NFHS SOFTBALL Exam & Practice Exam Questions and
Answers Practice Questions with Solutions Newest |
Already Graded A+
Rule 1: Field & Equipment. Section 1 - The Field:
Article 2-b - Home Plate Distance
43 Feet from rear tip of home plate to front edge of pitcher's plate.
Rule 1: Field & Equipment. Section 2 -
Bases,Plates Article 3 - Pitcher's plate
Shall be 24 inches by 6 inches. Front edge Shall be 43 feet from the apex of
home plate.
Rule 1: Field & Equipment. Section 3 - Softballs
Article 8 - Authentication
The NFHS authenticating mark shall be on each ball.
Rule 1: Field & Equipment. Section 4 -
Gloves/Mitts Article 2 - catcher's mitt
The catcher shall wear a glove or mitt of any size
,Rule 1: Field & Equipment. Section 5 -
Bats Article 1 - c - the bat shall...
Be free of rattles, dents, burrs, cracks and sharp edges.
Rule 1: Field & Equipment. Section 5 -
Bats Article 1 - d - the bat shall...
Must bear either the 2000 or 2004 certification mark (ASA certification mark)
Rule 1: Field & Equipment. Section 5 - Bats
Article 2 - a - the bat shall consist of the following components...knob
Knob. The knob May be molded, lathed, welded and adjustable, but
must be permanently fastened. The knob may be covered in
grip tape.
Rule 1: Field & Equipment. Section 5 - Bats
Article 2 - c - the bat shall consist of the following components... Taper
It's length and material may vary
Rule 1: Field & Equipment. Section 6 - Batting Helmets
Article 1
A batting helmet with a permanently affixed NOCSAE stamp is mandatory for
each batter, on-deck batter, players/students in the coach's boxes, runners
or retired
runners. The batting helmet shall have a non glare (not mirror like) surface.
, 4/14/26, 1:56 AM NFHS SOFTBALL
Rule 1: Field & Equipment. Section 6 - Batting Helmets
Article 5
Batting helmets that are broken, cracked, dented or that have been altered are
prohibited from use.
Rule 1: Field & Equipment. Section 8 - Other Equipment
Article 4 - efensive players - face head protection. Eye shield
If an eye shield is worn attached to the face/head protection, it must be
constructed of molded, rigid material that is clear and permits 100% of
allowable light
transmission (no tint)
Rule 1: Field & Equipment. Section 1 - The Field:
Article 9 - non regulation facility
Once a game has started, if pitching distance, base distance or batter's boxes are
incorrect, the correction shall be made immediately.
Rule 1: Field & Equipment. Section 2 - Bases,Plates Article 1 - base color
First, second, and third shall be white. NOTE: by state association adoption, a
double first base is permitted. The base in foul territory shall be a color other than
white.
/ 2/28
Answers Practice Questions with Solutions Newest |
Already Graded A+
Rule 1: Field & Equipment. Section 1 - The Field:
Article 2-b - Home Plate Distance
43 Feet from rear tip of home plate to front edge of pitcher's plate.
Rule 1: Field & Equipment. Section 2 -
Bases,Plates Article 3 - Pitcher's plate
Shall be 24 inches by 6 inches. Front edge Shall be 43 feet from the apex of
home plate.
Rule 1: Field & Equipment. Section 3 - Softballs
Article 8 - Authentication
The NFHS authenticating mark shall be on each ball.
Rule 1: Field & Equipment. Section 4 -
Gloves/Mitts Article 2 - catcher's mitt
The catcher shall wear a glove or mitt of any size
,Rule 1: Field & Equipment. Section 5 -
Bats Article 1 - c - the bat shall...
Be free of rattles, dents, burrs, cracks and sharp edges.
Rule 1: Field & Equipment. Section 5 -
Bats Article 1 - d - the bat shall...
Must bear either the 2000 or 2004 certification mark (ASA certification mark)
Rule 1: Field & Equipment. Section 5 - Bats
Article 2 - a - the bat shall consist of the following components...knob
Knob. The knob May be molded, lathed, welded and adjustable, but
must be permanently fastened. The knob may be covered in
grip tape.
Rule 1: Field & Equipment. Section 5 - Bats
Article 2 - c - the bat shall consist of the following components... Taper
It's length and material may vary
Rule 1: Field & Equipment. Section 6 - Batting Helmets
Article 1
A batting helmet with a permanently affixed NOCSAE stamp is mandatory for
each batter, on-deck batter, players/students in the coach's boxes, runners
or retired
runners. The batting helmet shall have a non glare (not mirror like) surface.
, 4/14/26, 1:56 AM NFHS SOFTBALL
Rule 1: Field & Equipment. Section 6 - Batting Helmets
Article 5
Batting helmets that are broken, cracked, dented or that have been altered are
prohibited from use.
Rule 1: Field & Equipment. Section 8 - Other Equipment
Article 4 - efensive players - face head protection. Eye shield
If an eye shield is worn attached to the face/head protection, it must be
constructed of molded, rigid material that is clear and permits 100% of
allowable light
transmission (no tint)
Rule 1: Field & Equipment. Section 1 - The Field:
Article 9 - non regulation facility
Once a game has started, if pitching distance, base distance or batter's boxes are
incorrect, the correction shall be made immediately.
Rule 1: Field & Equipment. Section 2 - Bases,Plates Article 1 - base color
First, second, and third shall be white. NOTE: by state association adoption, a
double first base is permitted. The base in foul territory shall be a color other than
white.
/ 2/28
