STEERING AND SUSPENSION TEST |
COMPLETE QUESTIONS AND CORRECT
DETAILED ANSWERS | LATEST UPDATE
(2026) | ALREADY GRADED A+
A customer complains that the steering lacks power assist all the time. Tech a says that the
power steering pump drive belt could be slipping or loose. Tech b says that worn outer tie rod
ends could be the cause. Who is correct? - CORRECT ANSWER-Tech A
A front wheel drive vehicle pulls towards the right during hard acceleration. The most likely
cause is? - CORRECT ANSWER-Normal torque steer
When replacing a rubber-bonded socket the rod end, the tech should be sure to? - CORRECT
ANSWER-Install and tighten the replacement with the front wheels in the straight ahead
position
Whenever installing a tire on a rim, do not exceed - CORRECT ANSWER-40psi
Two technicians are discussing mounting a tire on a wheel. Tech a says that for best balance, the
tire should be match mounted. Tech b says that silicone spray should be used to lubricants the
tire bend. Which is correct? - CORRECT ANSWER-Tech A
Technician A says that radial tires should only be rotated front to rear, never side to side. Tech b
says that vehicle manufacturers usually recommend radial tires should be rotated using the
modified x method. Which is correct? - CORRECT ANSWER-Tech b
COMPLETE QUESTIONS AND CORRECT
DETAILED ANSWERS | LATEST UPDATE
(2026) | ALREADY GRADED A+
A customer complains that the steering lacks power assist all the time. Tech a says that the
power steering pump drive belt could be slipping or loose. Tech b says that worn outer tie rod
ends could be the cause. Who is correct? - CORRECT ANSWER-Tech A
A front wheel drive vehicle pulls towards the right during hard acceleration. The most likely
cause is? - CORRECT ANSWER-Normal torque steer
When replacing a rubber-bonded socket the rod end, the tech should be sure to? - CORRECT
ANSWER-Install and tighten the replacement with the front wheels in the straight ahead
position
Whenever installing a tire on a rim, do not exceed - CORRECT ANSWER-40psi
Two technicians are discussing mounting a tire on a wheel. Tech a says that for best balance, the
tire should be match mounted. Tech b says that silicone spray should be used to lubricants the
tire bend. Which is correct? - CORRECT ANSWER-Tech A
Technician A says that radial tires should only be rotated front to rear, never side to side. Tech b
says that vehicle manufacturers usually recommend radial tires should be rotated using the
modified x method. Which is correct? - CORRECT ANSWER-Tech b
