWER
turnover
2. Which of these is a true statement regarding safety? - CORRECT ANSWER Safety is a
learned behavior and attitude.
3. Poor lighting, excessive noise, and inadequate guards for moving parts are examples of _____.
- CORRECT ANSWER unsafe conditions
4. The activity that consists of breaking a job into its component tasks and then analyzing each
step for potential hazards is called a _____. - CORRECT ANSWER job safety analysis
5. A measure of the probability, consequences, and exposure related to an event is referred to as
_____. - CORRECT ANSWER Risk
6. If there is a hole in the floor of a structure, the preferred method of protecting workers from
falls is to _____. - CORRECT ANSWER cover the opening and label the cover
,7. The D-ring or support point on a safety harness should be placed _____. - CORRECT
ANSWER between the shoulder blades
8. A personal fall arrest system should be inspected monthly by a _____. - CORRECT
ANSWER competent person
9. Lanyards that have no shock-absorbing features are used for _____. - CORRECT ANSWER
Positioning
10. When placing a ladder against a platform or roof, the top of the ladder should extend above
the point where the ladder touches the platform or roof by at least _____. - CORRECT
ANSWER 3 feet (91 cm)
11. When performing overhead work on scaffolding, what protective measures must be taken to
prevent objects from falling and striking a person below? - CORRECT ANSWER Toeboards,
debris nets, or canopies must be applied.
12. When stacking materials such as bricks or block, do not stack materials beyond a _____. -
CORRECT ANSWER 4:1 height-to-base ratio
13. Benching systems are prohibited in _____. - CORRECT ANSWER Type C soils
14. In the absence of other information, all soil in an excavation should be treated as if it is
_____. - CORRECT ANSWER Type C
15. Daily inspection of an excavation must be performed by a(n) _____. - CORRECT
ANSWER competent person
16. One of the most common grounding systems used for protection against accidental electrical
shock is the _____. - CORRECT ANSWER three-wire system
, 17. A polarized electrical receptacle is used for _____. - CORRECT ANSWER double-
insulated tools
18. A system that protects workers from the release of hazardous energy while they work with
machines and equipment is referred to as _____. - CORRECT ANSWER lockout/ tagout
19. In a lockout/ tagout situation, a personal lock and tag must be removed by _____. -
CORRECT ANSWER the person who applied them
20. Hard hats should be made of fiberglass or _____. - CORRECT ANSWER reinforced
plastic
21. A good general rule about hearing protection is that it should be used if you must raise your
voice for someone to hear you when they are _____. - CORRECT ANSWER 2 feet (61 cm)
away
22. When there is the potential to be exposed to asbestos, workers must _____. - CORRECT
ANSWER report it to a supervisor and avoid disturbing it
23. The respirator that would be used where dust or solid particles might be inhaled is a _____. -
CORRECT ANSWER half mask or mouthpiece with a mechanical filter
24. One source of lead on some job sites is _____. - CORRECT ANSWER paint
25. Hepatitis can be caused by contact with _____. - CORRECT ANSWER Blood
26. One of the symptoms of heat stroke is _____. - CORRECT ANSWER extremely high body
temperature
27. Which of the following conditions is considered life threatening? - CORRECT ANSWER
Heat stroke
